1923157 PHOENIX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
https://www.phoenixcontact.com/pi/products/1923157 09/26/2019 Page 1 / 6 Feed-through terminal block - UK 5-TWIN RD - 1923157 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) 1-level terminal block with double connection on one side, cross section: 0.2 - 4 mm², AWG: 24 - 12, width: 6.2 mm, color: Red Key Commercial Data Packing unit 50 pc GTIN GTIN 4017918203771 Technical data General Number of positions 1 Number of levels 2 Number of connections 3 Potentials 1 Nominal cross section 4 mm² Color red Insulating material PA Flammability rating according to UL 94 V2 Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 1.02 W (the value is multiplied when connecting multiple levels) Designation Level 1 above 1+2 below 1 Maximum load current
32 A (in case of a 4 mm² conductor cross section, the maximum load
current must not be exceeded by the total current of all connected conductors.) Nominal current IN 32 A (with 4 mm² conductor cross section)
https://www.phoenixcontact.com/pi/products/1923157 09/26/2019 Page 2 / 6 Feed-through terminal block - UK 5-TWIN RD - 1923157 Technical data General Nominal voltage UN 500 V (With tightened clamping screws) Open side panel Yes Shock protection test specification IEC 60529:2001-02 Back of the hand protection guaranteed Finger protection guaranteed Note regarding shock protection Only with closed clamping unit Result of surge voltage test Test passed Surge voltage test setpoint 7.3 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.25 mm² / 0.3 kg 4 mm² / 0.9 kg Tensile test result Test passed Conductor cross section tensile test 0.2 mm² Tractive force setpoint 10 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N Result of tight fit on support Test passed Tight fit on carrier NS 35/NS 32 Setpoint 1 N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 4 mm² Short-time current 0.48 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Relative insulation material temperature index (Elec., UL 746 B) 125 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C Dimensions Width 6.2 mm End cover width 2 mm Length 50.5 mm Height NS 35/7,5 47 mm
https://www.phoenixcontact.com/pi/products/1923157 09/26/2019 Page 3 / 6 Feed-through terminal block - UK 5-TWIN RD - 1923157 Technical data Dimensions Height NS 35/15 54.5 mm Height NS 32 52 mm Connection data Connection 1 level Connection method Screw connection Screw thread M3 Stripping length 8 mm Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 4 mm² Min. AWG conductor cross section, flexible 24 Max. AWG conductor cross section, flexible 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² Cross section with insertion bridge, solid max. 4 mm² Cross section with insertion bridge, stranded max. 4 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, min. 0.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Connection in acc. with standard IEC/EN 60079-7 Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12
https://www.phoenixcontact.com/pi/products/1923157 09/26/2019 Page 4 / 6 Feed-through terminal block - UK 5-TWIN RD - 1923157 Technical data Connection data Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 4 mm² Internal cylindrical gage A4 Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V2 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram Approvals Approvals Approvals DNV GL / CSA / UL Recognized / KEMA-KEUR / IECEE CB Scheme / EAC Ex Approvals ATEX / UL Recognized / cUL Recognized / EAC Ex / cULus Recognized Approval details DNV GL https://approvalfinder.dnvgl.com/ TAE00001CT
https://www.phoenixcontact.com/pi/products/1923157 09/26/2019 Page 5 / 6 Feed-through terminal block - UK 5-TWIN RD - 1923157 Approvals CSA http://www.csagroup.org/services-industries/product-listing/ 13631 Nominal voltage UN 300 V Nominal current IN 30 A mm²/AWG/kcmil 22-10 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425 B C Nominal voltage UN 150 V 300 V 150 V Nominal current IN 30 A 35 A 35 A mm²/AWG/kcmil 30-10 30-10 30-10 KEMA-KEUR http://www.dekra-certification.com 71-107963 Nominal voltage UN 500 V Nominal current IN 32 A mm²/AWG/kcmil 4 IECEE CB Scheme http://www.iecee.org/ NL-59393 Nominal voltage UN 500 V Nominal current IN 32 A mm²/AWG/kcmil 4 EAC RU C- DE.A*30.B.01742
https://www.phoenixcontact.com/pi/products/1923157 09/26/2019 Page 6 / 6 Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8
32825 Blomberg
Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com