1926264

1926264 PHOENIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

https://www.phoenixcontact.com/pi/products/1926264 04/01/2020 Page 1 / 10 Printed-circuit board connector - MSTBT 2,5 HC/ 5-ST - 1926264 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB connector, nominal current: 16 A, rated voltage (III/2): 320 V, nominal cross section: 2.5 mm², number of positions: 5, pitch: 5 mm, connection method: Screw connection with tension sleeve, color: green, contact surface: Tin, The T-shape of the MSTBT plug distributes the height uniformly over the upper and lower sides of the printed circuit board The figure shows a 10-position version of the product Your advantages Well-known connection principle allows worldwide use Low temperature rise, thanks to maximum contact force Allows connection of two conductors Integrated double steel spring provides additional safety in the event of temperature and power fluctuations Key Commercial Data Packing unit 50 pc GTIN GTIN 4017918811426 Technical data Item properties Brief article description Printed-circuit board connector Plug-in system POWER COMBICON 2,5 Type of contact Female connector Range of articles MSTBT 2,5 HC/..-ST Pitch 5 mm Number of positions 5 Connection method Screw connection with tension sleeve Drive form screw head Slotted (L) Screw thread M3 Locking without Number of levels 1

https://www.phoenixcontact.com/pi/products/1926264 04/01/2020 Page 2 / 10 Printed-circuit board connector - MSTBT 2,5 HC/ 5-ST - 1926264 Technical data Item properties Number of connections 5 Number of potentials 5 Electrical parameters Nominal current 16 A Nom. voltage 320 V Rated voltage 250 V Rated voltage (III/2) 320 V Rated voltage (II/2) 630 V Rated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Connection capacity Connection method Screw connection with tension sleeve pluggable Yes Conductor cross section AWG / kcmil 24 ... 12 2 conductors with same cross section, solid 0.2 mm² ... 1 mm² 2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.25 mm² ... 1 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule Cylindrical gauge a x b / diameter 2.8 mm x 2.0 mm / 2.4 mm Stripping length 7 mm Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics hot-dip tin-plated Metal surface terminal point (top layer) Tin (4 - 8 µm Sn) Metal surface contact area (top layer) Tin (4 - 8 µm Sn) Material data - housing Housing color green (6021) Insulating material PA Insulating material group I CTI according to IEC 60112 600

https://www.phoenixcontact.com/pi/products/1926264 04/01/2020 Page 3 / 10 Printed-circuit board connector - MSTBT 2,5 HC/ 5-ST - 1926264 Technical data Material data - housing Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2-13 775 Temperature for the ball pressure test according to EN 60695-10-2 125 °C Dimensions for the product Length [ l ] 18.2 mm Width [ w ] 25 mm Height [ h ] 15 mm Pitch 5 mm Height (without solder pin) 15 mm Dimension a 20 mm Packaging information Type of packaging packed in cardboard Pieces per package 50 Denomination packing units Pcs. General product information Note In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load. In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load. Ambient conditions Ambient temperature (storage/transport) -40 °C ... 70 °C Ambient temperature (assembly) -5 °C ... 100 °C Ambient temperature (operation) -40 °C ... 100 °C (dependent on the derating curve) Termination and connection method Test for conductor damage and slackening IEC 60999-1:1999-11 Test passed Pull-out test Pull-out test IEC 60999-1:1999-11 Test passed Conductor cross section / conductor type / tensile force 0.2 mm² / solid / > 10 N 0.2 mm² / flexible / > 10 N 2.5 mm² / solid / > 50 N 2.5 mm² / flexible / > 50 N Mechanical tests according to standard Visual examination Test passed IEC 60512-1-1:2002-02 Dimensional test Test passed IEC 60512-1-2:2002-02

https://www.phoenixcontact.com/pi/products/1926264 04/01/2020 Page 4 / 10 Printed-circuit board connector - MSTBT 2,5 HC/ 5-ST - 1926264 Technical data Mechanical tests according to standard Resistance of marking Test passed IEC 60068-2-70:1995-12 Result Test passed Specification IEC 60512-13-2:2006-02 No. of cycles 25 Insertion strength per pos. approx. 6 N Withdraw strength per pos. approx. 5 N Polarization and coding Test passed IEC 60512-13-5:2006-02 Result Test passed Specification IEC 60512-15-1:2008-05 Test force per pos. 22 N Air clearances and creepage distances Clearances and creepage distances IEC 60664-1:2007-04 Specification IEC 60664-1:2007-04 Minimum clearance - inhomogeneous field (III/3) 3 mm Minimum clearance - inhomogeneous field (III/2) 3 mm Minimum clearance - inhomogeneous field (II/2) 3 mm Minimum creepage distance value (III/3) 3.2 mm Minimum creepage distance value (III/2) 3.2 mm Minimum creepage distance value (II/2) 3.2 mm Current carrying capacity / derating curves Mechanical tests (A) Insertion strength per pos. approx. 6 N Withdraw strength per pos. approx. 5 N Polarization when inserted requirement >20 N Test passed Contact holder in insert requirements >20 N Test passed Durability tests (B) Specification IEC 60512-9-1:2010-03 Contact resistance R1 0.7 mΩ Insertion/withdrawal cycles 25 Contact resistance R2 0.9 mΩ Impulse withstand voltage at sea level 4.8 kV Power-frequency withstand voltage 2.21 kV Insulation resistance, neighboring positions 13 TΩ Climatic tests (D) Specification ISO 6988:1985-02 Cold stress -40 °C/2 h Thermal stress 100 °C/168 h Corrosive stress 0.2 dm SO2 on 300 dm /40 °C/1 cycle

