2700173

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

Features

– 8 digital inputs – Connection of sensors in single-wire technology – Diagnostic and status indicators This data sheet is only valid in association with the IL SYS INST UM E user manual. Make sure you always use the latest documentation. It can be downloaded from the product at phoenixcontact.net/products. 7984_en_03 2016-11-15

7984_en_03 PHOENIX CONTACT 2 / 10 2T a b l e o f c o n t e n t s

7984_en_03 PHOENIX CONTACT 3 / 10 Description Ty pe Order No. Pcs./Pkt. Inline, Digital input terminal, Digital inputs: 8, 24 V DC, Connection method: 1-wire, Transmission speed in the local bus 500 kbps, Degree of protection IP20, including Inline connector and labeling field IB IL 24 DI8/HD-PAC 2700173 1 3O r d e r i n g d a t a Accessories Ty pe Order No. Pcs./Pkt. Connector, for digital 1, 2 or 8-channel Inline terminals (Connector/Adapter) IB IL SCN-8 2726337 10 Labeling field, width: 12.2 mm (Marking) IB IL FIELD 2 2727501 10 Inline terminal for power distribution (24 V), complete with accessories, (connector and labeling field) 24 V supply voltage is fed out from the segment circuit (US) IB IL PD 24V-PAC 2862987 1 Inline terminal for power distribution (GND), complete with accessories, (connector and labeling field) connections for GND IB IL PD GND-PAC 2862990 1 VARIOFACE front adapter for Inline HD modules, for transferring 8 digital signals. (Connector/Adapter) FLKM 14-PA-INLINE/DIO8 2900889 1 Documentation Ty pe Order No. Pcs./Pkt. User manual, English, Automation terminals of the Inline product range IL SYS INST UM E - - Data sheet, English, INTERBUS addressing DB GB IBS SYS ADDRESS - - Dimensions (nominal sizes in mm) Width 12.2 mm Height 119.8 mm Depth 71.5 mm

4 Technical data

140,5 119,8 71,5

7984_en_03 PHOENIX CONTACT 4 / 10 General data Color green Weight 60 g (with connector) Operating mode Process data mode with one byte Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2) Permissible humidity (storage/transport) 1 0 % ... 95 % (according to DIN EN 61131-2) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 Protection class III, IEC 61140, EN 61140, VDE 0140-1 Connection data Designation Inline connector Connection method Spring-cage connection Conductor cross section [AWG] 28 ... 16 Stripping length 8 mm Connection data for UL approvals Designation Inline connector Connection method Spring-cage connection Conductor cross section [AWG] 24 ... 16 Interface Inline local bus Connection method Inline data jumper Transmission speed 500 kbps Power consumption Segment circuit supply U S 24 V DC (nominal value) Current consumption from US max. 5.5 mA DC Communications power UL 7.5 V DC (via voltage jumper) Current consumption from UL max. 30 mA DC Power consumption max. 0.25 W (at U L) Digital inputs Number of inputs 8 Connection method Spring-cage connection Connection method 1-wire Description of the input EN 61131-2 types 1 and 3 Nominal input voltage 24 V DC Nominal input current typ. 2.4 mA Input voltage range "0" signal -3 V DC ... 5 V DC

7984_en_03 PHOENIX CONTACT 5 / 10 Input voltage range "1" signal 11 V DC ... 30 V DC Delay at signal change from 0 to 1 typ. 1 ms Delay at signal change from 1 to 0 typ. 1 ms Permissible conductor length to the sensor 30 m Digital inputs Programming data (INTERBUS, local bus) ID code (hex) BE ID code (dec.) 190 Length code (hex) 81 Length code (dec.) 129 Process data channel 8 Bit Input address area 1 Byte Output address area 0 Byte Parameter channel (PCP) 0 Byte Register length (bus) 8 Bit For the programming data/configuration data of other bus systems, please refer to the corresponding electronic device data sheet (e.g., GSD, EDS). Configuration and parameter data in a PROFIBUS system Required parameter data 1 Byte Need for configuration data 4 Byte Error messages to the higher level control or computer system None Electrical isolation/isolation of the voltage areas Test section Tes t volta ge 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC, 50 Hz, 1 min. 7.5 V supply (bus logics) / functional earth ground 500 V AC, 50 Hz, 1 min. 24 V supply (I/O) / functional earth ground 500 V AC, 50 Hz, 1 min. To achieve electrical isolation between the logic level and the I/O area, supply these areas from separate power supply units. Interconnection of the power supply units in the 24 V area is not permitted (see IL SYS INST UM E user manual). Approvals For the latest approvals, please visit phoenixcontact.net/products.

