2730 BURKERT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 33

Technical content

Visit product website  DATA SHEET Pneumatically actuated diaphragm valve with CLASSIC control actuator Type 8692  Digital electropneu- matic Positioner for the integrated mounting on process control valves Type 8693  Digital electropneumat- ic process controller for the integrated mounting on process control valves Type 8694  Digital electropneu- matic positioner for the integrated mounting on process control valves Type 8635  Digital electropneumat- ic Positioner SideCon- trol Type 8792  Digital electropneumat- ic Positioner SideCon- trol Type 8793  Digital electropneumat- ic Process Controller SideControl 1000490461 | Standard | EU | en | 202111 | 01 2/2 way diaphragm valve with pneumatic po- sition-actuator (Type Classic)

  • Valve housing in PVC, PP, PVDF and stainless steel
  • Stainless steel surfaces in contact with the product from Ra 0.38 µm…1.6 µm (optionally electropolished)
  • Diaphragms available in various materials and designs
  • Available in all common connection sizes and variants The externally controlled diaphragm valves, Type 2730 and 2731, consist of a pneumatically operated piston actuator, a built-in positioner, a diaphragm and a way valve housing. The proven and robust actuator with plastic housing ensures use under hygienic or aggressive environmental conditions. The flow-efficient valve housing with little dead space enables high flow rates and a wide range of possible uses. The valve housing and the diaphragm are available in all common materials and designs. The actuator has a compact, aut oclavable design (PPS version). The integration of automation TopControl units 8692/8693/8694 and SideControl units 8635/8792/8793 is possible in all e xpansion stages (can be retrofitted). An explosion-proof ATEX/IECEx device variant is available. The add-on housing is available in plastic or stainless steel. The actuator is equipped with an integrated, optical position indicator as standard, optionally a min./max. stroke limitation can be installed. Product variants described in the data sheet may differ from the product presentation and description. Type descriptionCan be combined with Type 2730_31 © Christian Bürkert GmbH & Co. KG, Subject to alteration

2 | 26 Visit product website  Table of contents 1. Gener al technical data 3 Approvals Materials 3.2. Pressure temperature diagram for plastic body 3.3. Material specifications 3.4. Example of available membrane materials 4. Dimensions 6 4.2. Valve system CLASSIC actuator with positioner 8692 process controller 8693 CLASSIC actuator with process controller 8694 CLASSIC actuator with positioner SideControl 8791/8792/8793 and remote sensor CLASSIC actuator with position sensor and SideControl 8635 4.3. Forged body (VS) with welded connection 4.4. Forged body (VS) with clamp connection 4.5. Tube valve body (VP) with welded connection 4.6. Cast body (VG) with welded connection 4.7. Cast body (VG) with clamp connection 4.8. Plastic body (PV, PD, PP) with flange connection 5. Device/P rocess connections 17 5.2. Medium pressure 6. P roduct accessories 18 Networking and combination with other Bürk ert products 7.2. Possible combinations for continuous CLASSIC valve system, Type 8802-DC/DD 8. Or dering information 25 8.2. Bürkert product filter 8.3. Bürkert product enquiry form

3 | 26 Visit product website  1. Gener al technical data Product properties Dimensions Detailed information can be found in chapter “4. Dimensions” on page 6. Material Forged body (VS)1.) Forged stainless steel 316L/1.4435/BN2, Fe < 0.5 %/C ≤ 0.03 % T ube valve body (VP)1.) Stainless steel 316L/1.4435/BN2 C ast body (VG)1.) Cast stainless steel 316L/1.4435 Plastic body (PV; PP; PD)1.) PVC (PVC-U); PP; PVDF Diaphr agm EPDM (AD)1.), PTFE/EPDM (EA)1.), advanced PTFE/EPDM (EU)1.), Gylon®/EPDM laminated (ER)1.) Actuator PA Diaphragm size 65, 80, 100 mm Standard surface quality Forged body (VS)1.) Internal electrically polished : Ra ≤ 0.38 µm (NO17)1.) (ASME BPE SF4/DIN HE4) xternal forged surface electrically polished) Internal mechanically polished Ra 0.5 µm (NO14)1.) (ASME BPE SF1) xternal forged surface) Tube valve body (VP)1.) Internal electrically polished : Ra ≤ 0.38 μm (NO17)1.) (ASME BPE SF4/DIN HE4) Ext ernal glass bead blasted: Ra 1.6 μm (NO01)1.) Internal glass bead blasted: Ra ≤ 1.6 μm (NO05)1.) Cast body (VG)1.) Internal electrically polished : Ra ≤ 0.6 µm (NO16)1.) (ASME BPE SF6) xternal cast surface electrically polished) Internal mechanically polished Ra 0.76 µm (NO06)1.) (ASME BPE SF3/DIN H2) xternal cast surface) Performance data Max. pilot pressure 6 bar, see “5.2. Medium pressure” on page 17 Pilot air ports Thread G Medium data Medium Neutral gases and fluids, highly purified, sterile, aggressive or abrasive medium (see Resistance Chart Medium temperature EPDM (AD) - 10…+ 143 (steam sterilisation 150 for 60 min) PTFE/EPDM (EA) - 10…+ 130 (steam sterilisation 140 for 60 min) Advanced PTFE/EPDM (EU) - 5…+ 143 (steam sterilisation 150 for 60 min) GYLON®/EPDM laminated (ER) - 5…+ 130 (steam sterilisation 140 for 60 min) Plastic body See “3.2. Pressure temperature diagram for plastic body” on page 5 Control medium Neutral gases, air Process/Port connection & communication Nominal diameter DN65…DN100 (2½"… 4") P ort connections For stainless steel body Welded connection DIN EN ISO 1127/ISO 4200/DIN 11866 series B DIN 11850 series 2/DIN 11866 series A/DIN EN 10357 series A ASME BPE/DIN 11866 series C Clamp connection DIN 32676 series A (DIN-pipe) DIN 32676 series B (ISO-pipe) ASME BPE For plastic body Loose flange DN65 Fixed flange DN80…DN100 Environment and installation Installation position/Installation See operating manual Ambient t emperature PA Actuator size 175 mm - 10…+ 50°C5.) 1.) This information is part of the product key (see product enquiry form at the end of this data sheet) 2.) Further versions on request 3.) Tube valve body (VP) also available with flange and threaded connections 4.) With plastic housings temperature limitation by housing material possible 5.) For standard version

4 | 26 Visit product website  2. Appr ovals Note: If you need one of these certificates, please contact your Bürkert partner. Approvals/ Conformity/ Certificate 1.)

