2395A AEROFLEX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

For the very latest specifications visit www.aeroflex.com AA ssppeeccttrruumm aannaallyyzzeerr wwiitthh oouuttssttaannddiinngg ppeerrffoorrmmaannccee aanndd aa uusseerr ffrriieennddllyy vviissuuaall iinntteerrffaaccee ssiimmpplliiffyyiinngg mmaannyy ccoommpplleexx mmeeaassuurreemmeennttss Spectrum Analyzers 2395A9 kHz to 26.5 GHz Spectrum Analyzer

  • 9 kHz to 26.5 GHz fully synthesized frequency range
  • Lightweight, portable and rugged construction at 12 kg (26.5 lbs)
  • Excellent TFT color display
  • Comprehensive marker facility
  • Wide input signal range +30 dBm to -1 10 dBm
  • Semi-automated measurements
  • USB 2.0 Interface
  • Extremely user friendly MMI reduces risk of operator error
  • Tune facility
  • GPIB as standard
  • AM/FM demodulation A “Value for Money” Product The 2395A is the latest in the range of spectrum analyzers from Aeroflex providing exceptional performance at an exceptional price. Frequency Accuracy The local oscillator system in the 2395A is fully synthesized thus providing accurate frequency measurements with 1 Hz resolution. Portability With a weight of only 12 kg (26.5 lbs) the 2395A is one of the lightest microwave spectrum analyzers available. A truly portable unit! Color Display The 6.4 inch TFT color LCD in the 2395A provides a clear, bright, sharp display with a 640 x 480 pixel active display area viewable in high ambient light conditions. Comprehensive Marker System Marker Table The marker system allows up to a maximum of 9 markers to be dis- played on the screen at any one time. A marker table shows the fre- quency and level of each marker selected thus allowing multiple sig- nals to be evaluated simultaneously. In addition to the Normal mark- ers 2395A provides Delta, Peak Search, Peak T rack, 1/Delta, Marker T rack, Marker to Center, and Marker to Reference capabilities. Measurement Limits The Limits facility allows an Upper and/or a Lower Limit to be set on the screen of the 2395A. Should the signal being displayed fall

outside either limit a message will appear on the screen showing which limit has been exceeded and how many times this has happened. Wide Signal Measurement Range The 50 Ohm input on the 2395A can accept signals between +30 dBm and -110 dBm while providing protection to ±50 VDC. Semi-Automated Measurements The MMI on the 2395A has been designed to simplify many of the measurements required for the evaluation of today’s sophisticated communications systems. These include Adjacent Channel Power, X dB Down, Occupied Bandwidth, Channel Power and Harmonic Distortion. Tune Function Use of this function allows an unknown signal to be quickly captured and displayed on the screen. The 2395A will search its complete frequency range for the highest level signal, capture it, display it in the center of the screen with both the span and resolution bandwidths being automatically set to the optimal state for best viewing. Spectral Purity The phase noise on the 2395A is specified at -90 dBc at 10 kHz offset which allows its use for evaluating the spectral purity and noise performance of systems and sub-systems. Signal Demodulation Demodulation of both AM and FM signals allows full testing on a wide range of communications systems. The demodulated signal can be viewed on the screen and is also available on the internal loudspeaker and on headphones via a connector on the front panel. The FM peak deviation and AM modulation depth can be measured using the markers provided in the 2395A. Information Storage The 2395A is provided with the capability of internally storing up to 1,000 screen traces and 2,000 operational states. The spectrum analyzer is also fitted with a USB 2.0 interface for download to bulk storage. Input Connector The 2395A input connector is a Planar Crown ® adapter and both type N and PC 2.92 mm adapters are supplied. The PC 2.92 mm is required for operation to 26.5 GHz and input specifications are meas- ured with this adapter fitted. The type N adapter can be used for operation up to 18 GHz or where low frequency operation in a type N cable system demands the appropriate connector. ® Planar Crown is a trade mark of Weinschel Corporation. Interfaces IEEE 488-2, RS-232 and Printer (PCL5) interfaces are provided as standard on the 2395A allowing its integration into automated test systems and the print-out of screen displays. The 2395A has been designed with future flexibility and expansion in mind. The operating system and system memory has the capability to have additional facilities incorporated. X dB Down Occupied Bandwidth Channel Power

