1923160 PHOENIX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 21
Technical content
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 1 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) 1-level terminal block with double connection on one side, cross section: 0.2 - 4 mm², AWG: 24 - 12, width: 6.2 mm, color: Green Key Commercial Data Packing unit 50 pc GTIN GTIN 4017918269104 Technical data General Number of positions 1 Number of levels 2 Number of connections 3 Potentials 1 Nominal cross section 4 mm² Color green Insulating material PA Flammability rating according to UL 94 V2 Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 1.02 W (the value is multiplied when connecting multiple levels) Maximum load current
32 A (in case of a 4 mm² conductor cross section, the maximum load
current must not be exceeded by the total current of all connected conductors.) Nominal current IN 32 A (with 4 mm² conductor cross section) Nominal voltage UN 500 V (With tightened clamping screws)
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 2 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Technical data General Open side panel Yes Ambient temperature (operation) -60 °C ... 85 °C Ambient temperature (storage/transport) -25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C) Permissible humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 °C ... 70 °C Ambient temperature (actuation) -5 °C ... 70 °C Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 7.2 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 (+/- 2) rpm Bending test turns 135 Bending test conductor cross section/weight 0.2 mm² / 0.2 kg 1.5 mm² / 0.4 kg 4 mm² / 0.9 kg Tensile test result Test passed Conductor cross section tensile test 0.2 mm² Tractive force setpoint 10 N Conductor cross section tensile test 1.2 mm² Tractive force setpoint 40 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N Result of tight fit on support Test passed Tight fit on carrier NS 32/NS 35 Setpoint 1 N Result of voltage-drop test Test passed Requirements, voltage drop U1 ≤ 3,2 mV U2 ≤ 1,5 x U1 dT ≤ 45 K Result of temperature-rise test Test passed Requirement temperature-rise test Increase in temperature ≤ 45 K Short circuit stability result Test passed Conductor cross section short circuit testing 4000000 mm² Short-time current 0.00048 kA Result of thermal test Test passed
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 3 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Technical data General Ageing test for screwless modular terminal block temperature cycles 192 Proof of thermal characteristics (needle flame) effective duration 30 s Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05 Test spectrum Service life test category 2, bogie-mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s /Hz Acceleration 3.12 g Test duration per axis 5 h Test directions X-, Y- and Z-axis Shock form Half-sine Acceleration 30g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Smoke gas toxicity NFPA 130 (SMP 800C) passed Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 6.2 mm End cover width 2 mm Length 50.5 mm Height NS 35/7,5 47 mm Height NS 35/15 54.5 mm Height NS 32 52 mm Connection data Connection 1 level Connection method Screw connection Screw thread M3 Stripping length 8 mm Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 4 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Technical data Connection data Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 4 mm² Min. AWG conductor cross section, flexible 24 Max. AWG conductor cross section, flexible 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² Cross section with insertion bridge, solid max. 4 mm² Cross section with insertion bridge, stranded max. 4 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1.5 mm² Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm² Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1.5 mm² Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.25 mm² Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 1.5 mm² Connection in acc. with standard IEC/EN 60079-7 Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 4 mm² Internal cylindrical gage A4 Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 IEC/EN 60079-7 Flammability rating according to UL 94 V2 Environmental Product Compliance
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 5 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Technical data Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram Classifications eCl@ss eCl@ss 10.0.1 27141120 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 ETIM 7.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 6 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Classifications UNSPSC UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals DNV GL / CSA / UL Recognized / KEMA-KEUR / IECEE CB Scheme / EAC / LR / EAC Ex Approvals ATEX / UL Recognized / cUL Recognized / EAC Ex / cULus Recognized Approval details DNV GL https://approvalfinder.dnvgl.com/ TAE00001CT CSA http://www.csagroup.org/services-industries/product-listing/ 13631 Nominal voltage UN 300 V Nominal current IN 30 A mm²/AWG/kcmil 22-10 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425 B C Nominal voltage UN 300 V 150 V Nominal current IN 35 A 35 A mm²/AWG/kcmil 30-10 30-10 KEMA-KEUR http://www.dekra-certification.com 71-107963 Nominal voltage UN 500 V
