2380

2380 BURKERT | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 16

Technical content

Visit product website  DATA SHEET Type 8696  Digital electropneu- matic positioner for the integrated mounting on process control valves Type 8694  Digital electropneu- matic positioner for the integrated mounting on process control valves Type 8692  Digital electropneu- matic Positioner for the integrated mounting on process control valves Type 8693  Digital electropneumat- ic process controller for the integrated mounting on process control valves 1000274158 | Standard | EU | en | 202109 | 03 2/2-way Bellow Control Valve

• For neutral and aggressive media
• Media separation by PTFE bellow
• Hygienic design The bellow control valve is a pneumatically operated process valve with a single-acting diaphragm actuator. A PTFE bellow ensures the separation be- tween medium and actuator. The materials used and the design of the media space allow the use under hygienic or aggressive conditions. It has a good cleanability. The combination with a controller (Type 869x) and the control cone integrated into the bellow enable the valve to handle demanding control tasks. The space-saving actuator with low internal volume not only results in a very compact size but also in remarkably low response times. The valve is characterized by a good control performance due to the low-friction design and has a linear characteristic. A certain variety of body and block system solutions are deliverable. Product variants described in the data sheet may differ from the product presentation and description. Type descriptionCan be combined with Type 2380 © Christian Bürkert GmbH & Co. KG, Subject to alteration System example Customer specific block variant

2 | 13 Visit product website  Table of contents 1. Gener al technical data 3 P roduct versions Pressure control unit, Type 8880 Function diagram 3. Cir cuit functions 5 Materials 4.2. Material specifications 5. Dimensions 6 6. Performance specifications 7 Flow r ate characteristics 7. Product installation 8 7.2. L eakage detection bores 8. P roduct accessories 9 Networking and combination with other Bürk ert products 10. Or dering information 12 10.2. Bürkert product filter 10.3. Bürk ert product enquiry form 10.4. Or dering chart accessories Spare part set

3 | 13 Visit product website  1. Gener al technical data Product properties Dimensions Detailed information can be found in chapter “5. Dimensions” on page 6. Material Medium contact Body Stainless steel 316L ASME BPE (1.4435 BN2) Bellows Advanced PTFE No medium contact Seal EPDM, FKM Controller PPS, stainless steel Actuator 304 (1.4301) or CF- 8 (1.4308) S tandard surface quality Threaded connection Ra 1.6 µm Weld and clamp connections Internal mechanically polished Ra 0.6 µm Internal electrically polished Ra 0.38 µm Performance data K VS value 0.05…1.8 m3/h Seat leakage < 0.01 of full flow capacity (ANSI Class IV) Pilot pressure (max.) 5.5…7 bar(g) Reaction/switching time Typical settling time < 1 sec. Electrical data Electrical char acteristics Defined by the use of Type 869x Electrical signal/communication Analogue standard signal (e.g. 4…20 mA) Bus communication (e.g. Ethernet/IP, büS) (depending on Type 869x) Medium data Medium Gases and fluids (ultra-pure, sterile, dirty, aggressive, abrasive or also highly viscous); S team (for sterilisation). Medium temperature 0…+ °C (- °C…+ 150 °C for r estricted operating conditions1.)) Medium pressure Vacuum up to 6 bar(g) Control medium Air or neutral gases (DIN ISO 8573 1: Dust Q.-Kl. 7, W ater Q.-Kl. 3, Oil Q.-Kl. X) Process/Port connection & communication Nominal diameter DN4…DN15 Nominal seat size DN1.5…DN10 Port connection Threaded connection G (DIN EN ISO 228 W elded connection DIN 11850 series 0 DIN 11866 R. A / DIN 11850 R. 2 DIN 11866 R. B / DIN ISO 4200 DIN 11866 R. C / ASME BPE Clamp connection On request Pilot air ports Thread G Electrical connection Circular connectors (Multipole) / Cable gland (depending on Type 869x) Approvals and certificates Conformity CE acc. to EG declaration of conformity (2014/30/EU EMC) FDA EG regulation no. 1935/2004 Certificates United States Pharmacopeia (USP) Class VI – 121 Appr ovals ATEX II Cat. 3 G/D (on request) Environment and installation Installation position See “7. Product installation” on page Ambient temperature - 10…+ Degr ee of protection IP65/67 acc. to EN 60529 1.) Medium pressure max. 4 bar (g) up to 134 °C: max. 60 min, ambient temperature max. up to 150 °C: max. 30 min, ambient temperature max.

