DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 14
Technical content
© PHOENIX CONTACT 2017 Plug component, Screw connection with tension sleeve Order No.: 1840492 Type: MC 1,5/15-ST-3,5 Data sheet
1 Main features
2 Your advantages
No. of pos. 15 Nominal current 8 A Conductor cross section 1.5 mm² Nominal voltage 160 V Color green Connection direction 0 ° Pitch 3.5 mm Type of packaging packed in cardboard Connection method Screw connection with tension sleeve Well-known connection principle allows worldwide use Low temperature rise, thanks to maximum contact force Allows connection of two conductors Make sure you always use the latest documentation. It can be downloaded at: phoenixcontact.net/product/1840492 2017-12-19 Product version 03 The figure shows a 10-position version of the product Document revision 0
1840492 MC 1,5/15-ST-3,5
REF 1840366 PHOENIX CONTACT 2 / 14 © PHOENIX CONTACT 2017 2017-12-19 Product version 03 Document revision 0 3T a b l e o f c o n t e n t s
REF 1840366 PHOENIX CONTACT 3 / 14 © PHOENIX CONTACT 2017 2017-12-19 Product version 03 Document revision 0 4 3D model in PDF can be acti vated (Acrobat Reader only)
REF 1840366 PHOENIX CONTACT 4 / 14 © PHOENIX CONTACT 2017 2017-12-19 Product version 03 Document revision 0 6D i m e n s i o n s Order No. 1840492 Type MC 1,5/15-ST-3,5 Type of contact Female connector Range of articles MC 1,5/..-ST Pitch 3.5 mm Number of positions 15 Connection method Screw conn ection with tension sleeve Drive form screw head Slotted Screw thread M2 Locking without 5 item properties Conductor cross section, solid 0.14 mm² to 1.5 mm² Conductor cross section, flexible 0.14 mm² to 1.5 mm² Conductor cross section AWG/kcmil 28 to 16 2 conductors with same cross section, solid 0.08 mm² to 0.5 mm² 2 conductors with same cross section, stranded 0.08 mm² to 0.75 mm² Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² to 1.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve 0.25 mm² to 0.5 mm² 2 conductors with same cross section, stranded, with ferrule without plastic sleeve 0.25 mm² to 0.34 mm² 2 conductors with same cross section, stranded, with TWIN ferrules with plastic sleeve 0.5 mm² to 0.5 mm² Cylindrical gauge a x b / diameter 2.4 mm x 1.5 mm / 1.6 mm Stripping length 7 mm
5.1 Connection capacity
Note WEEE/RoHS-compliant, whisker-free acc. to IEC 60068-2-82/JEDEC JESD 201 Contact material Cu alloy Terminal point surface Sn 4 µm ... 8 µm Surface contact area Sn 4 µm ... 8 µm Surface characteristics hot-dip tin-plated
5.2 Material data
Insulating material data Housing Housing Insulating material PA CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Color green (6021) Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2-13 775 Temperature for the ball pressure test according to EN 60695-10-2 125 °C
REF 1840366 PHOENIX CONTACT 5 / 14 © PHOENIX CONTACT 2017 2017-12-19 Product version 03 Document revision 0 Length 16.1 mm Width 52.5 mm Total height 11.1 mm Dimension a 49 mm
6.1 Dimensions for the product
REF 1840366 PHOENIX CONTACT 6 / 14 © PHOENIX CONTACT 2017 2017-12-19 Product version 03 Document revision 0 7S e r i e s d r a w i n g
REF 1840366 PHOENIX CONTACT 7 / 14 © PHOENIX CONTACT 2017 2017-12-19 Product version 03 Document revision 0 Type of packaging p acked in cardboard Pieces per package 50
8 Packaging information
9 Application
Ambient temperature (storage/transport) -40 °C ... 70 °C Ambient temperature (assembly) -5 °C ... 100 °C Ambient temperature (operation) -40 °C (dependent on the derating curve)
9.1 Temperature limit values