Description

ATEX/IECEx2.) EPS 18 ATEX 2 008 X II Ex h IIC Gb/II Ex h IIIC T135 Db IECEx EPS 18.0007X Ex h IIC Gb/Ex h IIIC T135 Db TA air TA air 3.) 3-A (3-A Sanitary Standards Symbol Administrative Council)4.) The diaphragms made of EPDM (AD), PTFE/EPDM (EA), advanced PTFE/EPDM (EU) and GYLON®/ EPDM laminated (ER) are suitable for use with food and beverages (acc. to EC Regulation 1935/2004/ EC). Diaphragms made of EPDM (AD), PTFE/EPDM (EA), advanced PTFE/EPDM (EU) and GYLON®/EPDM laminat ed (ER) are acc. to USP Class VI tested. FDA Diaphragms made of EPDM (AD), PTFE/EPDM (EA), advanced PTFE/EPDM (EU) and GYLON®/EPDM laminat ed (ER) comply with the Code of Federal Regulations published by the FDA (Food and Drug Administr ation, USA). 1.) Further approvals/conformity clarification/certificates on request 2.) Only in combination with variable code “PX51” (see product enquiry form at the end of this data sheet) 3.) Only in combination with variable code “PM01” (see product enquiry form at the end of this data sheet) 4.) Only in combination with variable code “PE05” (see product enquiry form at the end of this data sheet) 3. Mat erials 3.1. Chemical Resistance Char t – Bürkert resistApp Bürkert resistApp – Chemical Resistance Chart You want to ensure the reliability and durability of the materials in your individual application case? Verify your combination of media and materials on our website or in our resistApp. Start Chemical Resistance Check

5 | 26 Visit product website  3.2. P ressure temperature diagram for plastic body Note: This information is important for material selection. Observe the permissible operating pressure depending on the medium tempera- ture. 0 20 40 60 80 100 120 140 Operating pressure [bar] Temperature [ºC] DN65…100 PVC DN65…80 DN100 3.3. Mat erial specifications Actuator size 175 and 225 Note: Exemplary representation may differ from the actual product. No. Element Material

1 Cover Polyamide

2 Pilot air ports Stainless

1.4305

3 Attachment housing Stainless

1.4308

4 Diaphragm EPDM

(AD), PTFE/EPDM (EA), advanced PTFE/EPDM (EU), Gylon®/EPDM laminated (ER) 5 V alve body See “1. General technical data” on page

6 | 26 Visit product website  3.4. Example of available membr ane materials The diaphragms have been developed to meet the unique challenges of hygienic and sterile requirements. Bürkert offers diaphragms with precise material composition and high accuracy. Bürkert diaphragms are available in a wide range of materials which have been t ested and proven in

applications

beverage, biotechnology, pharmaceutical and cosmetics industries. The dia- phragms are tested during development and production to ensure reliability under difficult process conditions.

  • EPDM (AD)
  • PTFE/EPDM (EA)
  • advanced PTFE/EPDM (EU)
  • Gylon®/EPDM laminated (ER) For further information please refer to our flyer “Diaphragm competence for hygienic applications” on our website 4. Dimensions 4.1. Actuat or Note: Dimensions in mm, unless otherwise stated K C H A DN Actuator size Ø ØA C K H 65 175 210 130 G ¼ 337 80 175 210 130 G ¼ 337 225 261 155 G ¼ 334 100 225 261 155 G ¼ 334

7 | 26 Visit product website  4.2. V alve system CLASSIC actuator with positioner 8692 / process controller 8693 Note: Dimensions in mm, unless otherwise stated CLASSIC actuator with positioner 8692 CLASSIC actuator with process controller 8693 Ø 91 Ø E HM Ø 91 Ø E HM DN Actuator size Ø ØE HM 65 175 210 497 80 175 210 497 225 261 495 100 225 261 492 DN Actuator size Ø ØE HM0 65 175 210 497 80 175 210 497 225 261 495 100 225 261 492

8 | 26 Visit product website  CLASSIC actuator with process controller 8694 Note: Dimensions in mm, unless otherwise stated Ø E Ø 91 HM DN Actuator size Ø ØE HM 65 175 210 457 80 175 210 457 225 261 454 100 225 261 452

9 | 26 Visit product website  CLASSIC actuator with positioner SideControl 8791/8792/8793 and remote sensor 8798 Note: Dimensions in mm, unless otherwise stated Ø E HM Ø 91 81.9 81.8 171 144.6 45 2x M4 DN Actuator size Ø ØE HM 65 175 210 458 80 175 210 458 225 261 455 100 225 261 453

10 | 26 Visit product website  CLASSIC actuator with position sensor and SideControl 8635 Note: Dimensions in mm, unless otherwise stated Ø E HM C Ø 69 211 DN Actuator size Ø ØE C HM 65 175 210 209 458 80 175 210 209 458 225 261 234 455 100 225 261 234 453

11 | 26 Visit product website  4.3. F orged body (VS) with welded connection Note:

