2708232 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

https://www.phoenixcontact.com/us/products/2708232

28.10.2013 Page 1 / 6

D-SUB bus connector - SUBCON-PLUS-PROFIB/SC2 - 2708232 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) D-SUB connector, 9-pos., male connector, cable entry < 35°, bus system: PROFIBUS DP up to 12 Mbps, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; screw connection terminal blocks Key commercial data Packing unit 1 1 Weight per Piece (excluding packing) 40.0 GRM Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Max. cable diameter 8.4 mm Min. cable diameter 7.6 mm Width 16.6 mm Height 39.4 mm Length 58 mm Ambient conditions Ambient temperature (operation) -20 °C ... 75 °C Ambient temperature (storage/transport) -25 °C ... 80 °C Altitude 5000 m (For restrictions see manufacturer's declaration) General Nominal voltage UN 50 V Nominal current IN 100 mA Bus system PROFIBUS DP Signal PROFIBUS Insertion/withdrawal cycles > 200

https://www.phoenixcontact.com/us/products/2708232

28.10.2013 Page 2 / 6

D-SUB bus connector - SUBCON-PLUS-PROFIB/SC2 - 2708232 Technical data General SUBCON fixing screws 4-40 UNC Tightening torque 0.4 Nm Housing material ABS, metal-plated Pin assignment 3, 5, 6, 8 Connection data Connection D-SUB connection Number of positions 9 Connection method D-SUB connector Termination resistor 390 Ω 220 Ω 390 Ω (Can be connected externally) Connection PCB connection Connection method Screw connection Conductor cross section stranded min. 0.14 mm² Conductor cross section stranded max. 1 mm² Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Min. AWG conductor cross section, stranded 26 Max. AWG conductor cross section, stranded 18 Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 16 Stripping length 5 mm Tightening torque 0.4 Nm Classifications eCl@ss eCl@ss 4.0 27140816 eCl@ss 4.1 27140816 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440209 ETIM ETIM 2.0 EC001132

https://www.phoenixcontact.com/us/products/2708232

28.10.2013 Page 3 / 6

D-SUB bus connector - SUBCON-PLUS-PROFIB/SC2 - 2708232 Classifications ETIM ETIM 3.0 EC001132 ETIM 4.0 EC001132 ETIM 5.0 EC001132 UNSPSC UNSPSC 6.01 30211802 UNSPSC 7.0901 39121402 UNSPSC 11 39121402 UNSPSC 12.01 39121402 UNSPSC 13.2 39121402 Approvals Approvals Approvals UL Recognized / cUL Recognized / CSA / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized cUL Recognized CSA

https://www.phoenixcontact.com/us/products/2708232

28.10.2013 Page 4 / 6

D-SUB bus connector - SUBCON-PLUS-PROFIB/SC2 - 2708232 Approvals cULus Recognized Accessories Accessories Data cable by the meter Cable - PSM-CABLE-PROFIB/FC - 2744652 PROFIBUS cable, Fast Connect type, up to 12 Mbps (02YSY (ST)CY 1x2x22 AWG) Data plug D-SUB bus connector - SUBCON-PLUS-PROFIB/PG/SC2 - 2708245 D-SUB connector, 9-pos., male connector, cable entry < 35°, bus system: PROFIBUS DP up to 12 Mbps with PG D-SUB socket for connecting a programming device, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; screw connection terminal blocks D-SUB bus connector - SUBCON-PLUS-PROFIB/90/PG/IDC - 2313685 D-SUB connector, 9-pos., male connector, cable entry < 90°, bus system: PROFIBUS DP up to 12 Mbps with PG D-SUB socket for connecting a programming device, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; IDC terminal block connection D-SUB bus connector - SUBCON-PLUS-PROFIB/AX/SC - 2744380 D-SUB connector, 9-pos., male connector, axial version with two cable entries, bus system: PROFIBUS DP up to 12 Mbps, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; screw connection terminal blocks

https://www.phoenixcontact.com/us/products/2708232

28.10.2013 Page 5 / 6

D-SUB bus connector - SUBCON-PLUS-PROFIB/SC2 - 2708232 Accessories Screwdriver tools Screwdriver - SZF 0-0,4X2,5 - 1204504 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.4 x 2.5 x 75 mm, 2- component grip, with non-slip grip Screwdriver - SZK PH1 VDE - 1205150 Screwdriver, PH crosshead, VDE insulated, size: PH 1 x 80 mm, 2-component grip, with non-slip grip Stripping tool Stripping pliers - QUICK WIREFOX 6 - 1204384 Stripping tool for cables with PVC insulation, stripping range: 0.08 to 6 mm², wire cutting up to 6 mm² flexible or 4 mm² rigid Stripping tool - PSM-STRIP-FC/PROFIB - 2744623 Quick stripping tool for PROFIBUS cable, type Fast Connect Drawings

https://www.phoenixcontact.com/us/products/2708232

28.10.2013 Page 6 / 6

D-SUB bus connector - SUBCON-PLUS-PROFIB/SC2 - 2708232 Dimensioned drawing 16,635,5 39,4

58 Circuit diagram

5 GND

3 D(P)

8 D(N)

Ω 220Ω 390Ω Functional diagram of the connector range SUBCON-PLUS-PROFIB/... © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com