4 | 13 Visit product website  2. P roduct versions 2.1. Example of a syst em solution Pressure control unit, Type 8880 The pressure control unit controls the gas pressure cushion in the liquid tanks. Block solution with: - Actuator NC (Type 8696) - Actuator NO (Type 8693) - Pressure sensor Type 8693 Type 8696 Pressure sensor Function diagram

5 | 13 Visit product website  3. Cir cuit functions Control function Description 2 (A) 1 (P) CF: A, pneumatically operated control valve 2/2 way Flow direction above seat Normally closed by spring force 2 (B) 1 (P) CF: B, pneumatically operated control valve 2/2 way Flow direction above seat Normally open by spring force 4. Mat erials 4.1. Chemical Resistance Char t – Bürkert resistApp Bürkert resistApp – Chemical Resistance Chart You want to ensure the reliability and durability of the materials in your individual application case? V erify your combination of media and materials on our website or in our resistApp. Start Chemical Resistance Check 4.2. Mat erial specifications No. Element Material

1 Cover Polycarbonate

2 Seals EPDM

3 Outer casing Stainless steel

4 Seals EPDM

5 Basic positioner body PPS

6 Plug connector M12 Stainless steel

7 Threaded connection Stainless steel

8 All screws in positioner Stainless steel

9 Actuator 1.4301/1.4308 recommended flow direction No. Element Material

1 Bellows Advanced PTFE

2 Valve body 1.4435 BN2

6 | 13 Visit product website  5. Dimensions 5.1. Combination of contr oller, actuator and valve body Note:

• For more details see the product enquiry form at the end of this document.
• Dimensions in mm 200.5 (8692/8693) Threaded connection DN08 - DN10 160 (8694) B Threaded connection DN1.5 - DN06 110 Clamp connection 100 A Weld end connection 65.4 156.5 (8696) Controller Type 869x and appropriate actuator 46 + 156.5 = 202.5 156.5 46 Combination example: Controller (Typ 8696) Actuator Valve body with port connection Threaded connection B [mm] GM82 G ¼ 36 GM83 G ⅜ 35 GM84 G ½ 33 Nominal diameter (DN) A [mm] 8.0 / 10.0 36

7 | 13 Visit product website  6. P erformance specifications 6.1. Flow char acteristics Flow characteristic and KV value (typical value) Nominal diameter (pipeline) Seat nominal diameter K V value at stroke [m3/h] KVS value [mm] ASME size DN 10 % 20 % 30 % 40 % 50 % 60 % 70 % 80 % 90 % 100 6.35 x 6.35 x 6.35 x 12.7 x 12.7 x 12.7 x x Flow rate characteristics Linear, theoretical setting ratio (KVS/KV) 20:1 100 0 10 20 30 40 50 60 70 80 90 100 KV/KVS [%] Stroke [%]

8 | 13 Visit product website  7. Product installation 7.1. Installation position for self-draining Arrow pointing upwards 7.2. Leakage detection bores 2 x leakage detection M5 bores (second one on the other side)

9 | 13 Visit product website  8. P roduct accessories Process controller TopControl Type 8693 Actuat or size Ø 70/90/130 mm

Description

The intelligent process controller Type 8693 is designed for integrated mounting on pneumatic actuators from the process control valve series Type 23xx/2103 and especially for the require- ments of hygienic process conditions. Using the TUNE-Functions, the process controller and positioner can be initialized automatically. Easy operation and selection of additional software functions as well as parameterization are carried out via the large graphic display and the keypad. Device configuration and parameterization can also be conveniently carried out by the Bürk ert Communicator software tool via a PC interface.

