25ACBEW GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 5 25ACBEW_4 – Rev. 2020-1.2 Specifications subject to change without notice. Certification Model Output power [W] Output [V] Output [mA] Efficiency [%, typ] Capacitive load [µF, max] UL/CE/CB 25ACBEW_03S4 13.53 3.3 4100 75 48000 UL/CE/CB 25ACBEW_05S4 20.5 5 4100 78 12240 UL/CE/CB 25ACBEW_09S4 22.5 9 2500 80 5600 UL/CE/CB 25ACBEW_12S4 25 12 2100 82 5400 UL/CE/CB 25ACBEW_15S4 24 15 1600 83 2400 UL/CE/CB 25ACBEW_24S4 26.4 24 1100 85 1440 UL/CE/CB 25ACBEW_48S4 24 48 500 87 600 UL-62368-1 (E347551) 25ACBEW_4 series 25W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Universal input: 85~305VAC/100~430VDC AC and DC dual-use (input from the same terminal) Operating ambient tempera- ture range: -40°C ~ +85°C High Isolation 4000VAC Short circuit protection (SCP) High efficiency, high reliability Low ripple and noise Output over voltage, over current protection Meet EMI CISPR32/EN55032 CLASS B IEC/EN/UL62368 approved AC-DC Converter 25 Watt The 25ACBEW_4 series is a ultra-slim power converters. It features universal AC input and at the same time accepts DC input voltage, low power consumption, high efficiency, high reliability and double or reinforced insulation with an input to output isolation test voltage of 4000VAC. The converters meet IEC/EN61000-4, CISPR32/EN55032, UL/ IEC62368 and EN62368 standards, and are widely used in industrial, electricity, instrumentation, telecommunications and civil applications. For extremely harsh EMC environment, we recommend using the application circuit show in Design Reference of this datasheet. Output specifications Voltage set accuracy • 3.3V: ±3% (typ)

  • others: ±2% (typ) Line regulation (Rated load) ±0.5% (typ) Load regulation (0% to 100%) ±1% Ripple & Noise* 50mV typ., 100mV max. Stand-by power consumption 230VAC, 0.5W max. Short circuit protection Hiccup mode, indefinite (automatic recovery) Over current protection 120%-300%Io, self-recovery Over voltage protection • 3.3V/5V: 7.5V
  • 9V: 15V
  • 12V/15V: 20V
  • 24V: 30V
  • 48V: 60V Hold-up time • 115VAC: 10ms (typ)
  • 230VAC: 60ms (typ) * The “parallel cable” method is used for ripple and noise test. Input specifications Input voltage range 85~305VAC, 100~430VDC Input frequency 47~63Hz Input current (full load) 115VAC
  • 0.6A (typ) 230VAC
  • 0.34A (typ) Inrush current (<2ms, cold start) 115VAC
  • 20A (typ) 230VAC
  • 40A (typ) External fuse (mandatory) 3.15A/300V slow-blow, required Hot plug Unavailable Example: 25ACBEW_05S4 25 = 25Watt; AC = AC-DC; B = case style; E = Cost effective; W = Wide input; 05 = 5Vout; S = Single Output; 4 = 4kVAC isolation Note: 1. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta = 25°C, humidity <75% with nominal input voltage and rated output load; 2. All index testing methods in this datasheet are based on our company corporate standards; 3. We can provide product customization service, please contact our technicians directly for specific information; 4. Products are related to laws and regulations: see „Features“ and „EMC“; 5. Our products shall be classified according to ISO14001 and related environmen- tal laws and regulations, and shall be handled by qualified units.