REF 1840366 PHOENIX CONTACT 8 / 14 © PHOENIX CONTACT 2017 2017-12-19 Product version 03 Document revision 0
10 Mechanical tests
Specification IEC 61984:2008-10 Visual test Test passed Specification IEC 60512-1-1:2002-02 Dimensional test Test passed Specification IEC 60512-1-2:2002-02 Resistance of marking Test passed Specification IEC 60068-2-70:1995-12 Insertion and withdrawal force Test passed Specification IEC 60512-13-2:2006-02 No. of cycles 25 Insertion strength per pos. approx. 6 N Withdraw strength per pos. approx. 4 N Polarization and coding Test passed Specification IEC 60512-13-5:2006-02 Test force 20 N Contact retention in insert Test passed Specification IEC 60512-15-1:2008-05 Test force per pos. 24.5 N Specification IEC 60999-1:1999-11 Check for damage to conductor or loosening Test passed
10.1 Termination and connection method
Termination and connection method: pull-out test Specification IEC 60999-1:1999-11 Result Test passed Conductor cross section/conductor type/tractive force actual value 0.14 mm² / solid / > 10 N Conductor cross section/conductor type/tractive force actual value 0.14 mm² / stranded / > 10 N Conductor cross section/conductor type/tractive force actual value 1.5 mm² / solid / > 40 N Conductor cross section/conductor type/tractive force actual value 1.5 mm² / stranded / > 40 N
10.2 Pull-out test
REF 1840366 PHOENIX CONTACT 9 / 14 © PHOENIX CONTACT 2017 2017-12-19 Product version 03 Document revision 0 Rated current / conductor cross section 8 A / 1.5 mm² Rated insulation voltage (III/2) 160 V Rated surge voltage (III/2) 2.5 kV Contact resistance 1.3 mΩ Degree of pollution 2
11.1 Electrical data
Specification IEC 60664-1:2007-04 Mains type unearthed mains Insulating material group I Comparative tracking index (IEC 60112:2003-01) CTI 600 Rated insulation voltage 160 V 160 V 320 V Rated surge voltage 2.5 kV 2.5 kV 2.5 kV Degree of pollution 3 2 2 Overvoltage category III III II Minimum clearance case A (inhomogeneous field) 1.5 mm 1.5 mm 1.5 mm Minimum value of the creepage path requirement in acc. with table 2 mm 1.5 mm 1.6 mm
11.2 Air and creepage distances
REF 1840366 PHOENIX CONTACT 10 / 14 © PHOENIX CONTACT 2017 2017-12-19 Product version 03 Document revision 0
12 Current carrying capacity/derating curves
Type: MC 1,5/ 5-ST-3,5 with MCD 1,5/ 5-G3-3,5 P26 THR MAG 88452_1000_en Specification IEC 61984:2008-10 Note Representation based on IEC 60512-5-2:2002-02 Reduction factor 0.8 Number of positions See diagram Conductor cross section 1.5 mm² 100806040200 = 12-pos. = 20-pos. = 5-pos. = 2-pos. Ambient temperature [°C] Current strength [A] 01 0 2 0 304 0 506 0 708 0 90 100 110 /UNIf51e /UNIf51f/UNIf520/UNIf51e=2-pos. /UNIf51f /UNIf520 =5-pos. =12-pos. /UNIf521 /UNIf521=20-pos. Ambient temperature [°C] Current strength 01 0 2 0 304 0 506 0 708 0 90 100 110 /UNIf520/UNIf521 = 2-pos. = 5-pos. = 13-pos./UNIf520 /UNIf521= 24-pos. Ambient temperature [°C] Current strength
REF 1840366 PHOENIX CONTACT 11 / 14 © PHOENIX CONTACT 2017 2017-12-19 Product version 03 Document revision 0
13 Environmental and durability tests
Specification IEC 60068-2-6:2007-12 Result Test passed Frequency 10 - 150 - 10 Hz Sweep speed 1 octave/min Amplitude 0.35 mm (10 - 60.1 Hz) Acceleration 5 g (60.1 - 150 Hz) Test duration per axis 2.5 h Test directions X-, Y- and Z-axis
13.1 Vibration test
Specification IEC 61984:2008-10 Main features Connectors with out switching capacity (COC) Construction form Fixed connectors Strain relief elements w ithout strain relief Connection method Can be reconnected Protection against electric shock Not en capsulated - touch-proof when inserted Protective conductor without PE Lock no Connection method Screw terminal points