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 7 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Approvals Nominal current IN 32 A mm²/AWG/kcmil 4 IECEE CB Scheme http://www.iecee.org/ NL-59393 Nominal voltage UN 500 V Nominal current IN 32 A mm²/AWG/kcmil 4 EAC RU C- DE.A*30.B.01742 LR http://www.lr.org/en 88/20086 EAC RU C- DE.BL08.B.00534 Accessories Accessories Bridge Fixed bridge - FB-150 METER - 0201595 Cross connection rail, for fixed bridging of identical inputs and outputs, made of Cu, nickel-plated, 1 m long DIN rail DIN rail perforated - NS 32 PERF 2000MM - 1201002 DIN rail perforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 8 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Accessories DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015 DIN rail, unperforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 9 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Accessories DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 10 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Accessories DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 11 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Accessories DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15 DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver End block
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 12 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Accessories End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray End clamp - E/UK - 1201442 End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color: gray End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray End cover
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 13 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Accessories End cover - D-UK 5-TWIN - 1923034 End cover, length: 50 mm, width: 2 mm, height: 36 mm, color: gray Cover segment - UK 5-TWIN DECKELSEGMENT - 1923089 End cover segment, for covering multi-conductor terminal blocks when two-conductor terminal blocks are aligned, color: Gray Insertion bridge Insertion bridge - EB 3- 6 - 0201142 Insertion bridge, pitch: 6.2 mm, number of positions: 3, color: gray Insertion bridge - EB 2- 6 - 0201155 Insertion bridge, pitch: 6.2 mm, number of positions: 2, color: gray Insertion bridge - EB 10- 6 - 0201139 Insertion bridge, pitch: 6.2 mm, number of positions: 10, color: gray Insulating sleeve
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 14 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Accessories Bridge bar isolator - IS-K 4 - 1302338 Bridge bar isolator, color: gray Labeled terminal marker Zack marker strip - ZB 6 CUS - 0824992 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 15 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Accessories Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks - ZB 6,LGS:U-N - 1051430 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks - UC-TM 6 CUS - 0824589 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80 Marker for terminal blocks - UCT-TM 6 CUS - 0829602 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60 Partition plate Separating plate - TS-K - 1302215 Separating plate, length: 22 mm, width: 0.5 mm, height: 22 mm, color: gray Screw bridge
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 16 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Accessories Jumper - ISSBI 10- 6 - 0301505 Jumper, pitch: 6 mm, number of positions: 10, color: silver Jumper - LB 10-6 GY - 0202358 Jumper, pitch: 6 mm, number of positions: 10, color: gray Jumper - LB 100-6 GY - 0202345 Jumper, pitch: 6 mm, number of positions: 100, color: gray Jumper - LB 100-6 RD - 0202316 Jumper, number of positions: 100, color: red Jumper - LB 100-6 BU - 0202303 Jumper, number of positions: 100, color: blue
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 17 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Accessories Jumper - LB 10-6 RD - 0202293 Jumper, pitch: 6 mm, number of positions: 10, color: red Jumper - LB 10-6 BU - 0202280 Jumper, pitch: 6 mm, number of positions: 10, color: blue Fixed bridge - FBI 100- 6 - 0201650 Fixed bridge, pitch: 6.2 mm, number of positions: 100, color: silver Fixed bridge - FBI 10- 6 - 0203250 Fixed bridge, pitch: 6.2 mm, number of positions: 10, color: silver Fixed bridge - FBI 20- 6 - 0201867 Fixed bridge, pitch: 6.2 mm, number of positions: 20, color: silver Short-circuit connector
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 18 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Accessories Short-circuit connector - KSS 3- 6 - 0309523 Short-circuit connector, pitch: 6 mm, number of positions: 3, color: black Short-circuit connector - KSS 6 - 0301547 Short-circuit connector, pitch: 6 mm, number of positions: 2, color: black Switching jumper Switching jumper - USBRJ 2-7 - 2305538 Switching jumper, number of positions: 2, color: silver Switching jumper - USBR 2-7 - 2303239 Switching jumper, pitch: 7 mm, number of positions: 2, color: silver Terminal marking Marker card - SBS 6:UNBEDRUCKT - 1007222 Marker card, Card, white, unlabeled, can be labeled with: Marker pen, mounting type: snap into tall marker groove, snap into flat marker groove, for terminal block width: 6 mm, lettering field size: 6 x 6.1 mm, Number of individual labels: 250
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 19 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Accessories Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80 Marker for terminal blocks - UCT-TM 6 - 0828736 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60 Test plug terminal block Test plugs - PS-UK 2,5 B/Z-6 - 3001239 Test plugs, color: red Test plugs - PS-UK 2,5 B/E - 3001132 Test plugs, color: red
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 20 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Accessories Reducing plug - RPS - 0201647 Reducing plug, color: gray Test socket Female test connector - PSBJ 3/13/4 - 0201304 Female test connector, color: silver Female test connector - PSB 3/10/4 - 0601292 Female test connector, color: silver Warning label printed Warning label - WS 5- 6 - 1004403 Warning plate, with 2 plastic screws, across 5 terminal blocks, pitch 6 mm Warning label - WS 4- 6 - 1004209 Warning plate, with 2 plastic screws, across 4 terminal blocks, pitch 6 mm
https://www.phoenixcontact.com/pi/products/1923160 09/12/2020 Page 21 / 21 Feed-through terminal block - UK 5-TWIN GN - 1923160 Accessories Warning label - WS 3- 6 - 1004115 Warning plate, with 2 plastic screws, across 3 terminal blocks, pitch 6 mm Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8
32825 Blomberg
Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com