  • Dimensions in mm, unless otherwise stated
  • For detailed information on the draining angle, please refer to the “Additional manual Type 2xxx 3xxx” on our website (see operating instructions s L H h Diaphragm size Port connection DN Ø D1 s L h H Product key 1.) DIN EN ISO 1127/ISO 4200/DIN 11866 series B 80 65 76.1 2.0 250 51 98.1 SA48 80 80 88.9 2.3 250 51 98.1 SA49 DIN 11850 series 2/DIN 11866 series A/DIN EN 10357 series A 80 65 70 2.0 250 51.0 98.1 SD48 80 80 85 2.0 250 51.0 98.1 SD49 ASME BPE/DIN 11866 series C 80 2½" 63.5 1.65 250 51.0 98.1 SODJ 80 3" 76.2 1.65 250 51.0 98.1 SODK BS 4825 80 80 63.5 1.65 250 51.0 98.1 SODJ 80 80 76.2 1.65 250 51.0 98.1 SODK 1.) This information is part of the product key (see product enquiry form at the end of this data sheet).

12 | 26 Visit product website  4.4. F orged body (VS) with clamp connection Note:

  • Dimensions in mm, unless otherwise stated
  • For detailed information on the draining angle, please refer to the “Additional manual Type 2xxx 3xxx” on our website (see operating instructions L H s h Diaphragm size Port con- nection DN Ø D1 s Ø D2 L h H Product key1.) Variable Code 1.) ASME BPE 65 2½" 63.5 1.65 77.5 249 43 83.5 TG07 – 80 2½" 63.5 1.65 77.5 216 51 98.1 TG07 – 80 3" 76.2 1.65 91.0 222 51 98.1 TG08 – 1.) This information is part of the product key (see product enquiry form at the end of this data sheet).

13 | 26 Visit product website  4.5. T ube valve body (VP) with welded connection Note:

  • Dimensions in mm, unless otherwise stated
  • For detailed information on the draining angle, please refer to the “Additional manual Type 2xxx 3xxx” on our website (see operating instructions s L H h Diaphragm size Port connection DN Ø D1 s L h H Product key1.) ASME BPE/DIN 11866 series C 65 3" 76.2 1.65 250 46.3 84.4 SODK 80 4" 101.6 2.11 295 60 110.8 SODL 1.) This information is part of the product key (see product enquiry form at the end of this data sheet)

14 | 26 Visit product website  4.6. C ast body (VG) with welded connection Note:

  • Dimensions in mm, unless otherwise stated
  • For detailed information on the draining angle, please refer to the “Additional manual Type 2xxx 3xxx” on our website (see operating instructions L H s h Diaphragm size Port connection DN Ø D1 s L h H Product key 1.) DIN EN ISO 1127/ISO 4200/DIN 11866 series B 65 65 76.1 2.0 192 43.0 82.0 SA48 80 80 76.1 2.0 250 51.0 101.0 SA48 80 80 88.9 2.3 250 51.0 101.0 SA49 100 100 114.3 2.3 295 63.5 123.5 SA39 DIN 11850 series 2/DIN 11866 series A/DIN EN 10357 series A 65 65 70 2.0 192 43.0 82.0 SD48 80 80 85 2.0 250 51.0 101.0 SD49 100 100 104 2.0 295 63.5 123.5 SD50 ASME BPE/DIN 11866 series C 65 2½" 63.5 1.65 192 43.0 82.0 SODJ 80 3" 76.2 1.65 250 51.0 101.0 SODK 100 4" 101.6 2.11 295 63.5 123.5 SODL BS 4825 65 65 63.5 1.65 192 43.0 82.0 SODJ 80 80 76.2 1.65 250 51.0 101.0 SODK 100 100 101.6 2.11 295 63.5 123.5 SODL 1.) This information is part of the product key (see product enquiry form at the end of this data sheet).

15 | 26 Visit product website  4.7. C ast body (VG) with clamp connection Note:

  • Dimensions in mm, unless otherwise stated
  • For detailed information on the draining angle, please refer to the “Additional manual Type 2xxx 3xxx” on our website (see operating instructions ØD1 ØD2 L H s h Diaphragm size Port connec- tion DN Ø D1 s Ø D2 L h H Product key1.) ASME BPE 80 3" 76.2 1.65 91 306.2 51.0 101.0 T G08 1.) This information is part of the product key (see product enquiry form at the end of this data sheet).

16 | 26 Visit product website  4.8. Plastic body (PV , PD, PP) with flange connection Note: Dimensions in mm, unless otherwise stated K N L H h D Diaphragm size L Ø D2 Ø D3 K H h Ø D W N Product key1.) PVC-U (PV), PVDF (PD) and PP (PP) 65 290 145 185 19 92 47 18 4x90° 10 FL30 80 310 160 200 36 107 50 18 8x45° – FF31 100 350 180 225 35 134.5 65.5 18 8x45° – FF31 1.) This information is part of the product key (see product enquiry form at the end of this data sheet).

17 | 26 Visit product website  5. Device/P rocess connections 5.1. Flow char acteristics For further information please use our data sheet on flow characteristics on our homepage Type 273x Flow-rate curves for dia- phr agm valves 5.2. Medium pr essure Information for control function A Note:

  • For low operating pressures, optional versions with reduced spring force (EC04) are recommended.
  • Pressure data [bar]: Overpressure to atmospheric pressure. Valve closes dynamically against max. operating pressure.
  • Information for control function B and I on request. Diaphragm size Actuator size Ø Pilot pressure Max. operating pressure for seal material EPDM, FKM PTFE/EPDM, advanced PTFE/EPDM, GYLON®/EPDM laminated DN [mm] [bar] [bar] [bar] 65 175 (K) 5.0…6 8 5 80 175 (K) 5.0…6 5 4.5 225 (L) 5.0…6 10 71.) 100 225 (L) 5.0…6 8 4 2.) Max. operating pressure for GYLON®/EPDM laminated is 8.5 bar

18 | 26 Visit product website  6. P roduct accessories Process controller TopControl Type 8693 Actuat or size Ø 175/225 mm The intelligent process controller Type 8693 is designed for integrated mounting on pneumatic actuat ors from the process control valve series Type 23xx/2103 and especially for the require- ments of hygienic process conditions. Using the TUNE-Functions, the process controller and positioner can be initialized automatically. Easy operation and selection of additional software functions as well as parameterization are carried out via the large graphic display and the k eypad. Device configuration and parameterization can also be conveniently carried out by the Bürk ert Communicator software tool via a PC interface.

