1935860

1935860 PHOENIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 9

Technical content

Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. PCB terminal block, nominal current: 32 A, rated voltage (III/2): 400 V, nominal cross section: 2.5 mm2, number of potentials: 11, number of rows: 1, number of positions per row: 11, product range: PT 2,5/..-H, pitch: 5 mm, connection method: Screw connection with wire protector, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, Pin layout: Linear pinning, Solder pin [P]: 4.1 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard. When using ferrules, 250 V are only achieved in combination with overvoltage category/degree of pollution II/2. Your advantages Well-known connection principle allows worldwide use• Low temperature rise, thanks to maximum contact force High terminal block capacity thanks to rectangular terminal block space Allows connection of two conductors The latching on the side enables various numbers of positions to be combined Commercial Data Item number 1935860 Packing unit 1 pc Minimum order quantity 50 pc Note Made to Order (non-returnable) Sales Key A03 Product Key AAMFNA Catalog Page Page 427 (C-1-2013) GTIN 4017918948481 Weight per Piece (including packing) 13.1 g Weight per Piece (excluding packing) 13.1 g Customs tariff number 85369010 Country of origin PL PCB terminal block - PT 2,5/11-5,0-H 1935860 https://www.phoenixcontact.com/us/products/1935860 Jan 5, 2023, 7:25 AM Page 1 (9)

Product line COMBICON Terminals M Product type Printed circuit board terminal Number of positions 11 Pitch 5 mm Number of connections 11 Number of rows 1 Number of potentials 11 Pin layout Linear pinning Solder pins per potential 1 Electrical properties Nominal current IN 32 A Nominal voltage UN 400 V Degree of pollution 3 Rated voltage (III/3) 250 V Rated surge voltage (III/3) 4 kV Rated voltage (III/2) 400 V Rated surge voltage (III/2) 4 kV Connection data Connection technology Type PC termination block Nominal cross section 2.5 mm² Conductor connection Connection method Screw connection with wire protector Conductor cross section solid 0.5 mm² ... 4 mm² Conductor cross section flexible 0.5 mm² ... 4 mm² Conductor cross section AWG 20 ... 10 Conductor cross section flexible, with ferrule without plastic sleeve 2 conductors with same cross section, flexible, with ferrule without plastic sleeve 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve Stripping length 6.5 mm PCB terminal block - PT 2,5/11-5,0-H 1935860 https://www.phoenixcontact.com/us/products/1935860 Jan 5, 2023, 7:25 AM Page 2 (9)

Mounting type Wave soldering Pin layout Linear pinning Drive form screw head Philipps recess with slotted Torx Drive form screw head Philipps recess with slotted Torx Material specifications Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 Contact material Cu alloy Surface characteristics Tin-plated Metal surface terminal point (top layer) Tin (3 - 12 µm Sn) Metal surface terminal point (middle layer) Nickel (1.5 - 4 µm Ni) Metal surface soldering area (top layer) Tin (3 - 12 µm Sn) Metal surface soldering area (middle layer) Nickel (1.5 - 4 µm Ni) Material data - housing Color (Housing) green (6021) Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2- 775 Temperature for the ball pressure test according to EN 60695- 10-2 125 °C Material data – actuating element Color () () Notes Note on application For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). Dimensions Dimensional drawing PCB terminal block - PT 2,5/11-5,0-H 1935860 https://www.phoenixcontact.com/us/products/1935860 Jan 5, 2023, 7:25 AM Page 3 (9)

Width [w] 55 mm Height [h] 17.6 mm Length [l] 9 mm Installed height 13.5 mm Solder pin length [P] 4.1 mm PCB design Pin spacing 5 mm Electrical tests Air clearances and creepage distances | Specification IEC 60947-1:2007-06 + A1:2010-12 + A2:2014-09 Insulating material group I Comparative tracking index (IEC 60112) CTI 600 Rated insulation voltage (III/3) 250 V Rated surge voltage (III/3) 4 kV minimum clearance value - non-homogenous field (III/3) 3 mm minimum creepage distance (III/3) 3.2 mm Rated insulation voltage (III/2) 400 V Rated surge voltage (III/2) 4 kV minimum clearance value - non-homogenous field (III/2) 3 mm minimum creepage distance (III/2) 3 mm Rated insulation voltage (II/2) 630 V Rated surge voltage (II/2) 4 kV minimum clearance value - non-homogenous field (II/2) 3 mm minimum creepage distance (II/2) 3.2 mm Environmental and real-life conditions Ambient conditions Ambient temperature (operation) -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve) Ambient temperature (storage/transport) -40 °C ... 70 °C Relative humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 °C ... 100 °C Packaging specifications Type of packaging packed in cardboard PCB terminal block - PT 2,5/11-5,0-H 1935860 https://www.phoenixcontact.com/us/products/1935860 Jan 5, 2023, 7:25 AM Page 4 (9)

13,5 4,5 4,1 a+5 a 2,5 Drilling plan/solder pad geometry a 52,5 4,5 1,3 PCB terminal block - PT 2,5/11-5,0-H 1935860 https://www.phoenixcontact.com/us/products/1935860 Jan 5, 2023, 7:25 AM Page 5 (9)

 IECEE CB Scheme Approval ID: DE1-63844 Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2 250 V 32 A - 0.5 - 4  EAC Approval ID: B.01687  cULus Recognized Approval ID: E60425-20030211 Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2 Use group B

300 V 20 A 20 - 12 -

300 V 10 A 20 - 12 -

 VDE Gutachten mit Fertigungsüberwachung Approval ID: 40029839 Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2 250 V 32 A - 0.5 - 4 PCB terminal block - PT 2,5/11-5,0-H 1935860 https://www.phoenixcontact.com/us/products/1935860 Jan 5, 2023, 7:25 AM Page 6 (9)

ECLASS-9.0 27440401 ECLASS-10.0.1 27440401 ECLASS-11.0 27460101 ETIM ETIM 8.0 EC002643 UNSPSC UNSPSC 21.0 39121400 PCB terminal block - PT 2,5/11-5,0-H 1935860 https://www.phoenixcontact.com/us/products/1935860 Jan 5, 2023, 7:25 AM Page 7 (9)

Environmental Product Compliance REACh SVHC Lead 7439-92-1 Environmentally Friendly Use Period = 50 yearsChina RoHS For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” PCB terminal block - PT 2,5/11-5,0-H 1935860 https://www.phoenixcontact.com/us/products/1935860 Jan 5, 2023, 7:25 AM Page 8 (9)

Screwdriver - SZS 0,6X3,5 - 1205053 https://www.phoenixcontact.com/us/products/1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip Marker card Marker card - SK 5/3,8:FORTL.ZAHLEN - 0804183 https://www.phoenixcontact.com/us/products/0804183 etc. up to 91 ... (99)100, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: 5 x 3.8 mm Phoenix Contact 2023 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com PCB terminal block - PT 2,5/11-5,0-H 1935860 https://www.phoenixcontact.com/us/products/1935860 Jan 5, 2023, 7:25 AM Page 9 (9)