24PC0035D2

24PC0035D2 SENSORTECHNICS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

24PC Series (psi) Unamplified, uncompensated pressure sensors 1/4February 2005 / 603 www.sensortechnics.com

FEATURES

• High impedance bridge
• Miniature package
• Different pinning configurations
• Usable for wet/wet applications SPECIFICATIONS Maximum ratings Supply voltage Temperature limits Storage Operating Lead temperature (10 sec. soldering) Humidity limits Vibration (0 to 2000 Hz) (qualification tested) Mechanical shock (qualification tested) Proof pressure all 0.5, 1 and 5 psi devices all 15 psi devices all 30 psi devices all 100 psi devices all 250 psi devices 12 V -55 to +100°C -40 to +85°C 300°C 0...100 %RH 20 g sine 150 g 20 psi 45 psi 60 psi 200 psi 500 psi ELECTRICAL CONNECTION SERVICE All media compatible with port 1: - polyetherimide - silver-filled silicone - silicon nitride port 2 9: - polyetherimide - fluor-silicone - silicon Scale: 1 cm 1 inch Output Vs

24PC Series (psi) Unamplified, uncompensated pressure sensors 2/4 February 2005 / 603 www.sensortechnics.com COMMON PERFORMANCE CHARACTERISTICS Vs = 10.0 ± 0.01 V, tamb = 25°C (unless otherwise noted) scitsiretcarahC. niM. pyT. xaMt inU tesffoerusserporeZ 03-0 3+ Vm)C°05-0(stceffeerutarepmeT 4 tesffO0 .2± napS0 002- C°/mppecnadepmiegdirbnostceffeerutarepmeT 4 0022+ )LSB,1P>2P(ytiraeniL 3 52.0±0 .1± naps%siseretsyhdnaytilibataepeR 5 51.0± ytilibatsmretgnoL 7 5.0± emitesnopseR 6 0.1s m PRESSURE SENSOR CHARACTERISTICS Vs = 10.0 ± 0.01 V, tamb = 25°C (unless otherwise noted) Specification notes: 10. The maximum specified pressure which may be applied to the sensor without causing a permanent change in the output characteristics. Span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure. Span is ratiometric to the supply voltage. Linearity (BSL), the deviation of measured output at constant temperature (25°C) from "Best Straight Line" determined by three points, offset pressure, full-scale pressure and half full-scale pressure. Error band of the offset voltage, span or bridge impedance in the specified temperature range, relative to the 25°C reading. Repeatability, the deviation in output readings for successive application of any given input pressure (all other conditions remaining constant. Hysteresis, the error defined by the deviation in output signal obtained when a specific pressure point is approached first with increasing pressure, then with decreasing pressure or vice versa (all other conditions remaining constant). Response time for 0 to full-scale pressure step change, readings taken at 10 % and 90 % of full-scale pressure. Long term stability of offset and span over a period over one year. The sensors might be used on both ports, for media compatible with the components, specified under "Service" (page 1). Other sealing materials are available on request. Minimum order quantities might be required. Other pressure port styles, like barbed ones, luers, modular, M5, needle style or flow through connection, are available on request. For these specials see the data sheet "24/26PC specials". Minimum order quantities might be required, call Sensortechnics for assistance. [ V½ full scale – { Vfull scale - Voffset (full scale pressure) x (½ full scale pressure) + Voffset }] : 2 (Vfull scale) x 100 % where: V = measured value for each device gnitsiLr ebmunredrOe russerpgnitarepO napselacs-lluF 2 .niM. pyT. xaM xxAFECP42A xx5300CP42) rabm5.43(isp5.0-0V m42V m53V m64 xxAFACP42A xx0700CP42) rabm96(isp1-0V m03V m54V m06 xxAFBCP42A xx0530CP42) rabm543(isp5-0V m58V m511V m541 xxAFCCP42A xx0001CP42) rabm4301(isp51-0V m561V m522V m582 xxAFDCP42A xx0002CP42) rabm8602(isp03-0V m042V m033V m024 xxAFFCP42A xx0007CP42) rab9.6(isp001-0V m651V m522V m492 xxAFGCP42A xx0K71CP42) rab2.71(isp052-0V m541V m212V m082

24PC Series (psi) Unamplified, uncompensated pressure sensors 3/4February 2005 / 603 www.sensortechnics.com OUTLINE DRAWINGS 10 24PCxxxxG6A (single inline pinning, 1 x 4), gage pressure devices mass: 2 g dimensions in mm 24PCxxxxG2A (dual inline pinning, 2 x 2), gage pressure devices mass: 2 g dimensions in mm 12,7 7,9 Ø 6,4 Ø 5,1 Ø 1,93 Ø 1,27 PIN 1 12,7 9,1 16,2 21,8 27,9 PIN 2 PIN 3 PIN 4 4 x 1,024 x 0,5 5,1 4 x 0,41 8,4 12,7 12,7 3 x 2,54 2,29 4 x 1,02 NOM 15,2 7,9 Ø 6,4 Ø 5,1 Ø 1,93 Ø 1,27 PIN 1 9,1 16,2 21,8 1,78 4 x 0,41 4 3 2 1

24PC Series (psi) Unamplified, uncompensated pressure sensors 4/4 February 2005 / 603 www.sensortechnics.com 2 4 PC xxxx x x A 10 Pressure port (Ø 5.1 mm) Pinning 2: dual inline pinning, 2 x 2 (not available for differential devices) 6: single inline pinning, 1 x 4 Pressure mode D: differential pressure G: gage pressure

ORDERING INFORMATION

24PCxxxxD6A (single inline pinning, 1 x 4), differential pressure devices mass: 2 g dimensions in mmP1 12,7 3 x 2,54 2,29 4 x 1,02 NOM 15,2 7,9 Ø 6,4 Ø 5,1 Ø 1,93 Ø 1,27 PIN 1 12,7 9,1 16,2 21,8 1,78 4 x 0,41 4 3 2 1 34,4 11,7 24PC series non compensated Pressure range 0035: 0 - 0.5 psi(34.5 mbar) 0070: 0 - 1 psi (69 mbar) 0350: 0 - 5 psi (345 mbar) 1000: 0 - 15 psi (1034 mbar) 2000: 0 - 30 psi (2068 mbar) 7000: 0 - 100 psi (6.9 bar) 17K0: 0 - 250 psi (17.2 bar) Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.