DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
https://www.phoenixcontact.com/us/products/2714048 12/4/13 Page 1 / 13 Installation level terminal block - PIK 4-L - 2714048 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Installation level terminal block, Screw connection, Cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, Width: 6.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15 Product Features The other types in the PIK range support all other circuit versions encountered in practice For example, combining the PIK 4-PE/L/NT and the PIK 4-L/L enables a three-phase circuit to be wired on a design width of 12.4 mm. This represents a space saving of 18.6 mm compared to conventional wiring with single-level installation terminal blocks. Key commercial data Packing unit 1 PCE GTIN Weight per Piece (excluding packing) 14.83 GRM Custom tariff number 85369010 Country of origin Greece Technical data General Number of levels 2 Number of connections 4 Color gray Insulating material PA Inflammability class according to UL 94 V2 Maximum load current 32 A (with 4 mm² conductor cross section) Rated surge voltage 6 kV Pollution degree 3 Surge voltage category III
https://www.phoenixcontact.com/us/products/2714048 12/4/13 Page 2 / 13 Installation level terminal block - PIK 4-L - 2714048 Technical data General Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 32 A Nominal voltage UN 400 V Open side panel ja Dimensions Width 6.2 mm Length 88 mm Height NS 35/7,5 51.5 mm Height NS 35/15 59 mm Connection data Note Terminal point Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 4 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 12 Conductor cross section stranded, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 4 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max. 0.5 mm² Connection method Screw connection Stripping length 9 mm Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm
https://www.phoenixcontact.com/us/products/2714048 12/4/13 Page 3 / 13 Installation level terminal block - PIK 4-L - 2714048 Classifications eCl@ss eCl@ss 4.0 27141118 eCl@ss 4.1 27141118 eCl@ss 5.0 27141118 eCl@ss 5.1 27141118 eCl@ss 6.0 27141125 eCl@ss 7.0 27141125 eCl@ss 8.0 27141125 ETIM ETIM 2.0 EC001329 ETIM 3.0 EC001329 ETIM 4.0 EC001329 ETIM 5.0 EC001329 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / cUL Recognized / GOST / DNV / GOST / cULus Recognized Ex Approvals Approvals submitted Approval details
https://www.phoenixcontact.com/us/products/2714048 12/4/13 Page 4 / 13 Installation level terminal block - PIK 4-L - 2714048 Approvals UL Recognized B C mm²/AWG/kcmil 28-12 28-12 Nominal current IN 20 A 20 A Nominal voltage UN 250 V 300 V cUL Recognized B C mm²/AWG/kcmil 28-12 28-12 Nominal current IN 20 A 20 A Nominal voltage UN 250 V 300 V GOST DNV GOST cULus Recognized Accessories Accessories Bridge
https://www.phoenixcontact.com/us/products/2714048 12/4/13 Page 5 / 13 Installation level terminal block - PIK 4-L - 2714048 Accessories Fixed bridge - FBI 100- 6 - 0201650 Fixed bridge, Number of positions: 100, Color: silver Fixed bridge - FBI 10- 6 - 0203250 Fixed bridge, Number of positions: 10, Color: silver Fixed bridge - FBI 20- 6 - 0201867 Fixed bridge, Number of positions: 20, Color: silver End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
https://www.phoenixcontact.com/us/products/2714048 12/4/13 Page 6 / 13 Installation level terminal block - PIK 4-L - 2714048 Accessories End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray End clamp - E/UK - 1201442 End clamp, for assembly on NS 32 or NS 35/7.5 DIN rail End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray End cover End cover - D-PIK 4 - 2714080 End cover, Length: 88 mm, Width: 1.5 mm, Color: gray Insulating sleeve Bridge bar isolator - IS-K 4 - 1302338 Bridge bar isolator, Color: gray
https://www.phoenixcontact.com/us/products/2714048 12/4/13 Page 7 / 13 Installation level terminal block - PIK 4-L - 2714048 Accessories Bridge bar isolator - ISSBI 10- 6 - 0301505 Bridge bar isolator, Number of positions: 10, Color: silver Labeled terminal marker Zack marker strip - ZB 6 CUS - 0824992 Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm Marker for terminal blocks - UC-TM 6 CUS - 0824589 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm Marker for terminal blocks - UCT-TM 6 CUS - 0829602 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm Marker pen
https://www.phoenixcontact.com/us/products/2714048 12/4/13 Page 8 / 13 Installation level terminal block - PIK 4-L - 2714048 Accessories Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm Mounting rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail 35 mm (NS 35) DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail 35 mm (NS 35)
https://www.phoenixcontact.com/us/products/2714048 12/4/13 Page 9 / 13 Installation level terminal block - PIK 4-L - 2714048 Accessories DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5
https://www.phoenixcontact.com/us/products/2714048 12/4/13 Page 10 / 13 Installation level terminal block - PIK 4-L - 2714048 Accessories DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm DIN rail - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m DIN rail - NS 35/15 WH PERF 2000MM - 0806602 DIN rail 35 mm (NS 35) DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail 35 mm (NS 35) DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm
https://www.phoenixcontact.com/us/products/2714048 12/4/13 Page 11 / 13 Installation level terminal block - PIK 4-L - 2714048 Accessories DIN rail - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m DIN rail - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m DIN rail - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15 DIN rail - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m Partition plate
https://www.phoenixcontact.com/us/products/2714048 12/4/13 Page 12 / 13 Installation level terminal block - PIK 4-L - 2714048 Accessories Partition plate - ATP-PIK - 2714145 Partition plate, Length: 95 mm, Width: 1.5 mm, Height: 57 mm, Color: gray Terminal marking Marker cards - SBS 6:UNBEDRUCKT - 1007222 Marker cards, Card, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, Snap into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 6 x 6.1 mm Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm Marker for terminal blocks - UCT-TM 6 - 0828736 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
https://www.phoenixcontact.com/us/products/2714048 12/4/13 Page 13 / 13 Installation level terminal block - PIK 4-L - 2714048 Drawings Circuit diagram © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com