Features

  • Contact-free position sensor
  • Universal positioning system for single and double-acting actuators
  • Ultra dynamic positioning system without air consumption in steady state
  • Integrated diagnostic functions for valve monitoring
  • Automatic initialization of the positioner and process controller using the TUNE-Function
  • Defined safe position in case of electrical or pneumatic auxiliary power failure
  • PROFIBUS DP-V1, EtherNet/IP, PROFINET, Modbus TCP, Bürkert system bus (büS)
  • Compact and robust hygienic stainless steel design Customer benefits
  • Quick and easy commissioning
  • Intuitive and simple operation via graphic display with backlight and keypad
  • High degree of system availability due to increased actuator service life by means of spring chamber ventilation
  • Guar anteed reliability and predictable maintenance through valve monitoring and diagnos- tics
  • Easy maintenance and process monitoring

19 | 26 Visit product website  Positioner TopControl Type 8692 Actuat or size Ø 175/225 mm The intelligent electropneumatic positioner Type 8692 is designed for integrated attachment t o pneumatic actuators of the process control valve series Type 23xx/2103 and especially for the requirements of hygienic process conditions. The positioner can be initialized automatically using the TUNE-Function. Easy operation and the selection of the extensive additional softwar e functions as well as parameterization are carried out via the large graphic display and keypad. The device configuration and parameterization can also be conveniently carried out using the Bürk ert Communicator software tool via a PC interface.

  • Contact-free position sensor
  • Universal positioning system for single and double-acting actuators
  • Ultra dynamic positioning system without air consumption in steady state
  • Integrated diagnostic functions for valve monitoring
  • Automatic initialization of the positioner by means of the TUNE-Function
  • Defined safe position in case of electrical or pneumatic auxiliary power failure
  • PROFIBUS DP-V1, EtherNet/IP, PROFINET, Modbus TCP, Bürkert system bus (büS)
  • Compact and robust hygienic stainless steel design Customer benefits
  • Quick and easy commissioning
  • Intuitive and simple operation via graphic display with backlight and touch keypad
  • High degree of system availability due to increased actuator service life by means of spring chamber ventilation
  • Guar anteed reliability and predictable maintenance through valve monitoring and diagnos- tics Positioner TopControl BASIC Type 8694 Actuat or size Ø 175/225 mm

The compact positioner Type 8694/8696 is designed for integrated attachment to pneumatic actuat ors of the Type 23xx/2103 process control valve series and especially for the require- ments of hygienic process conditions. Operation and parameterization are performed via push butt ons and DIP switches. The device configuration and parameterization can also be conven- iently carried out using the Bürkert Communicator software tool via a PC interface.

  • Contact-free position sensor
  • Universal positioning system for single and double-acting actuators
  • Ultra dynamic positioning system without internal control air consumption
  • AS-Interface, IO-Link, Bürkert system bus (büS) (only 8694)
  • Compact and robust hygienic stainless steel design Customer benefits
  • Simple and safe commissioning through Teach-In function
  • Minimum space requirement in the plant pipework for more flexibility in plant design
  • High degree of system availability due to increased actuator service life by means of spring chamber ventilation

20 | 26 Visit product website  Process controller SideControl Remote Type 8793 with Remote Sensor 8798 Actuat or size Ø 175/225 mm The intelligent digital positioner/process controller Type 8793 is designed for mounting on lift or swivel drives with standardization in accordance with IEC 534 or VDI/VDE 3845 and is designed for demanding control tasks. The version with remote position sensor Type 8798 is used to control Bürkert process control valves. It is operated via a backlit graphic display. The initialization of process and positioner can be done automatically by means of TUNE-Function. Her e the type of controlled system is automatically recognized and the appropriate controller structur e with the corresponding optimum parameter set is determined.

  • Universal control system for single and double-acting actuators
  • Integrated diagnostic functions for valve monitoring
  • Automatic initialization of the position and process controller by means of TUNE-Function
  • Ultra dynamic actuating system without internal control air consumption.
  • Illuminated graphic display with keypad
  • PROFIBUS DP-V1, EtherNet/IP, PROFINET, Modbus TCP, Bürkert system bus (büS)
  • Compact and robust design
  • Adaptation acc. to IEC 534 or VDI/VDE 3845 for lift and swivel drives or as remote ver- sion on Bürkert process valves Customer benefits
  • Quick and easy commissioning
  • Intuitive and simple operation via graphic display with backlight and keypad.
  • Guaranteed reliability and scheduled maintenance thanks to valve monitoring and diagnos- tics.
  • Easy maintenance and process monitoring
  • Long service life

21 | 26 Visit product website  Positioner SideControl Remote Positioner Type 8792 with Remote Sensor Type 8798 Actuat or size Ø 175/225 mm The intelligent digital position/process controller Type 8792 is designed for attachment to lift and swivel drives with standardization according to IEC 534 or VDI/VDE 3845 for demanding contr ol tasks. The Type 8798 version with remote position sensor is used to control Bürkert pr ocess control valves. It is operated via a backlit graphic display. The initialization of process and positioner can be done automatically by means of TUNE-Function.