Features

• Contact-free position sensor
• Universal positioning system for single and double-acting actuators
• Ultra dynamic positioning system without air consumption in steady state
• Integrated diagnostic functions for valve monitoring
• Automatic initialization of the positioner and process controller using the TUNE-Function
• Defined safe position in case of electrical or pneumatic auxiliary power failure
• PROFIBUS DP-V1, EtherNet/IP, PROFINET, Modbus TCP, Bürkert system bus (büS)
• Compact and robust hygienic stainless steel design Customer benefits
• Quick and easy commissioning
• Intuitive and simple operation via graphic display with backlight and keypad
• High degree of system availability due to increased actuator service life by means of spring chamber ventilation
• Guaranteed reliability and predictable maintenance through valve monitoring and diagnos- tics
• Easy maintenance and process monitoring

10 | 13 Visit product website  Positioner TopControl Type 8692 Actuat or size Ø 70/90/130 mm The intelligent electropneumatic positioner Type 8692 is designed for integrated attachment to pneumatic actuators of the process control valve series Type 23xx/2103 and especially for the requirements of hygienic process conditions. The positioner can be initialized automatically using the TUNE-Function. Easy operation and the selection of the extensive additional software functions as well as parameterization are carried out via the large graphic display and keypad. The device configuration and parameterization can also be conveniently carried out using the Bürk ert Communicator software tool via a PC interface.

• Contact-free position sensor
• Universal positioning system for single and double-acting actuators
• Ultra dynamic positioning system without air consumption in steady state
• Integrated diagnostic functions for valve monitoring
• Automatic initialization of the positioner by means of the TUNE-Function
• Defined safe position in case of electrical or pneumatic auxiliary power failure
• PROFIBUS DP-V1, EtherNet/IP, PROFINET, Modbus TCP, Bürkert system bus (büS)
• Compact and robust hygienic stainless steel design Customer benefits
• Quick and easy commissioning
• Intuitive and simple operation via graphic display with backlight and touch keypad
• High degree of system availability due to increased actuator service life by means of spring chamber ventilation
• Guaranteed reliability and predictable maintenance through valve monitoring and diagnos- tics Positioner TopControl BASIC Type 8694 Actuat or size Ø 70/90/130 mm

The compact positioner Type 8694/8696 is designed for integrated attachment to pneumatic actuators of the Type 23xx/2103 process control valve series and especially for the require- ments of hygienic process conditions. Operation and parameterization are performed via push buttons and DIP switches. The device configuration and parameterization can also be conven- iently carried out using the Bürkert Communicator software tool via a PC interface. Contact-free position sensor Universal positioning system for single and double-acting actuators Ultra dynamic positioning system without internal control air consumption AS-Interface, IO-Link, Bürkert system bus (büS) (only 8694) Compact and robust hygienic stainless steel design Customer benefits

• Simple and safe commissioning through Teach-In function
• Minimum space requirement in the plant pipework for more flexibility in plant design
• High degree of system availability due to increased actuator service life by means of spring chamber ventilation Type 8696 Actuat or size Ø 50 mm

11 | 13 Visit product website  9. Networking and combination with other Bürk ert products 9.1. Combination possibilities for bellows contr ol valve, Type 2380 The bellow control valve Type 2380 is a combination of a bellow valve and controller Type 869x. The following controllers are eligible:

• A digital electropneumatic basic positioner, Type 8696
• A digital electropneumatic basic positioner, Type 8694
• A digital electropneumatic Positioner Type, 8692
• A digital electropneumatic positioner or process controller, Type 8693 Note:
• For the configuration of further valve systems please use the product enquiry form at the end of this data sheet.
• The controller is included in the Type 2380 and does not need to be ordered separately. Example: Process controller TopControl Positioner TopControl Type 2380 Bellow valve + Type 869x = Type 2380 Type 8693  Digital electr opneumatic process controller for the integrated mount- ing on process control valves Type 8692  Digital electr opneu- matic positioner for the integrated mounting on process control valves Type 8694  Digital electr opneu- matic positioner for the integrated mounting on process control valves Type 8696  Digital electr opneu- matic positioner for the integrated mounting on process control valves Bellows control valve Type 2380 (incl. 8693) Type 2380 (incl. 8692) Type 2380 (incl. 8694) Type 2380 (incl. 8696)

12 | 13 Visit product website  10. Or dering information 10.1. Bürk ert eShop – Easy ordering and quick delivery Bürkert eShop – Easy ordering and fast delivery You want to find your desired Bürkert product or spare part quickly and order dir ectly? Our online shop is available for you 24/7. Sign up and enjoy all the benefits. Order online now 10.2. Bürk ert product filter Bürkert product filter – Get quickly to the right product Y ou want to select products comfortably based on your technical requirements? Use the Bürkert product filter and find suitable articles for your application quickly and easily Try out our product filter 10.3. Bürk ert product enquiry form Bürkert product enquiry form: Would you like to make a specific product enquiry based on your technical requirements? Please use our pr oduct enquiry form at the end of this data sheet. There you will find all the information relevant to your Bürkert contact person that will help us t o process your enquiry in the best possible way. Bürkert specification key: In our product enquiry form you will find a complete explanation of the composition of our specification k ey. You will find our product enquiry form at the end of this data sheet. 10.4. Or dering chart accessories Spare part set Each set contains:

• 1 x O-ring 20 2.5
• 1 x O-ring 52
• 1 x bellows DNx Nominal diameter Article no. DN1.5 759879  DN3 796530  DN4 796531  DN6 796532  DN8 796533  DN10 796534 

Bürkert – Close to You Austria Belgium Czech Republic Denmark Finland France Germany Italy Netherlands Norway Poland Spain Sweden Switzerland Turkey United Kingdom China Hong Kong India Japan Korea Malaysia Philippines Singapore Taiwan South Africa Russia United Arab Emirates Brazil Uruguay Canada USA Australia New Zealand Credits, © and concept: Christian Bürkert GmbH & Co. KG | Photographs: Marc Eggimann Fotografie - 4051 Basel | Scanner GmbH - Werbeagentur Künzelsau -

74653 Künzelsau

www.burkert.com

1 | 3Visit this product area on the website  © Christian Bürkert GmbH & Co. KG, subject to change Product Enquiry Form - Bellow control valve Thank you for your interest in our products! In order to provide you with optimum advice, please fill out the following form and send it to your Bürkert r epresentative or e-mail address: info@burkert.com. All information submitted will of course be kept strictly confidential. Please fill in the required fields! * *Note: The interactive functions of this PDF may be restricted depending on the PDF reader used. Personal Information Company Contact person Customer no. Department Street Postcode / Town Telephone no. Email Delivery Requir ed delivery date Operating data Process medium Medium Fluid S team Gas Flow rate (Q, QN, W)1.) Min Nominal Max Unit T emperature at valve inlet T1 Min Nominal Max Unit P ressure2.) at valve inlet P1 Min Nominal Max Unit P ressure2.) at valve outlet P2 Min Nominal Max Unit S team pressure PV Min Nominal Max Unit Kinematic viscosity ( ν) mm²/s or cS t Dynamic viscosity (η) mP a·s or cP Standard density kg/m³ 1.) Standard unit: Liquid: Q = m³/h | Gas: Q N = Nm³/h | Steam: W = kg/h 2.) Note: Pressure data in bar: Overpressure to atmospheric pressure Approvals / Conformity CE acc. t o EG declaration of conformity FD A conformity EG r egulation no. 1935/2004 USP class VI – 121 °C A TEX II cat. 3 G/D Additional Requirements / Comment