For the very latest specifications visit www.aeroflex.com Harmonic Distortion SSPPEECCIIFFIICCAATTIIOONN FFRREEQQUUEENNCCYY Tuning Range 9 kHz to 26.5 GHz Range Band Mixing Mode 9 kHz to 3 GHz 0 1 2.9 to 6.4 GHz 1 1 6.3 to 13 GHz 2 2 12.9 to 26.5 GHz 3 4 Resolution 1 Hz Frequency Span Width

100 Hz/div to 2000 MHz/div in 1, 2, 5 step selections (auto-selected)

Zero span and Full span (9 kHz to 26.5 GHz) Manual selection of Start, Stop and Span Span Accuracy <±3% of indicated span width Readout Accuracy ± (Span Accuracy + Frequency Standard Accuracy + 50% of RBW) Stability Residual FM ≤100 x N Hz p-p at 1 kHz RBW, 1 kHz VBW (p-p in 200 ms) Noise Sidebands <-90 +20 LogN dBc/Hz where N is mixing mode shown in frequency table (previous page) FFRREEQQUUEENNCCYY CCOOUUNNTTEERR Resolution

1 Hz, 10 Hz, 100 Hz and 1 kHz

±(Reference frequency error + frequency readout accuracy + counter resolution ±1 count) Sensitivity <-70 dBm from 50 kHz to 26.5 GHz AAMMPPLLIITTUUDDEE Measurement Range +30 dBm to -110 dBm DANL 50 kHz to 100 kHz <-105 dBm, typically -105 dBm 100 kHz to 2.8 GHz <-110 dBm, typically -110 dBm 2.8 GHz to 3.0 GHz <-95 dBm, typically -105 dBm 3.0 GHz to 13.2 GHz <-110 dBm, typically -115 dBm 13.2 GHz to 26.5 GHz <-100 dBm

300 Hz RBW, 10 Hz VBW

-10 dBm, 100 kHz to 26.5 GHz at 0 dB attenuation Displayed Range 100 dB in 10 dB/div log scale 50 dB in 5 dB/div log scale 20 dB in 2 dB/div log scale 10 dB in 1 dB/div log scale 10 divisions with linear amplitude scale Amplitude Units Log scale mode dBm and dBmV. Linear scale mode V (µV, mV, etc.) or dBV (dBmV only). Quasi Peak mode dBµV, dBmV or dBm Display Linearity 5 and 10 dB/div, ±0.1 dB/dB, ±1.0 dB over 10 divisions 1 and 2 dB/div, ±0.5 dB over 10 divisions Linear, ±10 % of Reference Level over 10 divisions Frequency Response Flatness 9 kHz to 5 MHz -3 dB to +1 dB 5 MHz to 2.9 GHz ≤±1.0 dB 2.9 GHz to 6.4 GHz <±1.5 dB 6.4 GHz to 13.2 GHz <±2.2 dB 13.2 GHz to 26.5 GHz <±3.0 dB Measured with 10 dB of input attenuation at 23°C ±3°C AATTTTEENNUUAATTOORR Range 0 dB to 55 dB in 5 dB steps selected manually or automatically coupled to the Reference Level Accuracy ±0.5 dB/step up to ± 1.0 dB maximum RREEFFEERREENNCCEE LLEEVVEELL Range -110 dBm to +30 dBm with 1 kHz filter using 1 dB/div scale Accuracy ±1.0 dB (50 kHz to 26.5 GHz) Resolution 0.1 dB steps Residual Spurious -85 dBm (input terminated, 0 dB attenuation) Harmonic Distortion -60 dBc (-40 dBm input at 0 dB attenuation)

Intermodulation Distortion -70 dBc 100 MHz to 26.5 GHz -65 dBc 1 MHz to 100 MHz (at -30 dBm input, 0 dB input attenuation) Other Spurious -60 dBc (10 MHz to 26.5 GHz at -30 dBm input) RREESSOOLLUUTTIIOONN BBAANNDDWWIIDDTTHH Selection

300 Hz, 1 kHz, 3 kHz, 10 kHz, 30 kHz, 100 kHz, 300 kHz, 1 MHz,

3 MHz

9 kHz and 120 kHz (Quasi-Peak Detector Option)

