26PC0050D2 SENSORTECHNICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
26PC Series (mbar) Temp. compensated and calibrated pressure sensors 1/4June 2005 / 596 www.sensortechnics.com
FEATURES
- High impedance bridge
- Miniature package
- Different pinning configurations
- Usable for wet/wet applications SPECIFICATIONS Maximum ratings Supply voltage Temperature limits Storage Operating Lead temperature (10 sec. soldering) Humidity limits Vibration (MIL-STD-202, Meth. 213) Mechanical shock(qualification tested) Proof pressure all 50, 100 and 250 mbar devices all 1 bar devices all 2 bar devices all 5 bar devices all 10 and 16 bar devices 16 V -55 to +100°C -40 to +85°C 300°C 0...100 %RH 150 g half sine 11 msec. 150 g 1.4 bar 3 bar 4 bar 12 bar 35 bar ELECTRICAL CONNECTION SERVICE All media compatible with port 1: - polyetherimide - silver-filled silicone - silicon nitride port 2 9: - polyetherimide - fluor-silicone - silicon Scale: 1 cm 1 inch Output Vs
26PC Series (mbar) Temp. compensated and calibrated pressure sensors 2/4 June 2005 / 596 www.sensortechnics.com COMMON PERFORMANCE CHARACTERISTICS Vs = 10.0 ± 0.01 V, tamb = 25°C (unless otherwise noted) Specification notes: 10. The maximum specified pressure which may be applied to the sensor without causing a permanent change in the output characteristics. Span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure. Span is ratiometric to the supply voltage. Linearity (BSL), the deviation of measured output at constant temperature (25°C) from "Best Straight Line" determined by three points, offset pressure, full-scale pressure and half full-scale pressure. Error band of the offset voltage, span or bridge impedance in the specified temperature range, relative to the 25°C reading. Repeatability, the deviation in output readings for successive application of any given input pressure (all other conditions remaining constant. Hysteresis, the error defined by the deviation in output signal obtained when a specific pressure point is approached first with increasing pressure, then with decreasing pressure or vice versa (all other conditions remaining constant). Response time for 0 to full-scale pressure step change, readings taken at 10 % and 90 % of full-scale pressure. Long term stability of offset and span over a period over one year. The sensors might be used on both ports, for media compatible with the components, specified under "Service" (page 1). Other sealing materials are available on request. Minimum order quantities might be required. Other pressure port styles, like barbed ones, luers, modular, M5, needle style or flow through connection, are available on request. Minimum order quantities might be required. scitsiretcarahC. niM. pyT. xaMt inU tesffoerusserporeZs ecivedrab5lla secivedrehtolla 0.2- 5.1- 0.2+ 5.1+ Vm)C°05-0(stceffeerutarepmeT 4 tesffOs ecivedrabm0001ot05lla secivedrab2lla secivedrehtolla 5.0± 57.0± 0.1± 0.1± 5.1± 0.2± napSs ecivedrabm001dna05lla secivedrehtolla 0.1± 0.2± 5.1± naps% )LSB,1P>2P(ytiraeniL 3 secivedrabm0001ot05lla secivedrab2lla secivedrehtolla 52.0± 1.0± 1.0± 5.0± 2.0± 7.0± siseretsyhdnaytilibataepeR 5 2.0± ytilibatsmretgnoL 7 5.0± emitesnopseR 6 0.1s m PRESSURE SENSOR CHARACTERISTICS Vs = 10.0 ± 0.01 V, tamb = 20°C (unless otherwise noted) rebmuntraPe russerpgnitarepO napselacs-lluF 2 .pytytivitisneS.niM. pyT. xaM Axx0500CP62r abm05-0V m5.01V m0.21V m6.31r abm/Vµ042 Axx0010CP62r abm001-0V m0.02V m0.42V m0.72r abm/Vµ042 Axx0520CP62r abm052-0V m5.33V m0.63V m5.83r abm/Vµ441 Axx0K10CP62r ab1-0V m0.39V m0.79V m0.001r abm/Vµ79 Axx0K20CP62r ab2-0V m0.19V m0.79V m0.001r ab/Vm5.84 Axx0K50CP62r ab5-0V m0.96V m0.27V m0.67r ab/Vm4.41 Axx0K01CP62r ab01-0V m0.28V m0.78V m0.29r ab/Vm7.8 Axx0K61CP62r ab61-0V m0.331V m0.041V m0.741r ab/Vm7.8 [ V½ full scale – { Vfull scale - Voffset (full scale pressure) x (½ full scale pressure) + Voffset }] : 2 (Vfull scale) x 100 % where: V = measured value for each device
26PC Series (mbar) Temp. compensated and calibrated pressure sensors 3/4June 2005 / 596 www.sensortechnics.com OUTLINE DRAWINGS 10 26PCxxxxG6A (single inline pinning, 1 x 4), gage pressure devices mass: 2 g dimensions in mm 26PCxxxxG2A (dual inline pinning, 2 x 2), gage pressure devices mass: 2 g dimensions in mm 12,7 7,9 Ø 6,4 Ø 5,1 Ø 1,93 Ø 1,27 PIN 1 12,7 9,1 16,2 21,8 27,9 PIN 2 PIN 3 PIN 4 4 x 1,024 x 0,5 5,1 4 x 0,41 8,4 12,7 12,7 3 x 2,54 2,29 4 x 1,02 NOM 15,2 7,9 Ø 6,4 Ø 5,1 Ø 1,93 Ø 1,27 PIN 1 9,1 16,2 21,8 1,78 4 x 0,41 4 3 2 1
26PC Series (mbar) Temp. compensated and calibrated pressure sensors 4/4 June 2005 / 596 www.sensortechnics.com 2 6 PC xxxx x x A 10 Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. 26PC series compensated Pressure range 0050: 0 - 50 mbar 0100: 0 - 100 mbar 0250: 0 - 250 mbar 01K0: 0 - 1 bar 02K0: 0 - 2 bar 05K0: 0 - 5 bar 10K0: 0 - 10 bar 16K0: 0 - 16 bar Pressure port (Ø 5.1 mm) Pinning 2: dual inline pinning, 2 x 2 (not available for differential devices) 6: single inline pinning, 1 x 4 Pressure mode D: differential pressure G: gage pressure
ORDERING INFORMATION
26PCxxxxD6A (single inline pinning, 1 x 4), differential pressure devices mass: 2 g dimensions in mm 12,7 3 x 2,54 2,29 4 x 1,02 NOM 15,2 7,9 Ø 6,4 Ø 5,1 Ø 1,93 Ø 1,27 PIN 1 12,7 9,1 16,2 21,8 1,78 4 x 0,41 4 3 2 1 34,4 11,7