24PC0050DSMT SENSORTECHNICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
24PC SMT Series (mbar) Unamplified, uncompensated pressure sensors 1/4June 2005 / 604 www.sensortechnics.com
FEATURES
- High impedance bridge
- True surface mount miniature package
- Usable for wet/wet applications SPECIFICATIONS Maximum ratings Supply voltage Temperature limits Storage Operating Lead temperature (10 sec. soldering) Humidity limits Vibration (0 to 2000 Hz) (qualification tested) Mechanical shock(qualification tested) Proof pressure 24PC0050DSMT 24PC0100DSMT 24PC0250DSMT 24PC01K0DSMT 12 V -55 to +100°C -40 to +85°C 260°C 0...100 %RH 20 g sine 50 g 1.4 bar 1.4 bar 1.4 bar 3.0 bar ELECTRICAL CONNECTION SERVICE All media compatible with port 1: - polyphtalamide - silver-filled silicone - silicon nitride port 2: - polyphtalamide - fluor-silicone - silicon Scale: 1 cm 1/2 inch Output Vs
24PC SMT Series (mbar) Unamplified, uncompensated pressure sensors 2/4 June 2005 / 604 www.sensortechnics.com COMMON PERFORMANCE CHARACTERISTICS Vs = 10.0 ± 0.01 V, tamb = 25°C (unless otherwise noted) Specification notes: The maximum specified pressure which may be applied to the sensor without causing a permanent change in the output characteristics. Span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure. Span is ratiometric to the supply voltage. Linearity (BSL), the deviation of measured output at constant temperature (25°C) from "Best Straight Line" determined by three points, offset pressure, full-scale pressure and half full-scale pressure. Error band of the offset voltage, span or bridge impedance in the specified temperature range, relative to the 25°C reading. Repeatability, the deviation in output readings for successive application of any given input pressure (all other conditions remaining constant. Hysteresis, the error defined by the deviation in output signal obtained when a specific pressure point is approached first with increasing pressure, then with decreasing pressure or vice versa (all other conditions remaining constant). Response time for 0 to full-scale pressure step change, readings taken at 10 % and 90 % of full-scale pressure. Long term stability of offset and span over a period over one year. The sensors might be used on both ports, for media compatible with the components, specified under "Service" (page 1). scitsiretcarahC. niM. pyT. xaMt inU tesffoerusserporeZ 03-0 3+ Vm)C°05-0(stceffeerutarepmeT 4 tesffO0 .2± napS0 002- C°/mppecnadepmiegdirbnostceffeerutarepmeT 4 0022+ )LSB,1P>2P(ytiraeniL 3 52.0± naps%siseretsyhdnaytilibataepeR 5 51.0± ytilibatsmretgnoL 7 5.0± emitesnopseR 6 0.1s m PRESSURE SENSOR CHARACTERISTICS Vs = 10.0 ± 0.01 V, tamb = 20°C (unless otherwise noted) rebmuntraPe russerpgnitarepO napselacs-lluF 2 .pytytivitisneS.niM. pyT. xaM TMSD0500CP42r abm05-0V m12V m33V m44r abm/Vµ056 TMSD0010CP42r abm001-0V m34V m56V m78r abm/Vµ056 TMSD0520CP42r abm052-0V m16V m38V m501r abm/Vµ333 TMSD0K10CP42r abm0001-0V m951V m812V m672r abm/Vµ022 [ V½ full scale – { Vfull scale - Voffset (full scale pressure) x (½ full scale pressure) + Voffset }] : 2 (Vfull scale) x 100 % where: V = measured value for each device
24PC SMT Series (mbar) Unamplified, uncompensated pressure sensors 3/4June 2005 / 604 www.sensortechnics.com mass : 0.5 g dimensions in mm (inches) OUTLINE DRAWING
24PC SMT Series (mbar) Unamplified, uncompensated pressure sensors 4/4 June 2005 / 604 www.sensortechnics.com 2 4 PC xxxx D SMT Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. 24PC series non compensated Pressure range 0050: 0 - 50 mbar 0100: 0 - 100 mbar 0250: 0 - 250 mbar 01K0: 0 - 1000 mbar SMT package Differential pressure
ORDERING INFORMATION
dimensions in mm (inches)