20ACE GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 5 20ACE_4 – Rev. 2020-1.2 Specifications subject to change without notice. Approval (pending) Model Power [W] Output Voltage [V] Output current [mA, max] Efficiency [230VAC; %, typ] Capacitive load [µF, max] UL/CE/CB 20ACE_03S4 11.88 3.3 3600 74 10000 UL/CE/CB 20ACE_05S4 18 5.1 3600 78 6600 UL/CE/CB 20ACE_09S4 20 9 2200 79 4400 UL/CE/CB 20ACE_12S4 20 12 1660 82 3000 UL/CE/CB 20ACE_15S4 20 15 1330 83 2000 UL/CE/CB 20ACE_24S4 20 24 833 83 800 Note: Add suffix CM for Chassis mounting (f.ex. 20ACE_15S4CM), suffix DR for DIN rail mounting (f.ex. 20ACE_15S4DR) 20ACE_4 series 20W- Single Output AC-DC Converter - Universal Input - Isolated & Regulated Universal input: 85~264VAC/100~370VDC Operating temperature range: -40°C to +70°C High efficiency High reliability Isolation up to 4kVAC Output over voltage protection Short circuit protection (SCP) Over current protection Plastic case, meets UL94V-0 EMI performance meets CISPR32 / EN55032 CLASS B Meets IEC62368, UL62368, EN62368 standards (pending) AC-DC Converter 20 Watt The 20ACE_4 Series is a compact size power converter series offered by Gaptec. It features universal input voltage, taking both DC and AC input voltage, low power consumption, high efficiency, high reliability, safer isolation. It offers good EMC performance, and is UL & CE certified, and widely used in industrial, electricity, instruments, telecommunication and civil applications. Output specifications Voltage accuracy • 3.3V output: ±3%

  • Others: ±2% Minimum load 0% Line regulation (full load) ±0.5% (typ) Load regulation (0% to 100%) ±1% (typ) Ripple & Noise (20MHz bandwidth, peak-peak value) 50mV (typ); 120mV (max) Short circuit protection Hiccup, indefinite, auto-recovery Over current protection ≥110% Io, self-recovery Over voltage protection • 3.3V/5V output: 7.5V
  • 9V output: 15V
  • 12V/15V output: 20V
  • 24V output: 30V Hold-up time 115VAC input: 5ms (min); 10ms (typ) 230VAC input: 44ms (min); 55ms (typ) Input specifications Input voltage range 85~264VAC, 100~370VDC Input frequency 47~63Hz Input current 115VAC
  • 0.37A (typ)
  • 0.44A (max) 230VAC
  • 0.24A (typ)
  • 0.26A (max) Inrush current 115VAC
  • 12A (typ) 230VAC
  • 36A (typ) Recommended external input fuse 3.15A/250V, slow fusing, necessary Hot plug unavailable Example: 20ACE_05S4 20 = 20Watt; AC = AC-DC; E = case style; 5Vout; S = Single Output; 4 = 4kVAC isolation Note: 1. Ripple and Noise tested with “parallel cable” method. 2. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta = 25°C, humidity <75% with nominal input voltage and rated output load; 3. All index testing methods in this datasheet are based on our Company’s corpo- rate standards; 4. We can provide product customization service, please contact our technicians directly for specific information; 5. Products are related to laws and regulations: see „Features“ and „EMC“; 6. Our products shall be classified according to ISO14001 and related environmen- tal laws and regulations, and shall be handled by qualified units. UL-62368-1 (E347551)

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 5 20ACE_4 – Rev. 2020-1.2 Specifications subject to change without notice. 20ACE_4 series 20W- Single Output AC-DC Converter - Universal Input - Isolated & Regulated Common specifications Operating temperature range -40°C ~ +70°C Storage temperature range -40°C ~ +85°C Humidity 95% MAX Temperature coefficient 0.02%/°C Welding temperature • Wave-soldering: 260 ± 5°C; time: 5 - 10s