100 Hz, 30 Hz, 10 Hz (Digital Resolution Bandwidth Option)

±20% Selectivity -60 dB/3 dB ratio <15:1 except 3 MHz filter 50 dB/3 dB ratio <15:1, 60 dB/6 dB ratio <12:1 for 9 kHz and 120 kHz Quasi Peak filters RBW Switching Error <±1.0 dB referred to 3 kHz resolution bandwidth Video Bandwidth

1 Hz to 1 MHz in 1-3-10 sequence plus full BW

Rate (full screen) 20 ms to 1000 s in 1-2-5 sequence, 25 µs to 100 s in Zero Span Sweep Rate Accuracy <±20% for <100 ms, ±10 % for all other sweep rates Trigger Source External, Line, Video, Free run Trigger Modes Continuous, Single Trigger Level Internal Trigger: Adjustable over 10 divisions External Trigger (Rear): TTL Level Trigger Delay ± One sweep time DDIISSPPLLAAYY Type 6.4 in. TFT Color LCD Digital Resolution

640 H x 480 V active display area

Up to 9 colored Markers available plus Delta Marker Modes Normal, Delta, Peak Search, Peak Track, 1/Delta, Marker Track, Marker to Center, Marker to Reference, All Markers to peak Marker Marker Track, Marker to Center, Marker to Reference, Marker to Peak MMEEMMOORRYY Trace storage Up to 1,000 stored traces stored internally Setup Storage Up to 2,000 operational states stored internally External USB 2.0 interface for bulk storage (USB 1.1 compatible) Display Traces 2 max IINNPPUUTTSS RF Input

50 Ohm Planar Crown® connector

Supplied with Type (N) and PC 2.92 mm (f) adapters Input VSWR (9 kHz - 26.5 GHz) ≤1.5 : 1 with 10 dB Input Attenuation, with 2.92 mm female adapter Maximum Input +30 dBm with 10 dB attenuation, 50 VDC LO Emissions -70 dBm with 0 dB attenuation OOUUTTPPUUTTSS IF Output

10.7 MHz nominal

0 to 5 VDC, VGA output Printer Drivers PCL5 compatible via standard 25 pin female D-Sub Parallel Printer Probe Power +15 V, -12 V and Ground Cal Signal 20 MHz, -20 dBm ±0.3 dB from front panel BNC connector FFRREEQQUUEENNCCYY SSTTAANNDDAARRDD Frequency

10 MHz

+5 dBm nominal Temperature Stability <±2 ppm

For the very latest specifications visit www.aeroflex.com Aging Rate <±1 ppm/year Connector BNC female External Input -5 dBm to +15 dBm IINNTTEERRFFAACCEESS GPIB Conforms to IEEE 488.1 – 1987, 488.2 – 1992 Subsets SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, C0, LE0, TE0 RS-232C Full Duplex Baud Rate 110 bps, 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19.2 kbps, 38.4 kbps, 57.6 kbps, 115.2 kbps Parity Check Odd, Even or None Data Length 7 bit or 8 bit selectable Stop Bits 1 bit or 2 bit Protocol None, Xon-Xoff, RTS-CTS, DTR-DSR EENNVVIIRROONNMMEENNTTAALL Operating 0 to 40°C Storage -20 to +60°C Temperature & Humidity Meets MIL-T-28800E for Type 2, Class 5, non-condensing (85% oper- ating, 90 % storage) Vibration/Shock Meets MIL-T-28800E for Type 2, Class 5 Altitude Operational up to 3,000 meters, non-operational to 12,200 meters PPRROODDUUCCTT SSAAFFEETTYY Conforms to EN61010-1 for Class 1 portable equipment and is for use in a pollution degree 2 environment. The instrument is designed to operate from an Installation Category II. EELLEECCTTRROOMMAAGGNNEETTIICC CCOOMMPPAATTAABBIILLIITTYY Complies with the limits specified in the following standard: EN61326 GGEENNEERRAALL CCHHAARRAACCTTEERRIISSTTIICCSS DIMENSIONS including handle Weight <12 kg/26.5 lbs (without options) Warm-up Time 15 minutes for specified accuracy PPOOWWEERR RREEQQUUIIRREEMMEENNTTSS Voltage 90 to 250 VAC ±10 % Frequency 50-60 Hz Power Consumption

