VTX-214-0005-103 VIGORTRONIX | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Vigortronix.com D0068 Issue 4 Vigortronix, 16 De Havilland Way, Witney, Oxfordshire, OX29 0YG, UK Vigortronix is a trading name of Vigortronix (UK) Limited Please contact Vigortronix for any enquiries. Products can be altered to suit custom requirements. The information contained in this document is subject to change without notice. Features:
- 0.5W Low Profile <14.5mm Height
- High Temperature 80OC, 100% Loading
- Single Output - Regulated
- Wide Input Range: 85 - 265VAC, 47 - 63Hz
- Output Range: 3.3V - 48VDC
- Low Standby Power <0.3W
- Fully Isolated Pri - Sec >3600Vrms
- Insulation: Class II
- Materials: UL94-V0
- Safety: EN61558, EN60950, CE
0.5 Watt Low Profile
(VDC) Output Cur- rent (mA) Ambient Temp. (OC) Efficiency Typical Voltage Range VTX-214-0005-103 0.5 3.3 151 (100% Load) >60% 85 - 265VAC (100-370VDC) VTX-214-0005-1035 0.5 3.5 142 VTX-214-0005-105 0.5 5 100 VTX-214-0005-106 0.5 6 84 VTX-214-0005-107 0.5 7.5 66 VTX-214-0005-108 0.5 8 63 VTX-214-0005-109 0.5 9 55 VTX-214-0005-110 0.5 10 50 VTX-214-0005-112 0.5 12 42 VTX-214-0005-115 0.5 15 33 VTX-214-0005-118 0.5 18 28 VTX-214-0005-124 0.5 24 21 VTX-214-0005-148 0.5 48 10 Note: Other output voltages are available upon request. Optional Universal PCB mounting kit. Part Number: VTX-214-PCB1 Farnell Part: 246 4718 Rapid Electronics Part: 84-2157
Vigortronix.com D0068 Issue 4 Vigortronix, 16 De Havilland Way, Witney, Oxfordshire, OX29 0YG, UK Vigortronix is a trading name of Vigortronix (UK) Limited Please contact Vigortronix for any enquiries. Products can be altered to suit custom requirements. The information contained in this document is subject to change without notice. Model: 0.5 Watt Specification INPUT Pin 4: L Pin 3: N Voltage Range 85 ~ 265VAC / 47 ~ 63Hz (100 - 370VDC) Current 100mA Max (100VAC) / 70mA Max (240VAC) Inrush Current 6A Max (115VAC) / 10A Max (240VAC) No Load power 0.3W Max Leakage Current 0.2 mA Max OUTPUT Pin 2: DC+ Pin 1: GND Voltage Accuracy <5% (3.3 - 7.5VDC 7%) Ripple <5% Vout (Vp~p, with Output Capacitor) Noise <5% Vout Max (Vp~p, with Output Capacitor) Efficiency @ 230VAC >60% Minimum Load 0 Protection Over Power Hiccup mode Over Voltage Hiccup mode Short Circuit Protection Hiccup mode Dielectric Isolation Input to Output 3000Vrms, 5mA 1 Min (3600VAC, 2sec) Enviroment Operating Temperature -25OC ~ +80OC (See Derating Curve) Storage Temperature -40OC ~ +105OC MTBF >300,000Hrs @ 25OC (MIL-HDBK-217F) Weight 18g Safety Agency Approval Compliance with IEC60950-1, EN60950-1, EN61558-1, EN61558-2-6, EN61558-2-17 EMC EMI Compliance with EN55022 Class B EMS Compliance with EN55024, EN55014-1, EN55014-2, EN61000-3-2 Class A, EN61000-3-3
Vigortronix.com D0068 Issue 4 Vigortronix, 16 De Havilland Way, Witney, Oxfordshire, OX29 0YG, UK Vigortronix is a trading name of Vigortronix (UK) Limited Please contact Vigortronix for any enquiries. Products can be altered to suit custom requirements. The information contained in this document is subject to change without notice. Derating Graph: Unit weight: 18g Notes: The Power Supply is considered a component which will be installed into a final equipment. It is recommended to fit a 0.1uF/275V X2 Capacitor on the Input for EMC On the Input to meet safety requirement use a 1A/250V Slow-Blow Fuse Dimensions: Converter Schematic Optional Recommendations: If required to reduce Ripple/ Noise further on the output, fit a Electrolytic and ceramic Capacitor.