14 Classification for connectors
15 Approvals
CSA Use group B D mm²/AWG/kcmil 28-16 28-16 Voltage 300 V 300 V Current 8 A 8 A VDE Gutachten mit Fertigungsüberwachung mm²/AWG/kcmil 0.2-1.5 Voltage 160 V Current 8 A IECEE CB Scheme mm²/AWG/kcmil 0.2-1.5 Voltage 160 V Current 8 A CCA mm²/AWG/kcmil 0.2-1.5 Voltage 160 V Current 8 A
REF 1840366 PHOENIX CONTACT 12 / 14 © PHOENIX CONTACT 2017 2017-12-19 Product version 03 Document revision 0 cULus Recognized Use group B D mm²/AWG/kcmil 30-14 30-14 Voltage 300 V 300 V Current 8 A 8 A EAC
REF 1840366 PHOENIX CONTACT 13 / 14 © PHOENIX CONTACT 2017 2017-12-19 Product version 03 Document revision 0
16 Commercial Data
Order No. 1840492 Type MC 1,5/15-ST-3,5 Pieces per package 50 Net weight 10.234 g GTIN 4017918111656 Information that applies locally, see link on page 1 Country of origin Information that applies locally, see link on page 1 Order No. Type
1843732 MCV 1,5/15-G-3,5
1844346 MC 1,5/15-G-3,5
1897225 EMC 1,5/15-G-3,5
1911143 EMCV 1,5/15-G-3,5
1952911 MCDNV 1,5/15-G1-3,5 P26THR
1953143 MCDNV 1,5/15-G1-3,5 P14THR
1953842 MCDN 1,5/15-G1-3,5 P26THR
1954061 MCDN 1,5/15-G1-3,5 P14THR
Description Order No. Type 0804073 SK 3,5/2,8:FORTL.ZAHLEN Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-com- ponent grip, with non-slip grip
1205037 SZS 0,4X2,5 VDE
0805399 SK 3,81/2,8:UNBEDRUCKT
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
1051993 B-STIFT
18 Accessories
REF 1840366 PHOENIX CONTACT 14 / 14PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany phoenixcontact.com © PHOENIX CONTACT 2017
19 Combination tests
Specification IEC 61984 IEC 61984 IEC 61984 IEC 61984 Mechanical tests (A) Insertion/withdrawal force per position approx. 6 N / 4 N approx. 6 N / 4 N approx. 8 N / 5 N approx. 7 N / 4 N Polarization when inserted Requirement >20 N Test passed Test passed Test passed Test passed Contact holder in insert Requirements >20 N Test passed Test passed Test passed Test passed Durability tests (B) Contact resistance R1 1.3 mΩ 1.8 mΩ 1.3 mΩ 2.2 mΩ Insertion/withdrawal cycles 25 25 25 25 Contact resistance R2 1.4 mΩ 2.2 mΩ 1.3 mΩ 2.2 mΩ Rated impulse voltage at sea level Voltage waveform ≥ (1.2/50 μs) 2.95 kV 2.95 kV 2.95 kV 2.95 kV Power-frequency withstand voltage Voltage waveform ≥ (50/60 Hz) 1.39 kV 1.39 kV 1.39 kV 1.39 kV Insulation resistance Requirements > 5 MΩ 1.6 TΩ 54 TΩ > 4 TΩ > 0.2 TΩ Thermal tests (C) Tested number of positions 20 20 20 5 Tested conductor cross section 1.5 mm² 1.5 mm² 1.5 mm² 1.5 mm² Test current 8 A DC 8 A DC 8 A 8 A Upper limiting temperature Requirements < 100°C Test passed Test passed Test passed Test passed Climatic tests (D) Test sequence 1: low temperature storage -40 °C/2 h -40 °C/2 h -40 °C/2 h -40 °C/2 h Test sequence 2: heat storage 100 °C/168 h 100 °C/168 h 100 °C/168 h 100 °C/168 h Test sequence 3: noxious gas storage (ISO 6988) 0.2 dm
3 SO2 on 300 dm3/
40 °C/1 cycle 0.2 dm3 SO2 on 300 dm3/ 40 °C/1 cycle 0.2 dm3 SO2 on 300 dm3/ 40 °C/1 cycle 0.2 dm3 SO2 on 300 dm3/ 40 °C/1 cycle Rated impulse voltage at sea level Voltage waveform ≥ (1.2/50 μs) 2.95 kV 2.95 kV 2.95 kV 2.95 kV Power-frequency withstand voltage Voltage waveform ≥ (50/60 Hz) 1.39 kV 1.39 kV 1.39 kV 1.39 kV Environmental and endurance tests (E) Specification IEC 61984:2008-10 IEC 61984:2008-10 IEC 61984:2008-10 IEC 61984:2008-10 Degree of protection Finger safety with IP20 test finger Finger safety with IP20 test finger Finger safety with IP20 test finger Finger safety with IP20 test finger