24PC0050D2 SENSORTECHNICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
24PC Series (mbar) Unamplified, uncompensated pressure sensors 1/4June 2005 / 602 www.sensortechnics.com
FEATURES
- High impedance bridge
- Miniature package
- Different pinning configurations
- Usable for wet/wet applications SPECIFICATIONS Maximum ratings Supply voltage Temperature limits Storage Operating Lead temperature (10 sec. soldering) Humidity limits Vibration (0 to 2000 Hz) (qualification tested) Mechanical shock (qualification tested) Proof pressure all 50, 100 and 250 mbar devices all 1 bar devices all 2 bar devices all 5 bar devices all 10 and 16 bar devices 12 V -55 to +100°C -40 to +85°C 300°C 0...100 %RH 20 g sine 150 g 1.4 bar 3 bar 4 bar 12 bar 35 bar ELECTRICAL CONNECTION SERVICE All media compatible with port 1: - polyetherimide - silver-filled silicone - silicon nitride port 2 9: - polyetherimide - fluor-silicone - silicon Scale: 1 cm 1 inch Output Vs
24PC Series (mbar) Unamplified, uncompensated pressure sensors 2/4 June 2005 / 602 www.sensortechnics.com [ V½ full scale – { Vfull scale - Voffset (full scale pressure) x (½ full scale pressure) + Voffset }] : 2 (Vfull scale) x 100 % where: V = measured value for each device COMMON PERFORMANCE CHARACTERISTICS Vs = 10.0 ± 0.01 V, tamb = 25°C (unless otherwise noted) scitsiretcarahC. niM. pyT. xaMt inU tesffoerusserporeZ 03-0 3+ Vm)C°05-0(stceffeerutarepmeT 4 tesffO0 .2± napS0 002- C°/mppecnadepmiegdirbnostceffeerutarepmeT 4 0022+ )LSB,1P>2P(ytiraeniL 3 52.0±0 .1± naps%siseretsyhdnaytilibataepeR 5 51.0± ytilibatsmretgnoL 7 5.0± emitesnopseR 6 0.1s m PRESSURE SENSOR CHARACTERISTICS Vs = 10.0 ± 0.01 V, tamb = 25°C (unless otherwise noted) rebmuntraPe russerpgnitarepO napselacs-lluF 2 .pytytivitisneS.niM. pyT. xaM Axx0500CP42r abm05-0V m12V m33V m44r abm/Vµ066 Axx0010CP42r abm001-0V m44V m66V m88r abm/Vµ066 Axx0520CP42r abm052-0V m16V m38V m501r abm/Vµ333 Axx0K10CP42r ab1-0V m951V m812V m672r abm/Vµ022 Axx0K20CP42r ab2-0V m232V m023V m014r abm/Vµ061 Axx0K50CP42r ab5-0V m311V m361V m512r abm/Vµ6.23 Axx0K01CP42r ab01-0V m48V m321V m361r abm/Vµ3.21 Axx0K61CP42r ab61-0V m431V m791V m062r abm/Vµ3.21 Specification notes: 10. The maximum specified pressure which may be applied to the sensor without causing a permanent change in the output characteristics. Span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure. Span is ratiometric to the supply voltage. Linearity (BSL), the deviation of measured output at constant temperature (25°C) from "Best Straight Line" determined by three points, offset pressure, full-scale pressure and half full-scale pressure. Error band of the offset voltage, span or bridge impedance in the specified temperature range, relative to the 25°C reading. Repeatability, the deviation in output readings for successive application of any given input pressure (all other conditions remaining constant. Hysteresis, the error defined by the deviation in output signal obtained when a specific pressure point is approached first with increasing pressure, then with decreasing pressure or vice versa (all other conditions remaining constant). Response time for 0 to full-scale pressure step change, readings taken at 10 % and 90 % of full-scale pressure. Long term stability of offset and span over a period over one year. The sensors might be used on both ports, for media compatible with the components, specified under "Service" (page 1). Other sealing materials are available on request. Minimum order quantities might be required. Other pressure port styles, like barbed ones, luers, modular, M5, needle style or flow through connection, are available on request. For these specials see the data sheet "24/26PC specials". Minimum order quantities might be required, call Sensortechnics for assistance.
24PC Series (mbar) Unamplified, uncompensated pressure sensors 3/4June 2005 / 602 www.sensortechnics.com OUTLINE DRAWINGS 10 24PCxxxxG6A (single inline pinning, 1 x 4), gage pressure devices mass: 2 g dimensions in mm 24PCxxxxG2A (dual inline pinning, 2 x 2), gage pressure devices mass: 2 g dimensions in mm 12,7 7,9 Ø 6,4 Ø 5,1 Ø 1,93 Ø 1,27 PIN 1 12,7 9,1 16,2 21,8 27,9 PIN 2 PIN 3 PIN 4 4 x 1,024 x 0,5 5,1 4 x 0,41 8,4 12,7 12,7 3 x 2,54 2,29 4 x 1,02 NOM 15,2 7,9 Ø 6,4 Ø 5,1 Ø 1,93 Ø 1,27 PIN 1 9,1 16,2 21,8 1,78 4 x 0,41 4 3 2 1
24PC Series (mbar) Unamplified, uncompensated pressure sensors 4/4 June 2005 / 602 www.sensortechnics.com 2 4 PC xxxx x x A 10 Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. 24PC series non compensated Pressure range 0050: 0 - 50 mbar 0100: 0 - 100 mbar 0250: 0 - 250 mbar 01K0: 0 - 1 bar 02K0: 0 - 2 bar 05K0: 0 - 5 bar 10K0: 0 - 10 bar 16K0: 0 - 16 bar Pressure port (Ø 5.1 mm) Pinning 2: dual inline pinning, 2 x 2 (not available for differential devices) 6: single inline pinning, 1 x 4 Pressure mode D: differential pressure G: gage pressure
ORDERING INFORMATION
24PCxxxxD6A (single inline pinning, 1 x 4), differential pressure devices mass: 2 g dimensions in mmP1 12,7 3 x 2,54 2,29 4 x 1,02 NOM 15,2 7,9 Ø 6,4 Ø 5,1 Ø 1,93 Ø 1,27 PIN 1 12,7 9,1 16,2 21,8 1,78 4 x 0,41 4 3 2 1 34,4 11,7