7984_en_03 PHOENIX CONTACT 6 / 10

5 Additional tables

Input characteristic curve Input voltage U [V] Typical input current I [mA] -30 < U ≤ 0.7 0 3 0.12 61 . 3 2 9 2.32 12 2.36 15 2.36 18 2.36 21 2.36 24 2.40 27 2.40 30 2.40

7984_en_03 PHOENIX CONTACT 7 / 10

6 Internal circuit diagram

Figure 1 Internal wiring of the terminal points Key:

7 Terminal point assignment

Figure 2 Terminal point assignment Protocol chip (Bus logic including voltage conditioning) LED (status indicator) Optocoupler Digital input Electrically isolated area Explanation for other used symbols has been provided in the IL SYS INST UM E user manual. Local bus 88 16 +24V (U )M +24V (U )S 4x 4x OPC UL+ UANA UL- OPC Terminal point Assignment 1.1 / 2.1 Signal input (IN01 / IN02) 1.2 / 2.2 Signal input (IN03 / IN04) 1.3 / 2.3 Signal input (IN05 / IN06) 1.4 / 2.4 Signal input (IN07 / IN08) 1.1 2.1 1.2 2.2 1.3 2.3 1.4 2.4 1.1 1.2 1.3 1.4 2.1 2.3 2.4 2.2

7984_en_03 PHOENIX CONTACT 8 / 10

8 Connection notes and examples

The simplest way to meet this requirement is to use the IB IL PD 24V-PAC terminal. Wire the 24 V sensor connections to this terminal. In this way, they are supplied from the potential jumper US of the Inline station. Figure 3 Typical connection of sensors when terminals for potential distribution are used The sensors can also be connected via external busbars. Ensure that the sensors and US are supplied from the same voltage supply. Figure 4 Example of a connection of sensors when using external busbars When connecting the sensors observe the assignment of the terminal points to the process data. NOTE: Malfunction The supply voltage US is used internally as the auxiliary supply. If it is not present, the terminal will not operate properly. Make sure that the supply voltage US is available. NOTE: Malfunction The sensors and US must be supplied from the same voltage supply. D 1.1 2.1 1.2 2.2 1.3 2.3 1.4 2.4 PD 24V US 1.1 2.1 1.2 2.2 1.3 2.3 1.4 2.4 PD GND 1.1 2.1 1.2 2.2 1.3 2.3 1.4 2.4 IN7 24V IN8 24V IN2 24V In1 24V IB IL PD 24V-PAC IB IL 24 DI8/HD-PAC IB IL PD GND-PAC 1.1 2.1 1.2 1.3 1.4 2.2 2.3 2.4 IN8 +24 V IN7 +24 V IN1 +24 V IN2 +24 V +24 V

7984_en_03 PHOENIX CONTACT 9 / 10

9 Application examples

Figure 5 Connection of sensors when using the IB IL PD 24V-PAC terminal Figure 6 Connection of sensors when using external busbars 1.2 2.2 1.3 2.3 1.4 2.4 1.1 2.1 PD 24V US 1.2 2.2 1.3 2.3 1.4 2.4 1.1 2.1 D 1.2 2.2 1.3 2.3 1.4 2.4 1.1 2.1 US UM 1.2 2.2 1.3 2.3 1.4 2.4 1.1 2.1 UL 1.2 2.2 1.3 2.3 1.4 2.4 1.1 2.1 RD LD 1.2 2.2 1.3 2.3 1.4 2.4 1.1 2.1 BA RC BK-T/U 2 4VD C (UBK) 2 4VD C (U /UMS ) + - IBS IL 24 BK-T/U-PAC IB IL PD 24V-PAC IB IL 24 DI 8/HD-PAC 1.2 2.2 1.3 2.3 1.4 2.4 1.1 2.1 RD LD 1.2 2.2 1.3 2.3 1.4 2.4 1.1 2.1 UL 1.2 2.2 1.3 2.3 1.4 2.4 1.1 2.1 US UM 1.2 2.2 1.3 2.3 1.4 2.4 1.1 2.1 D 1.2 2.2 1.3 2.3 1.4 2.4 1.1 2.1 BA RC BK-T/U 2 4VD C (UBK) 2 4VD C (U /UMS ) + -

7984_en_03 10 / 10PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany phoenixcontact.com

10 Local diagnostic and status indicators

Figure 7 Local diagnostic and status indicators Function identification Light blue

2 Mbps: White stripe in the vicinity of the D LED

11 Process data

Assignment of the terminal points to IN process data Designati on Color Meaning D Green Diagnostics (bus and logic voltage) 1 ... 8 Yellow Status of the inputs 1 2 3 4 5 6 7 8 D (Byte.Bit) view Byte Byte 0 Bit 7 6 5 4 3 2 1 0 Assignment Signal IN08 IN07 IN06 IN05 IN04 IN03 IN02 IN01 S t a t u s i n d i c a t o r L E D 87654321 For the assignment of the illustrated (byte.bit) view to your INTERBUS control or computer system, please refer to the DB GB IBS SYS ADDRESS data sheet.