  • Illuminated graphic display with touch screen
  • Universal control system for single and double-acting actuators
  • Ultra dynamic actuating system without internal control air consumption.
  • Integrated diagnostic functions for valve monitoring
  • PROFIBUS DP-V1, EtherNet/IP, PROFINET, Modbus TCP, Bürkert system bus (büS)
  • Compact and robust design
  • Adaptation acc. to IEC 534 or VDI/VDE 3845 for lift and swivel drives or as remote ver- sion on Bürkert process valves Customer benefits
  • Quick and easy commissioning
  • Intuitive and simple operation via backlit graphic display and keypad.
  • Guaranteed reliability and scheduled maintenance thanks to valve monitoring and diagnos- tics.
  • Long service life Positioner SideControl BASIC Remote Positioner Type 8791 with Remote Sensor Type 8798 Actuat or size Ø 175/225 mm

The positioner Type 8791 is designed for mounting on lift or swivel drives with standardization in accordance with IEC 534 or VDI/VDE 3845 designed for simple control tasks. The variant with the remote sensor Type 8798 is used to control Bürkert process control valves. All operat- ing elements are located inside the housing.

  • Simple design
  • Universal control system for single and double-acting actuators
  • Ultra dynamic positioning system without air consumption in steady state
  • Adaptation according to IEC 534 or VDI/VDE 3845 for lift and swivel drives or as remote version on Bürkert process valves
  • AS-Interface, IO-Link, Bürkert system bus (büS) (only for Positioner Type 8791 BASIC Remot Customer benefits
  • Quick and easy commissioning
  • Simple device for simple control tasks
  • Low energy consumption

22 | 26 Visit product website  Positioner/Process controller with remote SideControl Type 8635 2-wire, intrinsically safe Actuator size Ø 175/225 mm The Type 8635 is an electro-pneumatic positioner with optional integrated process controller for precise control tasks. The robust design with integrated LCD plain text display was devel- oped for demanding industry. Customer benefits

  • Time-saving algorithms for temperature, flow and pressure PID parameters through Process TUNE function.
  • Fast and easy menu-driven parameterisation via keyboard input or PROFIBUS PA.
  • Instrument supply via setpoint signal 20 mA
  • Adaption acc. to IEC534 for stroke and rotary actuators
  • Robust body made of hard-coated and plastic-coated aluminium
  • Explosion-proof versions for zone zone or zone

23 | 26 Visit product website  7. Networking and combination with other Bürk ert products 7.1. P ossible combinations for continuous CLASSIC valve system Type 8802-DC/DD The continuous CLASSIC valve system, Type 8802-DC/8802-DD, consists of a diaphragm control valve Type 2730/2731 and a digital electropneumatic positioner, Type 8692, a digital electropneumatic process controller, Type 8693, a digital electropneumatic positioner basic, Type 8694 (below) or a SideControl Type 8635 or a electropneumatic positioner, Type 8792 or 8793. Note:

  • For the configuration of further valve systems, please use the product enquiry form at the end of this document.
  • You order two components and receive a completely assembled and tested valve. Diaphragm control valve Process controller TopControl Positioner TopControl Type 2730/2731 Type 8693  Digital electr opneumatic process controller for the in- tegrated mounting on process control valves Type 8692  Digital electr opneumatic Positioner for the integrated mounting on process control valves Type 8694  Digital electr opneumatic Positioner for the integrated mounting on process control valves Diaphragm control valve with desired control unit Continuous valve system CLASSIC Type 8802-DC-I CLASSIC Type 8802-DD-I Type 2730 8692 T ype 2731 8692 Continuous valve syst em CLASSIC Type 8802-DC-J CLASSIC Type 8802-DD-J Type 2730 8693 T ype 2731 8693 Continuous valve syst em CLASSIC Type 8802-DC-L CLASSIC Type 8802-DD-L Type 2730 8694 T ype 2731 8694

24 | 26 Visit product website  7.2. P ossible combinations for continuous CLASSIC valve system, Type 8802-DC/DD The continuous CLASSIC valve system, Type 8802-DC/8802-DD, consists of a diaphragm control valve, Type 2730/2731, and a digital electropneumatic positioner, Type 8692, a digital electropneumatic process controller, Type 8693, a digital electropneumatic positioner basic, Type 8694 (below) or a SideControl, Type 8635, or and a electropneumatic positioner, Type 8792 or 8793. Note:

  • For the configuration of further valve systems, please use the product enquiry form at the end of this document.
  • You order two components and receive a completely assembled and tested valve. Diaphragm control valve Positioner/Process con- troller Positioner Process controller Type 2730/2731 Type 8635  Digital electr opneumatic Positioner SideControl Type 8792  Digital electr opneumatic Positioner SideControl Type 8793  Digital electr opneumatic Pro- cess Controller SideControl Diaphragm control valve with desired control unit Valve system Continuous CLASSIC Type 8802-DC-B CLASSIC Type 8802-DD-B Type 2730 8635 T ype 2731 8635 V alve system Continuous CLASSIC Type 8802-DC-P CLASSIC Type 8802-DD-P Type 2730 8792 T ype 2731 8792 V alve system Continuous CLASSIC Type 8802-DC-Q CLASSIC Type 8802-DD-Q Type 2730 8793 T ype 2731 8793

25 | 26Visit product website  8. Or dering information 8.1. Bürk ert eShop – Easy ordering and quick delivery Bürkert eShop – Easy ordering and fast delivery You want to find your desired Bürkert product or spare part quickly and order dir ectly? Our online shop is available for you 24/7. Sign up and enjoy all the benefits. Order online now 8.2. Bürk ert product filter Bürkert product filter – Get quickly to the right product You want to select products comfortably based on your technical requirements? Use the Bürkert product filter and find suitable articles for your application quickly and easily Try out our product filter 8.3. Bürk ert product enquiry form Bürkert product enquiry form: Would you like to make a specific product enquiry based on your technical requirements? Please use our product enquiry form at the end of this data sheet. There you will find all the information relevant to your Bürkert contact person that will help us to process your enquiry in the best possible way. Bürkert specification key: In our product enquiry form you will find a complete explanation of the composition of our specification k ey. You will find our product enquiry form at the end of this data sheet.

