FPI018_V03 STEGO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Austrittsfilter FPI 118 Filterlüfter FPI 018 Klappen Filtermatte SYSTEM FPI warmkalt Filterlüfter FPO 018 Eintrittsfilter FPO 118 Klappen Filtermatte SYSTEM FPO PRODUCT CATALOGUE - STEGO COOLING FIL TER FAN PLUS FPI/FPO 018 | up to 1010 m³/h (291 x 291 mm) TECHNICAL DATA Axial fan, ball bearing fan speed 1: service life L10 at +40 °C (+104 °F): min. 76,000 h rotor metal fan speed 2: service life L10 at +40 °C (+104 °F): min. 54,000 h rotor plastic Connection 3-pole clamp for 2.5 mm², clamping torque 0.8 Nm max. Casing, hood, flaps plastic according to UL94 V-0, light grey; UV light resistant according to UL746C (f1) Enclosure cut-out 291 x 291+1 mm Mounting frame 4 built-in ratchet braces for mounting (6 notches for wall thickness 1 — 4 mm). Additional use of screws possible if needed1. Filter mat ISO coarse 55% acc. to ISO 16890 (G3), initial gravimetric arrestance 57 % Filter material synthetic fibre with progressive construction, temperature resistant to +100 °C, self-extinguishing class F1, moisture resistant to 100 % RH, reusable Operating temperature fan speed 1 & 2, 50 Hz: -25 to +55 °C (-13 to +131 °F) fan speed 1, 60 Hz: -25 to +35 °C (-13 to +95 °F) fan speed 2, 60 Hz: -25 to +50 °C (-13 to +122 °F) Storage temperature -40 to +70 °C (-40 to +158 °F) Operating/Storage humidity max. 75 % RH (non-condensing) Protection type/Protection class IP54 / I (earthed) Environmental rating UL/NEMA UL TYPE 12 / NEMA 12 Approvals VDE, UL File No. E234324, EAC Note other voltages on request 1 Drilling marks for screw mounting are indicated on mounting frame. Filter fans are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components. The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting airflow prevents formation of localised hot pockets in installations and protects electronic components from overheating. The Filter Fan Plus series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree of airflow. A ratchet mechanism is used for mounting and provides high stability and tightness. Depending on the application there are two systems that are available – the FPI or FPO system. The FPI system is a standard installation with a filter fan in the lower part of the enclosure which ensures that fresh air is fed into the enclosure (airflow direction "In"). This system consists of a filter fan and exit filter. Whereas in the FPO system, the filter fan is located in the upper area of the enclosure to avoid heat buildups (airflow direction "Out"). The FPO system is composed of an intake filter and exit filter fan. The Filter Fan Plus series may also be used outdoors with appropriate protective measures or when equipped with weather proof accessories, e.g. Hose-proof Hood FFH 086. > New air-flap outlet technology for high airflow > Easy mounting > Protection type test/Environmental rating by independent testing institutes (VDE and UL) > Two systems for optimal airflow (FPI/FPO) > Standard enclosure cut-out sizes (5 sizes) > One filter mat > Two fan speeds SYSTEM FPI AIRFLOW DIRECTION "IN" SYSTEM FPO AIRFLOW DIRECTION "OUT" Enclosure cut-outEnclosure cut-out SYSTEM FPI AIRFLOW DIRECTION "IN" SYSTEM FPO AIRFLOW DIRECTION "OUT" TECHNICAL DATASHEET
Filter class 283 x 283 mm Initial gravimetric arrestance 1 packing unit ISO coarse 55% acc. to ISO 16890 (G3) Art. No. 08637.0-00 57 % 5 pieces AIRFLOW DIRECTION "OUT": INTAKE FIL TER FPO 118 Art. No. Depth in enclosure Weight (approx.) Filter mat 11884.0-30 25 mm 0.8 kg ISO coarse 55% acc. to ISO 16890 (G3), initial gravimetric arrestance 57 % warmcold Filter Fan FPO 018 Intake Filter FPO 118 Air-flaps Filter mat SYSTEM FPO AIRFLOW DIRECTION "OUT": FIL TER FAN FPO 018 Art. No. Operating voltage Fan speed Air volume, free flow Air volume with intake filter Current consumption (50/60 Hz) Power consumption Average noise level (DIN EN ISO 4871) Depth in enclosure Weight (approx.) Air outlet 01884.0-00 AC 230 V, 50/60 Hz 1 727 m³/h 413 m³/h 400/480 mA 95 W 63 db (A) 160 mm 3.2 kg air-flaps 01884.0-01 AC 230 V, 50/60 Hz 2 1010 m³/h 599 m³/h 550/700 mA 140 W 70 db (A) 160 mm 3.4 kg air-flaps 01884.9-00 AC 115 V, 50/60 Hz 1 703 m³/h 391 m³/h 660/800 mA 90 W 62 dB (A) 160 mm 3.2 kg air-flaps 01884.9-01 AC 115 V, 50/60 Hz 2 1031 m³/h 609 m³/h 1100/1450 mA 165 W 71 dB (A) 160 mm 3.4 kg air-flaps AIRFLOW DIRECTION "IN": FIL TER FAN FPI 018 Art. No. Operating voltage Fan speed Air volume, free flow Air volume with exit filter Current consumption (50/60 Hz) Power consumption Average noise level (DIN EN ISO 4871) Depth in enclosure Weight (approx.) Filter mat 01874.0-30 AC 230 V, 50/60 Hz 1 433 m³/h 373 m³/h 400/480 mA 95 W 62 db (A) 160 mm 3.1 kg G3 01874.0-31 AC 230 V, 50/60 Hz 2 624 m³/h 560 m³/h 550/700 mA 140 W 70 dB (A) 160 mm 3.3 kg G3 01874.9-30 AC 115 V, 50/60 Hz 1 394 m³/h 339 m³/h 660/800 mA 90 W 61 dB (A) 160 mm 3.1 kg G3 01874.9-31 AC 115 V, 50/60 Hz 2 665 m³/h 593 m³/h 1100/1450 mA 165 W 72 dB (A) 160 mm 3.3 kg G3 AIRFLOW DIRECTION "IN": EXIT FIL TER FPI 118 Art. No. Depth in enclosure Weight (approx.) Air outlet 11874.0-00 50 mm 1.0 kg air-flap outlet technology warmcold Exit Filter FPI 118 Filter Fan FPI 018 Air-flaps Filter mat SYSTEM FPI TECHNICAL DATASHEET