20ACPO GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 3 20ACPO_S – Rev. 2020-1.1 Specifications subject to change without notice. 20ACPO_S Series 20W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated High efficiency up to 80% Universal AC input range (85~264VAC) Ultra-miniature size, low profile Over voltage protection (OVP) Over load protection (OLP) Short circuit protection (SCP) Wide operating ambient temperature (-25°C~70°C) All using 105°C long life electrolytic capacitors 100% full load burn-in test AC-DC Converter 20 Watt The 20ACPO_S series features standard rail mounting, energy efficiency and is highly cost-effective. The series offers stability and high noise immunity especially for industrial control equipment, machinery and other demanding environments for industri al equipment. This converter offers a compact and light weight design with and standard rail installati- on (35mm). Furthermore this series offers Easy Fuse Tripping due and a built-in DC OK relay contact. The converter can be installed on TS-35/7.5 or TS-35/15. Example: 20ACPO_24S 20 = 20Watt AC = AC-DC PO = series 24 = 24 Vout S = single output Input specifications Input voltage range 85Vac~264Vac, 120Vdc~370Vdc Input frequency 47~63Hz AC current 230VAC 3.3V: 0.4A (max) Others: 0.5A (max) Inrush current Cold start @115VAC 20A (typ) @230VAC 40A (typ) Leakage current Input—output: <0.35mA Input—PG: <0.75mA Output specifications Item Test conditions Min Typ Max Units Output voltage accuracy Full load ±2 % Voltage adjustment range

  • 3.3V
  • 5V
  • 12V
  • 15V
  • 24V
  • 48V 3.1 4.4 11.1 13.7 45.6 3.6 5.6 13.1 16.1 25.4 50.4 V V V V V V Line regulation Vin= min. to max. at full load ±0.5 % Load regulation 0% to 100% load ±2 % Set-up time (full load)
  • @230VAC input
  • @115VAC input s s Hold-up time (full load)
  • @230VAC input
  • @115VAC input ms ms Overshoot and undershoot 5 % Switching frequency 65 KHz * Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. Protection specifications Over-load protection 105%~150% rated output power Protection type: Hiccup model, auto recovery Over-voltage protection 110%~140% of rated output voltage Protection type: Constant voltage Common specifications Short circut protection: Long-term mode, automatic recovery Temperature rise at full load: 50°C MAX Cooling: Free air convection Operation temperature range: -25°C~+70°C Storage temperature range: -40°C ~+85°C Storage humidity range: < 95% Temperature coefficient: 0.03%/°C MAX MTBF (using MIL-HDBK-217F): +25°C >200,000 hours Safety standards: UL60950-1; EN60950-1: 2006 Case material: Heat-resistant Plastic (UL94-V0) and metal Dimensions (L*W*H): 89×51×20mm Weight: 126.7g Isolation specifications Item Test condition Min Typ Max Units Withstand voltage* • Primary-Sec.: 10mA
  • Primary-PG: 10mA
  • Secondary-PG: 10mA 3000 1500 500 VAC Isolation resistance 100 MΩ * Input-Output, tested for 1 minute, 500VDC and leakage current less than 1mA Note: 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. UL-60950-1 (E347551)

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 3 20ACPO_S – Rev. 2020-1.1 Specifications subject to change without notice. 20W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated 20ACPO_S Series Mechanical dimensions EMC specifications EMI / Conduction&Radiation Compliance to EN55022 (CISPR22) ClassB EMS / Harmonic current Compliance to EN61000-3-2, 17625.1-2003 EMS / Immunity Compliance to EN61000-4-2, -3, -4, -5, -6, -8, -11; ENV50204, light industry level, criteria A The power supply is considered as a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. Approval Model Power [W] Output [Vo, VDC] Rated Current [A] Ripple&Noise* [mV, typ] 0~60°C -20~0°C Efficiency [%, typ] 115VAC 230VAC UL 20ACPO_03S 20 3.3 4 50 75 69 68 UL 20ACPO_05S 20 5 4 50 75 76 75 UL 20ACPO_12S 20 12 1.67 50 75 79 78 UL 20ACPO_15S 20 15 1.34 50 75 80 79 UL 20ACPO_24S 20 24 0.84 50 75 80 79 UL 20ACPO_48S 20 48 0.42 100 100 80 79 Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 3 20ACPO_S – Rev. 2020-1.1 Specifications subject to change without notice. 20W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated 20ACPO_S Series Typical characteristics Functional block diagram Derating Curve AMBIENT TEMPERATURE (°C) LOAD (%) Functional diagram