DCR030 STEGO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
M INT EXT PRODUCT CATALOGUE - STEGO HEATING TECHNICAL DATA Heating element high performance cartridge Temperature safety cut-out with automatic reset and second-tier one shot fuse to protect against overheating in case of fan failure Heater body extruded aluminium profile Axial fan, ball bearing airflow 160 m³/h, free flow service life 50,000 h at +25 °C (+77 °F) Connection 2-pole „Push-In“ connection clamp stranded wire1 1.5 mm² (AWG 16) with strain relief; max. 2.5 mm² (AWG 12) Casing plastic according to UL94 V-0, black Mounting screw fixing (M5), torque 2 Nm max., washers have to be used Fitting position vertical airflow (air outlet up) Dimensions 166 x 145 x 100 mm Weight approx. 1.3 kg Operating temperature -20 to +75 °C (-4 to +167 °F) Storage temperature -40 to +80 °C (-40 to +176 °F) Operating / Storage humidity max. 90 % RH (non-condensing) Protection type / Protection class IP20 / II (double insulated) Approvals UL File No. E234324, VDE, EAC Note other versions (heating capacities, setting ranges) as well as operating voltage DC 48 V on request ¹ When connecting with stranded wires, wire end ferrules must be used. HIGH-PERFORMANCE FAN HEATER DCR 030 | DC 24 V, DC 56 V – 200 W to 800 W The compact high performance fan heater prevents formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The fan heater is available with an integrated electronic thermostat or integrated electronic hygrostat. The model with thermostat is available with internal or external sensor. The fan heater with integrated hygrostat is equipped with an external sensor. The external sensor can be positioned freely anywhere in the enclosure for precise measurements of temperature and humidity. The DCR 030 was designed as a stationary unit for the bottom of the enclosure. For wall fixing the fan heater DCR 130 is recommended. > High DC heating performance > Integrated thermostat or hygrostat (optional) > Small hysteresis > Integrated switch module > Screw fixing > Optical indicator (LED) Connection diagram TECHNICAL DATASHEET
STEGO - PRODUCT CATALOGUEHEATING Art. No. Model Operating voltage Heating capacity Recommended pre-fuse T (time-delay) Setting range3 temperature / humidity 03092.1-12 Fan heater with integrated thermostat with internal temperature sensor DC 24 V 200 W 16,0 A -20 to +40 °C 03092.1-13 Fan heater with integrated thermostat with connector for external temperature sensor² DC 24 V 200 W 16,0 A -20 to +40 °C 03097.3-12 Fan heater with integrated thermostat with internal temperature sensor DC 56 V 800 W 20,0 A -20 to +40 °C 03097.3-13 Fan heater with integrated thermostat with connector for external temperature sensor² DC 56 V 800 W 20,0 A -20 to +40 °C 03092.1-03 Fan heater with integrated hygrostat with connector for external humidity sensor² DC 24 V 200 W 16,0 A 40 to 90 % RH 03095.3-03 Fan heater with integrated hygrostat with connector for external humidity sensor² DC 56 V 600 W 20,0 A 40 to 90 % RH ² The external sensor needs to be ordered separately. ³ Switch difference temperature: 3 K (±1 K tolerance) at +25 °C (+77 °F), 50 % RH; switch difference humidity: 4 % RH (±1 % tolerance) at +25 °C (+77 °F), 50 % RH. Art. No. Length 267071 1 m 267072 2 m 267126 3 m ACCESSORIES EXTERNAL SENSOR The external sensor is not included in the delivery of the DCR 030. It can be ordered separately. The external sensor can be positioned freely anywhere in the enclosure for precise measurements of temperature and humidity. TECHNICAL DATASHEET