2 | 3Visit this product area on the website  © Christian Bürkert GmbH & Co. KG, subject to change Specification key - Example Note: Key components 1, 2, 9, 10 and 15 marked in blue do not need to be selected and are therefore not listed in the Specification key below. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 V1 16 17 2380 LA N A 10.0 EE VI SA41 0 0 E I 0 0 0 PL02 MP NO17 Specification key Note: Below you will find the Key legend to fill in the fields. Quantity Control type (+ actuator) Control function Nominal diameter [mm] Seal material Body material Connection Power supply Additional inputs/ outputs Communication Approval Variable Codes Electrical connections Surface quality Key No.  3 4 5 6 7 8 11 12 13 14 V1 16 17 Selection  PL02 Comments Key legend Note:

• Other versions on request
• For more information, see the data sheet Key no. 3: Control type (+ actuator) N Type 8696 L Type 8694 I Type 8692 J Type 8693 Key no. 4: Control function A NC - normally closed B NO - normally open Key no. 5: Nominal diameter [mm] 1.5 8.0 3.0 10.0 4.0 0000 1.) 6.0 1.) Without bellows for devices without body Key no. 6: Seal material

00 Without bellow for devices without valve body

Key no. 7: Body material 00 F or devices without valve body VI 1.4435 BN2 Others on request Key no. 8: Connection Listed in detail below Key no. 11: Power supply E 24 V DC

3 Via Bus

Key no. 12: Additional inputs/outputs

0 No additional inputs/outputs (only for bus communication)

I 1 binary input + 1 analogue output F 1 binary input + 1 analogue output + 2 Binary outputs (only for Types 8692 and 8693) K 16-bit feedback via bus (only AS-i) Key no. 13: Communication

0 No bus communication J Profinet

(62 slaves, analogue profile) K Modbus TCP G büS Q IO-Link I EtherNet/IP Y Profibus DP-V1 Key no. 14: Approval

0 Without

1 With (select the appropriate variable code)

3 | 3Visit this product area on the website  © Christian Bürkert GmbH & Co. KG, subject to change Key no. V1: Variable codes Note: Select all required features PL02 Suitable for foodstuffs (conformity with FDA and EG regulation 1935/2004) MK04 Cust omised software setting PX03 With approval certification for ATEX II GD Others on request Key no. 16: Electrical connections KD With cable gland (not for Type 8696 and not for bus communi- cation) MP With multipole circular plug M12 (not for Type 8694 with AS-i) SK Flat cable clip with 1 m cable (only for AS-i) Key no. 17: Surface quality NO13 W ithout surface finishing (Ra 1.6 μm) NO17 Internal electrically polished (Ra 0.38 μm for weld end) NO23 Internal mechanically polished (Ra 0.6 μm for weld end) Key no. 8: Connection Note: 0000 Code for units without body; other connections (e.g. clamp) connection sizes on request Seat nominal diameter Threaded connection Welded connection DIN ISO 228-1 DIN 11850 R. 0 DIN 11866 R. A / DIN 11850 R. 2 DIN 11866 R. B / ISO 4200 DIN 11866 R. C / ASME BPE DN 1.5 DN 3 DN 4 GM82 G ¼ SC40 6.0 x 1.0 SC41 8.0 x 1.0 SD40 13.0 x

1.5 SA78

10.2 x

1.6 SA90

¼" (6.35 x 0.89) SA91 (9.53 x 0.89) SA92 ½" (12.7 x 1.65) DN 6 GM83 G ⅜ SC41 8.0 x

1.0 SD40

13.0 x 10.2 x 1.6 SA40 13.5 x 1.6 SA91 (9.53 x 0.89) SA92 ½" (12.7 x 1.65) DN 8 DN 10 GM83 G ⅜ GM84 G ½ SC42 10.0 x 1.0 (only DN 8) SD40 13.0 x 1.5 SD42 19.0 x 1.5 SA40 13.5 x 1.6 SA41 17.2 x 1.6 SA92 ½" (12.7 x 1.65) SA93 ¾" (19.05 x 1.65)