Bürkert – Close to You Austria Belgium Czech Republic Denmark Finland France Germany Italy Netherlands Norway Poland Spain Sweden Switzerland Turkey United Kingdom China Hong Kong India Japan Korea Malaysia Philippines Singapore Taiwan South Africa Russia United Arab Emirates Brazil Uruguay Canada USA Australia New Zealand Credits, © and concept: Christian Bürkert GmbH & Co. KG | Photographs: Marc Eggimann Fotografie - 4051 Basel | Scanner GmbH - Werbeagentur Künzelsau -

74653 Künzelsau

www.burkert.com

Diaphragm valve with straight way valve, T-valve or tank bottom valve 1 | 5Visit this product area on the website  © Christian Bürkert GmbH & Co. KG, subject to change Product Enquiry Form - Diaphragm valve with globe valve, T-valve or tank bottom valve Thank you for your interest in our products! In order to provide you with optimum advice, please fill out the following form and send it to your Bürkert r epresentative or e-mail address: info@burkert.com. All information submitted will of course be kept strictly confidential. Please fill in the required fields! *Note: The interactive functions of this PDF may be restricted depending on the PDF reader used. Personal Information Company Contact person Customer no. Department Street Postcode / Town Telephone no. Email Delivery Required delivery date Operating data Process medium Medium Liquid S team Gas CIP SIP Medium temperature Tmed Medium pr essure Pmed Valve data Surface quality (valid for stainless steel) Standard: Ra 0.5 internal Ra 0.38 e-pol internal Plastic Non standard: internal external Body material Body design 2 way valve T -valve Tank bottom valve Seal material E P D M PTFE GYLON® others Nominal diamet er DN Pilot pressure m i n . max. Connection W eld end EN ISO 1127 ISO 4200 DIN 11866 B DIN 11850 DIN 11866 A ASME BPE DIN 11866 C Clamp connection DIN 32676 B (ISO tube (ISO4200)) DIN 32676 A (DIN tube (DIN11850)) ASME BPE Plastic Flange Threated Spigot Others Article no. (if known) Are you interested in ordering a complete Valve System Open/Close or Continuous? For more information on Valve Systems Open/Close or Continuous, please visit our Website Additional Requirements / Comment

Diaphragm valve with straight way valve, T-valve or tank bottom valve 2 | 5Visit this product area on the website  © Christian Bürkert GmbH & Co. KG, subject to change Specification key Note:

  • Please fill out this Product Inquiry Form as completely as possible!
  • For more information on Valve Systems Open/Close or Continuous, please visit our Website
  • See Specification key - Examples how to fill in the specification key. Quantity Type Control function Nominal diameter diaphr agm Diaphragm material Body material Port connection Port connection Actuator version Actuator size Pilot air port Actuator Variable Variable Variable Key Feature T YP SF DN DWST WKST LTA1 LTA2 ANTA ANTG STLA ANTR * VAR1 VAR2 VAR3 Key No.  1 2 3 4 5 6 6 7 8 9 10 V1 V2 V3

1 Selection  *

2 Selection  *

3 Selection  *

4 Selection  *

5 Selection  *

6 Selection  *

Diaphragm valve with straight way valve, T-valve or tank bottom valve 3 | 5Visit this product area on the website  © Christian Bürkert GmbH & Co. KG, subject to change Specification key - Examples 2 way diaphragm valve Type 2030 CLASSIC with plastic body Type 2031  CLASSIC with stainless st eel body Type 2063  INOX with stainless st eel body Type 2103  ELEMENT with stain- less steel or plastic body Type 3232  Manually operated with plastic body Type 3233  Manually operated with stainless steel body T-diaphragm valve Type 2032 CLASSIC T-valve Type 2064  INOX T-valve Type 2104  ELEMENT T-valve Type 3234  Manually operated T-valve Tank bottom diaphragm valve Type 2033 CLASSIC Tank bottom valve Type 2065  INOX Tank bottom valve Type 2105  ELEMENT Tank bottom valve Type 3235  Manually operated tank bottom valve Type Control function Nominal diameter diaphr agm Diaphragm material Body material Port connection Port connection Actuator version Actuator size Pilot air port Actuator Variable Variable Variable Key Feature T YP SF DN DWST WKST LTA1 LTA2 ANTA ANTG STLA ANTR * VAR1 VAR2 VAR3 Key No.  1 2 3 4 5 6 6 7 8 9 10 V1 V2 V3 2 way diaphragm valve Type 2030 CLASSIC 2030 A 20.0 AD PV KM26 – C E – – Type 2031 CLASSIC 2031 A 20.0 AD VS SA93 – C E – – NK52 NO14 Type 2063 INOX 2063 A 20.0 AD VS SA93 – H M – – NK52 NO14 Type 2103 ELEMENT 2103 A 20.0 AD PV KM26 – G M FA01 – Type 2103 ELEMENT 2103 A 20.0 AD VS SA93 – G M FA01 – NK52 NO14 Type 3232 3232 – 20.0 AD PV KM26 – – – – D050 Type 3233 3233 – 20.0 AD VS SA93 – – – – D051 NK52 NO14 T-diaphragm valve Type 2032 CLASSIC 2032 A 20.0 AD VH SODH SA93 D E – – NK52 NO14 Type 2064 INOX 2064 A 20.0 AD VH SODH SA93 – M – – NK52 NO14 T ype 2104 ELEMENT 2104 A 20.0 AD VH SODH SA93 – M FA01 – NK52 NO14 Type 3234 3234 – 20.0 AD VH SODH SA93 – – – D050 NK52 NO14 Tank bottom diaphragm valve Type 2033 CLASSIC 2033 A 20.0 AD VH SA93 – D F – – NK52 NO14 Type 2065 INOX 2065 A 20.0 AD VH SA93 – – M – – NK52 NO14 T ype 2105 ELEMENT 2105 A 20.0 AD VH SA93 – – M FA01 – NK52 NO14 Type 3235 3235 – 20.0 AD VH SA93 – – – – D050 NK52 NO14 1.) NK52, NOxx only for stainless steel bodies

