1404417 PHOENIX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
https://www.phoenixcontact.com/pi/products/1404417 08/12/2021 Page 1 / 6 Power connector - SACC-M12MS-5CON-PG11-M PWR - 1404417 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Power connector, 5-position, Plug straight M12, Coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg11, external cable diameter 8 mm ... 10 mm Your advantages Safe use in the field, thanks to a high degree of protection Screw connection: proven connection technology for a large selection of different conductors Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356694490 Technical data Dimensions Diameter housing 20 mm Length 65.5 mm External cable diameter 8 mm ... 10 mm Stripping length of the sheath 20 mm Stripping length of the individual wire 5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Note Strip 22 mm off the cable sheath, shorten conductor for the fifth position by 10 mm. Strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductors with shortened ferrule:
https://www.phoenixcontact.com/pi/products/1404417 08/12/2021 Page 2 / 6 Power connector - SACC-M12MS-5CON-PG11-M PWR - 1404417 Technical data General 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm. NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. Rated current at 40°C 8 A (Contact 5: 2 A) when using 1.5 mm² conductors Rated voltage 48 V AC
60 V DC
Insulation resistance > 10 GΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Screw connection Conductor cross section AWG 18 ... 16 (without ferrule) 16 ... 18 (with ferrule) Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl) 1.5 Nm ... 2 Nm (Pressure screw with sleeve housing)
0.4 Nm (Screw plug insert with sleeve housing as far it will go)
0.2 Nm (Screw terminal blocks)
Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PA Material of grip body PA Material, knurls Zinc die-cast, nickel-plated Sealing material NBR (Cable clamping) Standards and Regulations Standards/specifications M12 connector IEC 61076-2-101 Flammability rating according to UL 94 V0 Standards/specifications M12 connector IEC 61076-2-101
https://www.phoenixcontact.com/pi/products/1404417 08/12/2021 Page 3 / 6 Power connector - SACC-M12MS-5CON-PG11-M PWR - 1404417 Technical data Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Schematic diagram 4 3 1 2 Pin assignment M12 male connector, 5-pos., A- coded, male side Dimensional drawing M12x1Ø20 65,5 18 19 Plug, M12 x 1, straight Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 11.0 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440104 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002062 ETIM 4.0 EC002062 ETIM 6.0 EC002062 ETIM 7.0 EC002635 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 UNSPSC 18.0 39121413
https://www.phoenixcontact.com/pi/products/1404417 08/12/2021 Page 4 / 6 Power connector - SACC-M12MS-5CON-PG11-M PWR - 1404417 Classifications UNSPSC UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413 Accessories Accessories Cable end sleeve Ferrule - A 1,5 - 7 - 3200263 Ferrule, length: 7 mm, color: silver Crimping tool Crimping pliers - CRIMPFOX 6H - 1212046 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry Protective cap Sealing cap - PROT-M12 FS-PA-CHAIN - 1430873 M12 sealing cap made of plastic with fixing band, for sensor cables, for free M12 plugs Screwdriver tools Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits
https://www.phoenixcontact.com/pi/products/1404417 08/12/2021 Page 5 / 6 Power connector - SACC-M12MS-5CON-PG11-M PWR - 1404417 Accessories Tool - SACC BIT M12-D20 - 1208445 Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2- component grip, with non-slip grip Stripping tool Stripping tool - WIREFOX 6SC - 1212158 Stripping tool, for cables and conductors (especially for cables protected against short circuits and ground leakages) 1.5 - 6 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm
https://www.phoenixcontact.com/pi/products/1404417 08/12/2021 Page 6 / 6 Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8
32825 Blomberg
Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com