2719470 PHOENIX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
PHOENIX CONTACT Inc., USA Page 1 / 4 http://www.phoenixcon.com Feb 7, 2011 Extract from the online catalog IBS CT 24 IO GT-T Order No.: 2719470 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2719470 Coupling module (gateway), I/O coupling module for two INTERBUS systems, 24 V DC, IP20 protection, with MINI-COMBICON remote bus connection Commercial data GTIN (EAN) 4 017918 126940 sales group K030 Pack 1 pcs. Customs tariff 85389091 Catalog page information Page 124 (AX-2005) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Product description INTERBUS CT coupling module (gateway) for two INTERBUS systems INTERBUS CT coupling modules connect two INTERBUS systems together on the input/output level. In their function, they correspond to two normal I/O modules, the inputs and outputs of which are connected crosswise. In this way, INTERBUS can be used to facilitate bi-directional data transfer between any two control systems. The extent of the data can be up to ten words (160 bits) per cycle. The data width can be configured between one byte and ten words by means of a rotary switch (byte configuration is only possible in Generation 4 controller boards). The selected data word (or byte) is shown on a 7-segment display. The modules are installed directly in the INTERBUS remote bus. In the IBS CT 24 IO GT-T module, the bus is connected via plug-in MINI-COMBICON terminals. The IBS CT 24 IO GT-LK fiber optic module has F-SMA plug connectors. The modules are equipped with electrically isolated bus lines as well as a redundant supply of the 24 V power. Sixteen status LEDs assigned to each bus line are used to display the signal states.
IBS CT 24 IO GT-T Order No.: 2719470 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2719470 PHOENIX CONTACT Inc., USA Page 2 / 4 http://www.phoenixcon.com Feb 7, 2011 A button located on the module permits the current output word or byte of the specific remote bus to be displayed. In this case, the output information for one bus is the input information of the other. Technical data Interfaces Interface INTERBUS remote bus (incoming/outgoing) Type of connection 10-pos. MINI-COMBICON connector Transmission speed 500 kBit/s Power supply Typical current consumption 240 mA Supply voltage 24 V DC Supply voltage range 19.2 V ... 30 V Electrical isolation Test section Supply voltage/logics 500 V AC 50 Hz 1 min Supply voltage/functional earth ground 500 V AC 50 Hz 1 min Logics/functional earth ground 500 V AC 50 Hz 1 min INTERBUS system 1/INTERBUS system 2 500 V AC 50 Hz 1 min INTERBUS data Maximum distance to the next remote bus device 400 m General data Width 204 mm Height 77 mm Depth 37 mm Weight 240 g Degree of protection IP20 Ambient temperature (operation) -20 °C ... 70 °C Certificates / Approvals Certification GOST
IBS CT 24 IO GT-T Order No.: 2719470 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2719470 PHOENIX CONTACT Inc., USA Page 3 / 4 http://www.phoenixcon.com Feb 7, 2011 Accessories Item Designation Description Assembly
2722742 IBS RB-SHIELD Replacement shield point, for INTERBUS-ST bus terminal block
BKM-... Plug/Adapter
2722768 IBS RB PLSET/FRONT-MC
1,5/10 Replacement remote bus connector set Diagrams/Drawings Dimensioned drawing FAQs
- When does an alteration to the setting of the process data length become valid? The new value set in the coupling module for the process data length is not adopted until the supply voltage for the module has been switched off once. To adopt the new setting, disconnect the module briefly from the supply voltage. Make sure that the altered process data length is also entered in the configuration in the controller board. Do not use the S2 key to acknowledge disconnection of the module, as otherwise an internal test function is started. It is only possible to quit the test mode by switching off the supply voltage.
IBS CT 24 IO GT-T Order No.: 2719470 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2719470 PHOENIX CONTACT Inc., USA Page 4 / 4 http://www.phoenixcon.com Feb 7, 2011 Address PHOENIX CONTACT Inc., USA
586 Fulling Mill Road
Middletown, PA 17057,USA Phone (800) 888-7388 Fax (717) 944-1625 http://www.phoenixcon.com © 2011 Phoenix Contact Technical modifications reserved;