Diaphragm valve with straight way valve, T-valve or tank bottom valve 4 | 5Visit this product area on the website  © Christian Bürkert GmbH & Co. KG, subject to change Key Legend Note:

  • Other versions on request
  • Available Type sizes see corresponding data sheet Key no. 2: Control function (SF) A Closed with spring force B Open with spring force I Without pressure spring Key no. 3: Nominal diameter diaphragm (DN) 8 25 50 100 15 32 65 20 40 80 Key no. 4: Diaphragm material (DWST) AD EPDM EA PTFE/EPDM EU Advanced PTFE/EPDM laminated ER Gylon®/EPDM laminated Key no. 5: Body material (WKST) PD PVDF (Polyvinylidene fluoride) PP PP (Polypropylene) PV PVC-U (Polyvinyl chloride) VG Stainless steel precision casting 1.4435/316L VH Stainless steel block material 1.4435/316L VI Stainless steel block material 1.4435 BN2/316L ASME BPE VP Stainless steel tube 1.4435 BN2/316L VS Stainless steel-forged 1.4435 BN2/316L ASME BPE Key no. 6: Port connection (LTA1, LTA2) Listed in detail below Key no. 7: Actuator version (ANTA) C PA actuator (only CLASSIC) D PPS actuator (only CLASSIC) G ELEMENT design actuator (only ELEMENT) H St. St. actuator (only INOX) Key no. 8: Actuator size (ANTG) B ø C ø 40 D ø E ø F ø G ø 100 H ø 125 K ø 175 L ø 225 M ø N ø 90 P ø 130 Key no. 9: Pilot air port (ELEMENT) (STLA) FA01 Pilot air port Push-In 6/4, FA02 Pilot air port FA03 Interface ELEMENT control Key no. 10: Actuator (ANTR) D050 Handwheel and attachment PPS D0511.) Handwheel PPS and attachment St. St. D0522.) Handwheel and attachment St. St. 1.) Alternatively D058 2.) Alternatively D059 or D102 Key no. V1, V2, …: Variable code (VAR1, VAR2, VAR3) NK52 3.) Acceptance test certificate 3.1 according to EN 10204 NO143.) Mechanically polished Ra ≤ 0.5 μm (ASME BPE SF1) NO173.) Electropolished Ra ≤ 0.38 μm (ASME BPE SF4 / DIN HE4) NO063.) Mechanically polished Ra ≤ 0.76 μm (ASME BPE SF3 / DIN H2) NO163.) Electropolished Ra ≤ 0.6 μm (ASME BPE SF6) EC04 Reduced spring for ce 3.) NK52, NOxx only for stainless steel bodies Key no. 6: Port connection (LTA) Weld connection DN [mm] EN ISO 1127 / ISO 4200 DIN 11866 R. B SMS 3008 DIN 11850 R. 0 DIN 11850 R. 1 DIN 11850 R. 2 DIN 11866 R. A DIN 11850 R. 3 BS4825 ASME BPE DIN 11866 R. C

Diaphragm valve with straight way valve, T-valve or tank bottom valve 5 | 5Visit this product area on the website  © Christian Bürkert GmbH & Co. KG, subject to change Clamp connection DN [mm] Clamp 34,0 similar to DIN 32676 R. B (ISO tube (ISO4200)) DIN 32676 R. A (DIN tube (DIN11850)) DIN 32676 R. B (ISO tube (ISO4200)) ASME BPE BS 4825 (Clamp BS 4825-3, tube BS 4825-1) 8 TC51-13.5×1.6 Cl: 34.0 TD40-10.0×1.0 Cl: 25.0 TC40-13.5×1.6 Cl: 25.0 TG 50-6.35×0.89 Cl: 25.0 – 10 TC41-17.2×1.6 Cl: 34.0 TD41-13.0×1.5 Cl: 34.0 TC53-17.2×1.6 Cl: 25.0 TG 01-9.53×0.89 Cl: 25.0 – 15 TC42-21.3×1.6 Cl: Cl: 34.0 TC52-21.3×1.6 Cl: 50.5 TG 02-12.7×1.65 Cl: 25.0 TH42-12.7×1.2 Cl: 25.0 20 – TD43-23.0×1.5 Cl: 34.0 TC43-26.9×1.6 Cl: 50.5 TG 03-19.05×1.65 Cl: Cl: 25.0 25 – TD44-29.0×1.5 Cl: 50.5 TC44-33.7×2.0 Cl: 50.5 TG 04-25.4×1.65 Cl: 50.5 – 40 – TD46-41.0×1.5 Cl: 50.5 TC46-48.3×2.0 Cl: 64.0 TG 05-38.1×1.65 Cl: 50.5 – 50 – TD47-53.0×1.5 Cl: 64.0 TC47-60.3×2.0 Cl: 77.5 TG 06-50.8×1.65 Cl: 64.0 – Cl: 91.0 TG 07-63.5×1.65 Cl: 77.5 – Cl: 106.0 TG 08-76.2x,65 Cl: 91.0 – Cl: 130.0 TG 09-101.6×2.11 Cl: 119.0 Plastic connection DN [mm] Welded connection socket (only WKST=PD, PP) Welded connection threated socket (only WKST=PD, PP) Adhesive bond socket (only WKST=PV) Adhesive bond threated socket (only WKST=PV) Loose-type flange (up to DN65) Fixed flange (from DN80)