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 5 25ACBEW_4 – Rev. 2020-1.2 Specifications subject to change without notice. 25ACBEW_4 series 25W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Common specifications Operating temperature range -40°C ~ +85°C Storage temperature range -40°C ~ +85°C Case temperature range +95°C MAX Power derating • -40°C ~ -10°C: 1.67 %/°C (min)

  • 85VAC-100VAC: 1.00 %/VAC (min)
  • 277VAC-305VAC: 1.00 %/VAC (min) Humidity 95% MAX Temperature coefficient 0.02%/°C Soldering temperature Wave-soldering: 260 ± 5°C; time: 5 - 10s Manual-welding: 360 ± 10°C; time: 3 - 5s I/O-isolation voltage 4000VAC/1Min EMC / EMI / CE CISPR32/EN55032 CLASS B EMC / EMI / RE CISPR32/EN55032 CLASS B EMC / EMS / ESD IEC/EN 61000-4-2 Contact ±6KV / Air ±8KV perf. Criteria B EMC / EMS / RS IEC/EN 61000-4-3 10V/m perf. Criteria A EMC / EMS / EFT • IEC/EN 61000-4-4 ± 2kV perf. Criteria B
  • IEC/EN 61000-4-4 ± 4kV (see EMC recommended circuit) perf. Criteria B EMC / EMS / Surge • IEC/EN 61000-4-5 line to line ±1KV/ line to ground ±2KV perf. Criteria B
  • IEC/EN 61000-4-5 line to line ±2KV/ line to ground ±4KV perf. Criteria B (see EMC recommended circuit) EMC / EMS / CS IEC/EN61000-4-6 10 Vr.m.s perf. Criteria A EMC / EMS / Voltage dips, short and interruptions immunity IEC/EN61000-4-11 0%-70% perf. Criteria B Safety standards IEC62368/EN62368/UL62368 Safety class CLASS II Case material UL94V-0 Install PCB mounting MTBF (MIL-HDBK-217F@25°C) >300,000h Cooling Free air convection Package 52.5 x 27.5 x 23.5 mm 96.10 x 54.00 x 32.00mm (Chassis mounting) 96.10 x 54.00 x 36.60mm (Dinrail mounting) Weight 120g 170g (Chassis mounting) 210g (Dinrail mounting) Typical characteristics

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 5 25ACBEW_4 – Rev. 2020-1.2 Specifications subject to change without notice. 25ACBEW_4 series 25W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Efficiency Typical application circuit EMC compliance recommended circuit Model C1 (µF) C2 (µF) Fuse MOV TVS 25ACBEW_03S4 1 330 3.15A/300V slow-blow, required S14K350 SMBJ7.0A 25ACBEW_05S4 1 330 3.15A/300V slow-blow, required S14K350 SMBJ7.0A 25ACBEW_09S4 1 330 3.15A/300V slow-blow, required S14K350 SMBJ12A 25ACBEW_12S4 1 330 3.15A/300V slow-blow, required S14K350 SMBJ20A 25ACBEW_15S4 1 330 3.15A/300V slow-blow, required S14K350 SMBJ20A 25ACBEW_24S4 1 120 3.15A/300V slow-blow, required S14K350 SMBJ30A 25ACBEW_48S4 1 68 3.15A/300V slow-blow, required S14K350 SMBJ64A Component Recommended value MOV S14K350 CY1, CY2 1000pF/400VAC CX 0.1μF/310VAC LCM 10mH L1 4.7μH/2A FC-LX1D 2KV/4KV EMC filter FUSE 3.15A/300V slow-blow, required 25ACBEW_24S4 25ACBEW_12S4 25ACBEW_05S4 25ACBEW_24S4 25ACBEW_12S4 25ACBEW_05S4 Note: We recommend using an electrolytic capacitor with high frequency, and low ESR rating for C2 (refer to manufacture’s datasheet). Choose a capacitor voltage rating with at least 20% margin, in other words not exceeding 80%. C1 is a ceramic capa- citor used for filtering high-frequency noise and TVS is a recommended suppressor diode to protect the application in case of a converter failure.

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 4 of 5 25ACBEW_4 – Rev. 2020-1.2 Specifications subject to change without notice. 25ACBEW_4 series 25W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Trim Mechanical dimensions Trim Function for Output Voltage Adjustment (open if unused)

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 5 of 5 25ACBEW_4 – Rev. 2020-1.2 Specifications subject to change without notice. 25ACBEW_4 series 25W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Chassis mounting Din Rail mounting