20SG2AC-G2AC-P GRAYHILL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Optical and Mechanical Encoders Mechanical Encoders SerieS 20 Concentric Shafts
FeatureS
- Compact mechanical encoder with concentric shafts
- Output Code Choices
- Panel and Shaft Seal Option
- Manufactured to ISO 9001 and Military Standards
- Available with a fixed stop or continuous rotation
- Custom Configurations Available DimenSionS in inches SpeCiFiCationS electrical ratings Switching Loads: 150 mA, 115 Vac 200 mA, 28 Vdc Life expectancy: 25,000 cycles at rated loads Contact resistance: 300 mohms max. (less than 100 mohms initially) insulation resistance: 1000 Mohms min. (10,000 Mohms initially) Dielectric Strength: 500 Vac min. Hardware Dimensions: Lockwasher: .437inch diameter, .022inch thick Hex Nut: 5/16-32 UNEF-2B Thread, .437 inch across flats, .094 inch thick materials and Finishes terminal pins: Phosphor bronze with tin over nickel plating panel Seal: Buna-N rubber, adhesive coated Lockwasher: Spring steel with zinc plating Hex nut: Brass with tin/zinc plating mechanical ratings Stop Strength: 5 in-lbs. rotational torque: 5 in-oz outer shaft 3.5 in-oz inner shaft mounting torque: 12 in-lbs. recommended operating temperature range: -40°C to +85°C Storage temperature range: -55°C to +100°C immersion: 15 psi (33ft) for 30 minutes pin Dimensions: .018 inch square Series 20: Mechanical Encoder, concentric shafts Seal: S = Sealed; A = Not Sealed output code angle of throw (outer shaft) Stop arrangement: AC = all positions continuous rotation; AF = all positions with fixed stop between first and last; 02 to 15: number of positions, if less than maximum termination: P = Pins; 02 to 25 = Cable Length Stop arrangement (see above) angle of throw (inner shaft) output code orDering inFormation (potential combinations) angle of throw / max positions: 2 = 22.5° / 16 positions 0 = 30° / 12 positions 6 = 36° / 10 positions 5 = 45° / 8 positions output Code: G = Gray B = Binary Q = Quadrature 20Sg2a C–g2a C-p