20SVP27M

10SVP330M SANYO | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

˙Dimensions E12 F12 φD±0.5 4.0 5.0 6.3 8.0 10.0 8.0 10.0 W±0.2 5.4 5.9 5.9 6.9 7.9 11.9 12.6 4.3 5.3 6.6 8.3 10.3 8.3 10.3 H±0.2 4.3 5.3 6.6 8.3 10.3 8.3 10.3 C±0.2 5.0 6.0 7.3 9.0 11.0 9.0 11.0 R 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.8 to 1.1 0.8 to 1.1 P±0.2 1.0 1.4 2.1 3.2 4.6 3.2 4.6 Size Code (unit : mm) ˙Size List 3.3 4.7 6.8 100 120 150 180 220 270 330 470 560 680 820 1200 1500 E12 F12 RV ʢSVʣµF 2.5 ʢ3.3ʣ ʢ5.2ʣ 6.3 ʢ8.2ʣ ʢ11.5ʣ ʢ18.4ʣ ʢ23.0ʣ ʢ25.0ʣ C6,E7 E12 F12 E7,F8 F8,E12 F12 E7,F8 F8,E12 F12 F8,E12 F12 E12 F12 E12 F12 RV : Rated voltage (SV) : Surge (room temperature) ˞For the minimum packing quantity, please refer to page 55. Standard SMD type product Use for surface mounted type switching power supplies. This product can support lead free-reflow. (˞2). Marking : Polarity( ), Rated voltage, Lot.No. (Purple) SVP(Upper E7), Rated capacitance.˙Specifications ˞1 In case of some problems for measured values, measure after applying rated voltage for 2.5 to 20V products or 20V for 25V products ɹɹfor 120 minutes at 105°C . ˞2 Refer to Page 56 for reflow soldering conditions. 4QFDJGJDBUJPOTGPS FBDITFSJFT 4. SPECIFICATIONS FOR EACH SERIES φD L P R C W 0.2max. H ʢʴʣ ˙Recommended land pattern dimension of PWB c a b Size Code E12 F12 ab c 1.0 1.4 2.1 2.8 4.3 2.8 4.3 6.2 7.4 9.1 11.1 13.1 11.1 13.1 1.6 1.6 1.6 1.9 1.9 1.9 1.9 VOJUNN Conductive polymer type SVPSeries Standard SMD type L+0.1 -0.4 Items Characteristics -55°C to +105°C M: ±20% Less than or equal to the value of Table7 Less than or equal to the value of Table7 Less than or equal to the value of Table7 Within ±20% 1.5 times or less than an initial standard 1.5 times or less than an initial standard Below an initial standard Within ±20% 1.5 times or less than an initial standard 1.5 times or less than an initial standard Below an initial standard (after voltage processing) Within ±10% 1.3 times or less than an initial standard 1.3 times or less than an initial standard Below an initial standard (after voltage processing) Category temperature range Tolerance on rated capacitance Tangent of loss angle Leakage current ESR Endurance Damp heat (Steady state) Characteristics of impedance ratio at high temp. and low temp. -55°C +105°C ∆C/C tanδ ESR Leakage current ∆C/C tanδ ESR Leakage current ∆C/C tanδ ESR Leakage current Resistance to soldering heat Z / Z 20°C Z / Z 20°C 0.75 to 1.25 0.75 to 1.25 120Hz 120Hz 105°C, 2,000h, Rated voltage applied (25V→20V applied) 60°C, 90 to 95%RH, 1,000h, No-applied voltage (VPS) (230°C X 75s) Conditions Based the value at 100KHzɼ+20°C After 2 minutes

˞ Capacitance tolerance : M ±20% ˞2 After 2 minutes ˞3 The surge voltage of 25V products is 25V. Please consider SVPD series 25V products (whose surge voltage is 29V) in placing a new order. 16SVP3R3M 10SVP4R7M 10SVP6R8M 10SVP10M 10SVP15M 6SVP22M 4SVP33M 20SVP10M 16SVP15M 16SVP22M 10SVP33M 6SVP47M 4SVP39M 4SVP68M 25SVP6R8M 20SVP22M 20SVP27M 16SVP39M 10SVP47M 10SVP56M 6SVP82M 6SVP100M 6SVP120MV 4SVP150MX 2R5SVP220M 25SVP10M 20SVP33M 20SVP47M 16SVP56M 16SVP82M 10SVP120M 10SVP150MX 6SVP220MX 4SVP150M 4SVP330M 25SVP22M 20SVP56M 20SVP68M 16SVP100M 16SVP150M 16SVP180MX 10SVP150M 10SVP270M 10SVP330MX 6SVP220M 6SVP330M 6SVP470MX 4SVP680M 25SVP33M 20SVP100M 16SVP180M 10SVP330M 6SVP470M 4SVP560M 2R5SVP680M 25SVP56M 20SVP150M 16SVP330M 10SVP560M 6SVP820M 4SVP1200M 2R5SVP1500M 6.3 6.3 6.3 6.3 6.3 2.5 6.3 6.3 6.3 6.3 6.3 2.5 6.3 2.5 E12 F12 3.3 4.7 6.8 6.8 100 120 150 220 120 150 220 150 330 100 150 180 150 270 330 220 330 470 680 100 180 330 470 560 680 150 330 560 820 1200 1500 260 240 240 220 200 200 200 120 120 660 670 670 700 740 740 740 1020 1020 1060 1100 1100 1100 1400 1200 1450 1450 1620 1620 1700 1700 1810 2780 1810 2390 1500 1890 1890 1890 2120 2560 2560 2560 2560 2560 2000 2400 2400 2670 3020 3020 3020 3700 3700 3700 3700 3700 3700 2980 3320 3640 3950 4210 4520 4520 3800 4320 4720 5230 5440 5440 5440 0.07 0.08 0.09 0.10 0.10 0.12 0.15 0.10 0.10 0.10 0.12 0.12 0.12 0.12 0.10 0.10 0.10 0.10 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.10 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.10 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.15 0.15 0.15 0.15 0.15 0.15 0.12 0.15 0.15 0.15 0.15 0.18 0.18 26.4 23.5 34.0 50.0 75.0 69.3 66.0 100 120 176 165 148 136 108 125 112 103 126 151 120 110 125 132 188 179 262 240 300 277 120 264 275 224 272 320 480 576 300 540 660 277 416 592 544 413 400 576 660 592 448 340 700 600 792 840 775 960 750 Size Code Part Number ˙Table7 SVP Series Characteristics List Rated Voltage (V) Rated Capacitance (µF) ESR 100kHz to 300kHz (mΩ) (max.) Rated ripple current (mArms) Tangent of loss angle (max.) Leakage current (µA) (max.)˞2 4. SPECIFICATIONS FOR EACH SERIES 4QFDJGJDBUJPOTGPS FBDITFSJFT Frequency coefficient for ripple current Frequency Coefficient 120Hzʽ f ʻ1kHz 0.05 1kHzʽ f ʻ10kHz 0.3 10kHzʽ f ʻ100kHz 0.7 100kHzʽ f ʽ500kHz