2700608 PHOENIX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
https://www.phoenixcontact.com/pi/products/2700608 10/16/2018 Page 1 / 6 I/O module - AXL F DOR4/2 AC/220DC 1F - 2700608 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Axioline F, Relay module, Relay output: 4 (floating contacts), 220 V DC / 230 V AC, 8 A, connection method: 2-wire, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors Product Description The module is designed for use within an Axioline F station. It has four floating relay N/O contacts which are independent of one another. Low-voltage and extra-low-voltage modules can be used side by side within an Axioline F station. Your advantages Meets the requirements of IEC 61850-3 and IEEE 1613 4 monostable relays Floating connections for 4 actuators Nominal current of each output: 8 A Total current of the module: 32 A (4 x 8 A) Device rating plate stored Diagnostic and status indicators Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356916486 Technical data Dimensions Width 53.6 mm Height 126.1 mm Depth 54 mm Note on dimensions The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715). Ambient conditions
https://www.phoenixcontact.com/pi/products/2700608 10/16/2018 Page 2 / 6 I/O module - AXL F DOR4/2 AC/220DC 1F - 2700608 Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 60 °C (max. 6 A/channel for wall mounting on horizontal DIN rail; max. 4 A/channel for any mounting position) -25 °C ... 50 °C (max. 8 A/channel for wall mounting on horizontal DIN rail; max. 6 A/channel for any mounting position) -25 °C ... 40 °C (max. 8 A/channel for any mounting position) Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 Connection data Designation Axioline F connector Connection method Push-in connection Note on the connection method Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. When selecting the cables, please note that in the case of a small conductor cross section and high current, the terminal point temperature may be up to 30 K above the ambient temperature. Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Stripping length 8 mm General Mounting type DIN rail Net weight 222 g Note on weight specifications with connectors and bus base module Degree of pollution 2 Interfaces Designation Axioline F local bus No. of channels 2 Connection method Bus base module Transmission speed 100 Mbps Axioline potentials Designation Axioline F local bus supply (UBus) Supply voltage 5 V DC (via bus base module) Current consumption max. 280 mA (all relays pick up) Power consumption max. 1.4 W (all relays pick up)
https://www.phoenixcontact.com/pi/products/2700608 10/16/2018 Page 3 / 6 I/O module - AXL F DOR4/2 AC/220DC 1F - 2700608 Technical data Digital outputs Output name Relay output Output description Relay N/O contact Connection method Push-in connection Connection technology 2-wire Number of outputs 4 (floating contacts) Nominal output voltage 220 V DC Output current max. 8 A (per channel, provide an external fuse) max. 32 A (per module) Maximum output current per channel 8 A Relay outputs Switching current max. 8 A AC (cos phi = 1) For DC see load limit curve, e.g., the following values: max. 8 A DC (≤ 30 V, ohmic load) max. 500 mA DC (≤ 110 V, ohmic load) max. 250 mA DC (220 V DC, ohmic load) max. 220 mA DC (125 V DC, L/R ≤ 50 ms, applications with UL approval) max. 110 mA DC (250 V DC, L/R ≤ 50 ms, applications with UL approval) Switching capacity max. 2000 VA For DC see load limit curve, e.g., the following values: max. 240 W (30 V DC) max. 55 W (≥ 60 V DC) max. 25 W (125 V DC, 250 V DC, applications with UL approval) Contact type 4 floating N/O contacts Switching current max. 8 A AC (cos phi = 1) For DC see load limit curve, e.g., the following values: max. 8 A DC (≤ 30 V, ohmic load) max. 500 mA DC (≤ 110 V, ohmic load) max. 250 mA DC (220 V DC, ohmic load) max. 220 mA DC (125 V DC, L/R ≤ 50 ms, applications with UL approval) max. 110 mA DC (250 V DC, L/R ≤ 50 ms, applications with UL approval) Switching capacity max. 2000 VA Switching frequency max. 6 (per minute) Release time < 5 ms Mechanical service life 10x 10 cycles Electrical isolation Test section Relay contact / logic 4 kV Rated surge voltage (safe isolation according to EN 61010-2-201/IEC 61010-2-201)
https://www.phoenixcontact.com/pi/products/2700608 10/16/2018 Page 4 / 6 I/O module - AXL F DOR4/2 AC/220DC 1F - 2700608 Technical data Electrical isolation Relay contact / logic 5 kV Pulse test voltage according to EN 61850/IEC 61850 Contact / functional earth ground 4 kV Rated surge voltage (safe isolation according to EN 61010-2-201/IEC 61010-2-201) Contact / functional earth ground 5 kV Pulse test voltage according to EN 61850/IEC 61850 Contact / contact (open contact) 1 kV 50 Hz 1 min. Contact / contact (adjacent connectors 2.5 kV Pulse test voltage according to EN 61850/IEC 61850 Standards and Regulations Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g Shock in acc. with EN 60068-2-27/IEC 60068-2-27 20g (contact interruption) / 5g (contact closure) Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g Developed according to standard IEC 61850-3 Electrostatic discharge (ESD) EN 61000-4-2/ IEC 61000-4-2 Criterion A, 6 kV contact discharge, 8 kV air discharge IEC 61850-3 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, 20 V/m up to 1 GHz, 10 V/m up to 3 GHz IEC 61850-3 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion A, 4 kV IEC 61850-3 Transient overvoltage (surge) EN 61000-4-5/ IEC 61000-4-5 Criterion A, ±4 kV (asymmetrical) IEC 61850-3 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A; Test voltage 10 V IEC 61850-3 Immunity to magnetic fields, EN 61000-4-8/IEC 61000-4-8
300 A/m continuous, 1000 A/m for 1 s
IEC 61850-3 Immunity to attenuated oscillating magnetic fields, EN 61000-4-10/IEC 61000-4-10 100 A/m IEC 61850-3 Immunity to conducted common-mode interference, EN 61000-4-16/IEC 61000-4-16 30 V continuous, 300 V for 1 s IEC 61850-3 Attenuated oscillating waves, EN 61000-4-18/ IEC 61000-4-18 2.5 kV asymmetrical IEC 61850-3 Radio interference properties EN 55022 Class B Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings
https://www.phoenixcontact.com/pi/products/2700608 10/16/2018 Page 5 / 6 I/O module - AXL F DOR4/2 AC/220DC 1F - 2700608 Connection diagram 00 01 02 03 10 11 12 13 20 21 22 23 30 31 32 33
230 V AC /
220 V DC
I [A]DC U [V] DC 0,1 1 10 1 0 0 1000 DC load limit curve for REL-MLR-1X1/G 5 (1 - ohmic load, 2 - inductive load L/R = 50 ms) Dimensional drawing 53,6 54 122,4 126,1 Block diagram C DO 1...4 UBus Local bus Internal wiring of the terminal points Approvals Approvals Approvals UL Listed / cUL Listed / cULus Listed Ex Approvals Approval details
https://www.phoenixcontact.com/pi/products/2700608 10/16/2018 Page 6 / 6 I/O module - AXL F DOR4/2 AC/220DC 1F - 2700608 Approvals UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cULus Listed Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8
32825 Blomberg
Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com