15 SS25

ø20 SM25 ø20 KS25 ø20 KM25 ø20 FL24

20 SS26

ø25 SM26 ø25 KS26 ø25 KM26 ø25 FL25

25 SS27

ø32 SM27 ø32 KS27 ø32 KM27 ø32 FL26

32 SS28

ø40 SM28 ø40 KS28 ø40 KM28 ø40 FL27

40 SS29

ø50 SM29 ø50 KS29 ø50 KM29 ø50 FL28

50 SS30

ø63 SM30 ø63 KS30 ø63 KM30 ø63 FL29 65 – – – – FL30 80 – – – – FF31 100 – – – – FF32

Positioner / process controller TopControl and SideControl Remote for control valves of the ELEMENT series 1 | 2Visit this product area on the website  © Christian Bürkert GmbH & Co. KG, subject to change Positioner / process controller TopControl for control valves of the ELEMENT series For actuator size ø70/ø90/ø130 mm P rocess Controller TopControl Type 8693  P ositioner TopControl Type 8692

  • Intelligent digital positioners and process contr ollers with integrated PID controller for accur ate process control
  • Lighted graphic display with membrane k eypad
  • Tune function for automatic start-up
  • Field bus communication
  • Diagnostic functions
  • Digital positioner without sensor input
  • Lighted graphic display with membrane k eypad
  • Tune function for automatic start-up
  • Field bus communication
  • Diagnostic functions Pneumatic function Single-acting Double-acting Electrical connection C able gland M12 Multipole connection Without Digital Communication PROFIBUS DP-V1 DeviceNet EtherNet/IP PROFINET Bürkert Systembus (büS)1.) Modbus TCP Without Approvals ATEX cat. 3GD, IECEx Without Analogue feedback 0/4…20 mA 0/4…20 mA binary outputs Digital outputs and diagnostics Y e s No 1.) Based on CANopen For actuator size ø70/ø90/ø130 mm For actuator size ø50 mm P ositioner TopControl BASIC Type 8694  P ositioner TopControl BASIC Type 8696
  • Status LED and DIP switches
  • Tune-function for automatic start-up
  • Positioning system for single-acting actu- ators
  • Field bus communication
  • Status LED and DIP switches
  • Tune-function for automatic start-up
  • Positioning system for single-acting actu- ators Pneumatic function Single-acting Electrical connection C able gland1.) M12 Multipole connection Without Digital Communication AS-Interface1.) IO-Link Bürkert Systembus (büS)2.) Without Appr ovals ATEX cat. 3GD, IECEx Without Analogue feedback Y e s No 1.) Only available for Type 8694. Not available for Type 8696. 2.) Based on CANopen

Positioner / process controller TopControl and SideControl Remote for control valves of the ELEMENT series 2 | 2Visit this product area on the website  © Christian Bürkert GmbH & Co. KG, subject to change Positioner / process controller SideControl Remote for control valves of the ELEMENT series For actuator size ø70/ø90/ø130 mm P rocess Controller SideControl Type 8793 with Remot e sensor Type 8798 P ositioner SideControl Type 8792 with Remot e sensor Type 8798

  • Intelligent digital positioners and process contr ollers with integrated PID controller
  • Lighted graphic display with membrane k eypad
  • T une-function for automatic start-up, linearization and optimization of process characteristics
  • Field bus communication
  • Diagnostic functions
  • Digital positioner without sensor input
  • Lighted graphic display with membrane k eypad
  • Tune function for automatic start-up
  • Field bus communication
  • Diagnostic functions Pneumatic function Single-acting Single- and double-acting Electrical connection C able gland1.) M12 Multipole connection Digital communication PROFIBUS DP-V1 DeviceNet EtherNet/IP PROFINET Bürkert Systembus (büS)2.) Modbus TCP Without Approvals ATEX cat. 3GD, IECEx Without Analogue feedback 0/4…20 mA 0/4…20 mA binary outputs 0/5…10 V 0/5…20 V binary outputs Digital outputs and diagnostics Y e s No 1.) With a cable gland the selection of a fieldbus communication PROFIBUS, EtherNet etc. is not possible. Only variants with M12 Multipole are offered as standard for fieldbus communication. 2.) Based on CANopen For actuator size ø70/ø90/ø130 mm P ositioner SideControl BASIC Type 8791 with Remot e sensor Type 8798 P ositioner SideControl BASIC IP20 Type 8791 with Remot e sensor Type 8798
  • „simple positioner“
  • Universal positioning system for single and double acting actuat ors
  • Tune function for automatic start-up
  • Field bus communication
  • „simple positioner“
  • Universal positioning system for single and double acting actuat ors
  • Tune function for automatic start-up
  • Switchgear cabinet assembly Pneumatic function Single-acting (actuator size Ø70/90) Single- and double-acting (actuator size Ø130) Electrical connection C able gland1.) M12 Multipole connection Digital communication AS-Interface2.): Analogue profile S-7.3.4 (only set point) Analogue profile S-7.A.5 (set point and feedback) IO-Link Bürkert Systembus (büS)3.) Without Approvals ATEX cat. 3GD, IECEx2.) Without Analogue feedback 0/4…20 mA No 1.) With a cable gland, the selection of a fieldbus communication AS-Interface is not possible. For fieldbus communication, only variants with M12 Multipole are offered as standar 2.) Only available for Positioner SideControl BASIC Type 8791. Not available for Positioner SideControl BASIC IP20 Type 8791. 3.) Based on CANopen, IO-Link and büS not available for IP20 Type 8791