100 W max without options fitted

HHAARRDDWWAARREE OOPPTTIIOONNSS HHiigghh SSttaabbiilliittyy TTiimmeebbaassee ((OOppttiioonn 0033)) Temperature Stability <±0.2 ppm Ageing Rate <±0.1 ppm/year QQuuaassii--PPeeaakk DDeetteeccttoorr ((OOppttiioonn 0044)) Quasi-Peak detector and EMC filters RBW 9 kHz Band B 120 kHz Band C Frequency Range 150 kHz to 30 MHz 30 MHz to 1 GHz Charge Time (ms) 1 ±20% 1 ±20% Discharge Time (ms) 160 ±20% 550 ±20% Display Time (ms) 160 ±20% 100 ±20% DDiiggiittaall RReessoolluuttiioonn BBaannddwwiiddtthh FFiilltteerrss ((OOppttiioonn 0055)) Bandwidths

100 Hz, 30 Hz, 10 Hz

±20% Selectivity (-60 dB/-3 dB) <5:1 Maximum span

1 MHz

Sweep times for 10 kHz span RBW 100 Hz <0.9 sec

30 Hz <3 sec

10 Hz <4.5 sec Displayed Average Noise Levels (DANL) between 1 MHz and 13 GHz reduces DANL by typically 5 dB from the values in the 300 Hz resolution bandwidth filter.

SSOOFFTTWWAARREE OOPPTTIIOONNSS OOppttiioonn 1122 -- MMaarrkkeerr LLaabbeell EEddiitt This software option allows the user to change the marker label from the normal numeric format to a user defined 4-digit alpha-numeric label. OOppttiioonn 1133 -- EEMMCC This software option, which must be used in conjunction with Option 04 (Quasi-peak detectors and filters) provides the user with some of the facilities required for EMC pre-compliance testing. Features include: Entry of correction factors for: Test Antenna Cable loss Transducer characteristics Addition of limit lines Choice of Log or Linear frequency scales Semi-automated operation of quasi-peak functions VVEERRSSIIOONNSS,, OOPPTTIIOONNSS AANNDD AACCCCEESSSSOORRIIEESS When ordering please quote the full ordering number information. Ordering Numbers Versions 2395A/0 9 kHz to 26.5 GHz Spectrum Analyzer Options

03 High stability timebase

04 Quasi-peak detectors and filters

05 Digital resolution bandwidth filters

06 AC/DC power supply

12 Marker label edit software

13 EMC software

2 x 250 V , 3.15 A fuses 3.5 mm (f) and type (N) Planar Crown ® adapters

80010 Soft carry case

For the very latest specifications visit www.aeroflex.com

Part No. 46891/149, Issue 5, 03/07 CHINA Beijing Tel: [+86] (10) 6539 1 166 Fax: [+86] (10) 6539 1778 CHINA Shanghai Tel: [+86] (21) 5109 5128 Fax: [+86] (21) 5150 61 12 FINLAND Tel: [+358] (9) 2709 5541 Fax: [+358] (9) 804 2441 FRANCE Tel: [+33] 1 60 79 96 00 Fax: [+33] 1 60 77 69 22 GERMANY Tel: [+49] 8131 2926-0 Fax: [+49] 8131 2926-130 HONG KONG Tel: [+852] 2832 7988 Fax: [+852] 2834 5364 INDIA Tel: [+91] 80 51 15 4501 Fax: [+91] 80 51 15 4502 KOREA Tel: [+82] (2) 3424 2719 Fax: [+82] (2) 3424 8620 SCANDINAVIA Tel: [+45] 9614 0045 Fax: [+45] 9614 0047 SPAIN Tel: [+34] (91) 640 1 1 34 Fax: [+34] (91) 640 06 40 UK Burnham Tel: [+44] (0) 1628 604455 Fax: [+44] (0) 1628 662017 UK Cambridge Tel: [+44] (0) 1763 262277 Fax: [+44] (0) 1763 285353 UK Stevenage Tel: [+44] (0) 1438 742200 Fax: [+44] (0) 1438 727601 Freephone: 0800 282388 USA Tel: [+1] (316) 522 4981 Fax: [+1] (316) 522 1360 Toll Free: 800 835 2352 www.aeroflex.com info-test@aeroflex.com As we are always seeking to improve our products, the information in this document gives only a general indication of the product capacity, performance and suitability, none of which shall form part of any con- tract. We reserve the right to make design changes without notice. All trademarks are acknowledged. Parent company Aeroflex, Inc. ©Aeroflex 2006.