2702253

2702253 PHOENIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

https://www.phoenixcontact.com/pi/products/2702253 09/06/2018 Page 1 / 6 Modem - TC EXTENDER 4001 ETH-1S - 2702253 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Managed Ethernet extender, point-to-point connections, data rates up to 15.3 Mbps, distances of up to 20 km on in-house copper cables, replaceable surge protection, 1 SHDSL port, 1 LAN port, diagnostics via Ethernet Why buy this product Distances up to 20 km Up to 15.3 Mbps in 2-wire operation Robust modulation method (SHDSL) Automatic SHDSL data rate detection Network transparent (no IP configuration required) Automatic network data rate detection (10/100 Mbps) Easy startup, plug and play Alarm and signal output Remote diagnostics via IP and automatic event messages via SNMP Key Commercial Data Packing unit 1 STK GTIN GTIN 4055626055558 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 60 mm Height 130 mm Depth 160 mm Ambient conditions

https://www.phoenixcontact.com/pi/products/2702253 09/06/2018 Page 2 / 6 Modem - TC EXTENDER 4001 ETH-1S - 2702253 Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing) Altitude 2500 m (For restrictions see manufacturer's declaration) Degree of protection IP20 General Electrical isolation VCC // Ethernet // DSL (A/B) // FE Test voltage data interface/power supply 1.5 kV AC (50 Hz, 1 min.) Standards/regulations EN 50121-4 Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Net weight 258.7 g Housing material Aluminum / steel sheet DC01 MTTF 577 Years (SN 29500 standard, temperature 25 °C, operating cycle 21 % (5 days a week, 8 hours a day))

300 Years (SN 29500 standard, temperature 40 °C, operating cycle

34.25 % (5 days a week, 12 hours a day))

128 Years (SN 29500 standard, temperature 40 °C, operating cycle 100

% (7 days a week, 24 hours a day)) Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X (Please follow the special installation instructions in the documentation!) UL, USA/Canada 508 Listed Power supply Nominal supply voltage 24 V DC ±5 % Supply voltage range 10 V DC ... 60 V DC Typical current consumption 80 mA (60 V DC) 200 mA (24 V DC) 380 mA (10 V DC) Connection method Push-in spring connection Serial interface Interface 1 Ethernet interface, 10/100Base-T(X) in acc. with IEEE 802.3u Interface Ethernet No. of ports 1 Connection method RJ45 socket 1 port 10/100Base-T(X), auto negotiation Transmission length < 100 m (shielded twisted pair) Protocols supported IPv4, IPv6, TCP/IP, HTTP, HTTPS Auxiliary protocols ARP, DHCP (Client), PING, SNMP Serial transmission speed 10/100 Mbps, auto negotiation Interface 2 SHDSL interface according to ITU-T G.991.2.bis

https://www.phoenixcontact.com/pi/products/2702253 09/06/2018 Page 3 / 6 Modem - TC EXTENDER 4001 ETH-1S - 2702253 Technical data Serial interface No. of ports 1 (2-wire operation) Connection method Push-in spring connection Transmission length < 20 km (Depending on data rate and cable cross section) Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Serial transmission speed 2-wire operation: 32 kbps ... 15.3 Mbps Function Web-based management yes Management Web-based management: Diagnostics, log book, customized configuration Status and diagnostic indicators LEDs for warning, status, and device information Digital outputs Output name Digital output Number of outputs 1 Voltage output signal depending on the operating voltage Current output signal ≤ 500 mA (Short-circuit-proof) Connection method Push-in spring connection Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Type of test Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 Test result 5g, 10...150 Hz, 2.5 h, in XYZ direction Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27 Test result 15g Standards/regulations EN 61000-4-2 Contact discharge ± 6 kV Indirect discharge ± 6 kV Standards/regulations EN 61000-4-3 Frequency range 80 MHz ... 3 GHz Standards/regulations EN 61000-4-4 Comments Criterion B Standards/regulations EN 61000-4-5 Signal ± 1 kV (asymmetrical, shielded Ethernet cable) ± 4 kV (asymmetrical: line to ground, unshielded SHDSL cable) ± 2 kV (symmetrical: line to line, unshielded SHDSL cable) Standards/regulations EN 55011 EN 61000-4-6

https://www.phoenixcontact.com/pi/products/2702253 09/06/2018 Page 4 / 6 Modem - TC EXTENDER 4001 ETH-1S - 2702253 Technical data Standards and Regulations Frequency range 0.15 MHz ... 80 MHz Standards/regulations EN 50121-4 Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA/Canada 508 Listed Noxious gas test ISA-S71.04-1985 G3 Harsh Group A Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Schematic diagram Front view Schematic diagram Replacement of protective module Schematic diagram Reset button Schematic diagram Assembly/removal

https://www.phoenixcontact.com/pi/products/2702253 09/06/2018 Page 5 / 6 Modem - TC EXTENDER 4001 ETH-1S - 2702253 Schematic diagram US Surge DSL Reset SD Card A B DSL LAN GND GND DO1 GND GND US1 US2 TC EXTENDER 4001 ETH-1S Documentation i Power supply Schematic diagram US Surge DSL Reset SD Card A B DSL LAN GND GND DO1 GND GND US1 US2 TC EXTENDER 4001 ETH-1S Documentation i Digital switching output Connection diagram DSL A / Client A(a) A(b) DSL B / Server B(a) B(b) DSL A / Client A(a) A(b) DSL B / Server B(a) B(b) DSL connection Circuit diagram DO1 GND DO2 GND DO US1 GND US2 GNDPOWER SD-SLOT SWITCH µC SHDSL A v B A v B

24 V DC

5 V DC

5...8 NC GNRJ 45 LAN 1 INFO RESET A v B DSL RD RD RD GN GN GN US DSL Surge Protection

https://www.phoenixcontact.com/pi/products/2702253 09/06/2018 Page 6 / 6 Modem - TC EXTENDER 4001 ETH-1S - 2702253 Approvals Approvals Approvals UL Listed / cUL Listed / cULus Listed Ex Approvals ATEX Approval details UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cULus Listed Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8

32825 Blomberg

Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com