https://www.phoenixcontact.com/pi/products/1926264 04/01/2020 Page 5 / 10 Printed-circuit board connector - MSTBT 2,5 HC/ 5-ST - 1926264 Technical data Climatic tests (D) Impulse withstand voltage at sea level 4.8 kV Power-frequency withstand voltage 2.21 kV Environmental and durability tests (E) Specification IEC 61984:2008-10 Result, degree of protection, IP code Finger safety with IP20 test finger Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Diagram

https://www.phoenixcontact.com/pi/products/1926264 04/01/2020 Page 6 / 10 Printed-circuit board connector - MSTBT 2,5 HC/ 5-ST - 1926264 Diagram Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27260700 eCl@ss 4.1 27260700 eCl@ss 5.0 27260700 eCl@ss 5.1 27260700 eCl@ss 6.0 27260700

https://www.phoenixcontact.com/pi/products/1926264 04/01/2020 Page 7 / 10 Printed-circuit board connector - MSTBT 2,5 HC/ 5-ST - 1926264 Classifications eCl@ss eCl@ss 7.0 27440309 eCl@ss 8.0 27440309 eCl@ss 9.0 27440309 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002638 ETIM 5.0 EC002638 ETIM 6.0 EC002638 ETIM 7.0 EC002638 UNSPSC UNSPSC 6.01 30211810 UNSPSC 7.0901 39121409 UNSPSC 11 39121409 UNSPSC 12.01 39121409 UNSPSC 13.2 39121409 UNSPSC 18.0 39121409 UNSPSC 19.0 39121409 UNSPSC 20.0 39121409 UNSPSC 21.0 39121409 Approvals Approvals Approvals IECEE CB Scheme / EAC / cULus Recognized / VDE Zeichengenehmigung Ex Approvals Approval details IECEE CB Scheme http://www.iecee.org/ DE1-60988-B1B2 Nominal voltage UN 250 V Nominal current IN 16 A mm²/AWG/kcmil 0.2-2.5

https://www.phoenixcontact.com/pi/products/1926264 04/01/2020 Page 8 / 10 Printed-circuit board connector - MSTBT 2,5 HC/ 5-ST - 1926264 Approvals EAC B.01687 cULus Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E60425-19931011 B D Nominal voltage UN 300 V 300 V Nominal current IN 16 A 10 A mm²/AWG/kcmil 30-12 30-12 VDE Zeichengenehmigung http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx 40050079 Nominal voltage UN 250 V Nominal current IN 16 A mm²/AWG/kcmil 0.2-2.5 Accessories Accessories Bridge Insertion bridge - EBP 2- 5 - 1733169 Insertion bridge for connectors with 5.0 mm or 5.08 mm pitch Coding element Coding profile - CP-MSTB - 1734634 Coding profile, is inserted into the slot on the plug or inverted header, red insulating material Labeled terminal marker

https://www.phoenixcontact.com/pi/products/1926264 04/01/2020 Page 9 / 10 Printed-circuit board connector - MSTBT 2,5 HC/ 5-ST - 1926264 Accessories Marker card - SK 5/3,8:FORTL.ZAHLEN - 0804183 mounting type: adhesive, for terminal block width: 5 mm, lettering field size: 5 x 3.8 mm Marker card - SK 3,8 REEL P5 WH CUS - 0825124 Marker card, Card, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: continuous x 3.8 mm Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip Terminal marking Marker card - SK U/3,8 WH:UNBEDRUCKT - 0803906 Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 3.8 mm, Number of individual labels: 1440 Marker strip - SK 3,8 WH:REEL - 0805218 Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 90000 mm, lettering field size: continuous x 3.8 mm, Number of individual labels: 210000 Additional products

https://www.phoenixcontact.com/pi/products/1926264 04/01/2020 Page 10 / 10 Printed-circuit board connector - MSTBT 2,5 HC/ 5-ST - 1926264 Accessories Feed-through header - MSTBA 2,5 HC/ 5-G - 1923788 PCB headers, nominal current: 16 A, rated voltage (III/2): 320 V, nominal cross section: 2.5 mm², number of positions: 5, pitch: 5 mm, color: green, contact surface: Tin, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.5 mm Feed-through header - MSTBVA 2,5 HC/ 5-G - 1924224 PCB headers, nominal current: 16 A, rated voltage (III/2): 320 V, nominal cross section: 2.5 mm², number of positions: 5, pitch: 5 mm, color: green, contact surface: Tin, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.9 mm Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8

32825 Blomberg

Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com