20110 AEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Tilt switches “make” when the electrode is tilted below horizontal and “break” when tilted above the horizontal. Total travel from “make” to “break” is the “Maximum included angle” shown below. The component to which the switch is attached must have a total tilt angle greater than the “Maximum included angle” for proper operation. Part No: 20110 - A1/2 Series Tip Over Switch - Mercury American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana. USA Tel: +1-574-295-6330 Fax: +1-574-293-8013 Email: sales@aecsensors.com http://www.aecsensors.com © American Electronic Components Inc 2006 Drawing dimensions in inches and (millimeters). 20110 220806 Specifications are subject to change without notice. E&OE. Features: * Un-Insulated * Form: NO/SPST/Vertical Mount as shown * Angles Referenced from Vertical * Side Pin 2nd Electrode * Omni-Directional * Hermetically Sealed * Small Package Size * Long Life Must Make / Break Angle : Must make between 45º and 75º from vertical Maximum included Angle: Load dependent Switch Ratings: Max Switching Voltage 12V DC Max Switching Current 10mA Initial Contact Resistance (Max). 10 Ohms Stand Off Voltage (contact to contact) 1kV AC Operating Temperature -38º to 220ºF / -38º to 105ºC Storage Temperature -40º to 356ºF / -40º to 180º C Typical number of operations at specified load 10,000,000 G-Force Activation G-Level/Range N/A Dimensions: Weight per 100pcs. Lbs / Kgs: 0.33 / .015 Body Length (less leads). Inches / millimeters: 0.39 / 9.91 Maximum Diameter. Inches / millimeters: 0.31 / 7.9 Materials: Lead Wire Type N/A Lead wire length/skive/termination N/A Finish: Tin