20100-1 RHOPOINT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
P R E C I S I O N I N E L E C T R O N I C S © Rhopoint Components Ltd, Hurst Green, Oxted, Surrey, RH8 9AX, UK T +44 (0) 870 608 1188 sales@rhopointcomponents.com www.rhopointcomponents.com TECHNICAL DATASHEET TEMPERATURE SENSORS
- Response time down to 1mS (grounded)
- Low mass giving low thermal inertia (butt bonded construction)
- Flexible will bond to flat or curved surfaces
- May be used with any standard readout equipment Butt bonded thermocouples 20100 series These thermocouples have their free filament supported on a temporary polyimide film carrier. This is a tough, flexible and dimensionally stable material rated at 260˚C continuous. During installation the carrier can be peeled from the sensor or released by the application of heat, alternatively parts of the carrier may be cut away with scissors or a knife. Designed primarily for application with ceramic cements. The free foil thermocouple can be easily brushed into a thin layer of cement following application and drying of a thin insulating layer if an ungrounded junction is required. Dimensions in mm 20100-1 Type K 0.005 0.025 x 0.76 -160 to +815 20100-2 Type K 0.013 0.05 x 0.76 -160 to +815 20101-1 Type E 0.005 0.025 x 0.76 -160 to +650 20102-2 Type T 0.013 0.05 x 0.76 -160 to +370 Part Thermocouple Foil Leads Temperature number type thickness (mm) (mm) range ˚C 20113 Type E 0.013 0.25 -195 to +260 20114 Type T 0.013 0.25 -195 to +260 Part Thermocouple Foil Leads Temperature number type thickness (mm) (mm) range ˚C