  • Manual welding: 360 ± 10°C; time: 3 - 5s Switching frequency 100kHz TYP Power derating -40°C to 0°C: 1.67%/°C +40°C to +70°C: 3.3V/5V: 2.66%/°C; others: 2.33%/°C Power derating 85-130VAC, 5V
  • -25°C to +70°C: 0.66%/VAC
  • -40°C to -25°C: 1.33%/VAC 85-100VAC, Others -25°C to +70°C: 2.0%/VAC -40°C to -25°C: 4.0%/VAC 240-264VAC: 0.83%/VAC I/O-isolation voltage 4000VAC/1Min EMC / EMI / CE CISPR32/EN55032, CLASS B EMC / EMI / RE CISPR32/EN55032, CLASS B EMC / EMS / ESD IEC/EN 61000-4-2 Contact ±6KV / Air ±8KV perf. Criteria B EMC / EMS / RS IEC/EN 61000-4-3 10V/m perf. Criteria A EMC / EMS / EFT • IEC/EN 61000-4-4 ± 4kV perf. Criteria B EMC / EMS / Surge • IEC/EN 61000-4-5 line to line ±2KV perf. Criteria B
  • IEC/EN 61000-4-5 line to line ±4KV/line to ground ±6KV perf. Criteria B (see EMC solution recommended circuit) EMC / EMS / CS IEC/EN61000-4-6 10 Vr.m.s perf. Criteria A EMC / EMS / Voltage dips, short and interruptions immunity IEC/EN61000-4-11 0%-70% perf. Criteria B Safety standard IEC62368/EN62368/UL62368 Safety regulation certification IEC62368/EN62368/UL62368 (Pending) Safety class CLASS II Case material UL94V-0 Install PCB, chassis, Din rail mounting MTBF >300,000h @25°C (MIL-HDBK-217F) Cooling method Free air convection Weight 60g / 80g (chassis mounting) / 100g (Din rail mounting) Efficiency 20ACE_24S4 20ACE_15S4 20ACE_05S4 20ACE_24S4 20ACE_15S4 20ACE_05S4

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 5 20ACE_4 – Rev. 2020-1.2 Specifications subject to change without notice. 20ACE_4 series 20W- Single Output AC-DC Converter - Universal Input - Isolated & Regulated Typical characteristics Typical application circuit Model FUSE MOV C1 C2 TVS 20ACE_03S4 3.15A/250V, slow fusing, necessary S20K300 1μF/50V 220μF/16V SMBJ7.0A 20ACE_05S4 220μF/16V SMBJ7.0A 20ACE_09S4 120μF/25V SMBJ12A 20ACE_12S4 120μF/25V SMBJ20A 20ACE_15S4 120μF/25V SMBJ20A 20ACE_24S4 68μF/35V SMBJ30A Model FUSE 20ACE_03S4 470μF/16V (Solid capacitor) 20ACE_05S4 470μF/16V (Solid capacitor) 20ACE_09S4 470μF/16V (Solid capacitor) 20ACE_12S4 390μF/25V 20ACE_15S4 390μF/25V 20ACE_24S4 220μF/35V Note: 1. Output filtering capacitor C2 is electrolytic capacitor, it is recommended to apply electrolytic capaci- tor with high frequency and low resistance. For capacitance and current of capacitor please refer to manufacture’s datasheet. Capacitor voltage reduced to at least 80%. C1 is ceramic capacitor, which is used to filter high-frequency noise. TVS is a recommended component to protect post-circuits if converter fails. 2. The product in the application must connect external electrolytic capacitors C2, to achieve lower ripple noise and better dynamic load performance. 3. When the product’s output terminal is connected to high frequency switch type load, electrolytic capacitor C2’s selection is as shown in table 2. Table 1 Table 2

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 4 of 5 20ACE_4 – Rev. 2020-1.2 Specifications subject to change without notice. 20ACE_4 series 20W- Single Output AC-DC Converter - Universal Input - Isolated & Regulated Mechanical dimensions EMC solution-recommended circuit

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 5 of 5 20ACE_4 – Rev. 2020-1.2 Specifications subject to change without notice. 20ACE_4 series 20W- Single Output AC-DC Converter - Universal Input - Isolated & Regulated Din rail mounting Chassis mounting