1806122 | DigiCamel IC Datasheet

Online Datasheet

Read 1806122 online.

1806122 PHOENIX | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 12

Technical content

https://www.phoenixcontact.com/pi/products/1806122 09/12/2020 Page 1 / 12 Printed-circuit board connector - FRONT-GMSTB 2,5/ 3- ST-7,62 - 1806122 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB connector, nominal current: 12 A, rated voltage (III/2): 630 V, nominal cross section: 2.5 mm², number of positions: 3, pitch: 7.62 mm, connection method: Front screw connection, color: green, contact surface: Tin The figure shows a 10-position version of the product Your advantages Well-known connection principle allows worldwide use Optimized for tight installation situations: operation and conductor connection from one direction Larger pitch for increased voltage requirements Low temperature rise, thanks to maximum contact force Allows connection of two conductors Key Commercial Data Packing unit 50 pc GTIN GTIN 4017918046798 Technical data Item properties Brief article description Printed-circuit board connector Plug-in system CLASSIC COMBICON Type of contact Female connector Range of articles FRONT-GMSTB 2,5/..-ST Pitch 7.62 mm Number of positions 3 Connection method Front screw connection Screw thread M3 Locking without

https://www.phoenixcontact.com/pi/products/1806122 09/12/2020 Page 2 / 12 Printed-circuit board connector - FRONT-GMSTB 2,5/ 3- ST-7,62 - 1806122 Technical data Item properties Number of levels 1 Number of connections 3 Number of potentials 3 Electrical parameters Nominal current 12 A Nom. voltage 630 V Rated voltage 400 V Rated voltage (III/2) 630 V Rated voltage (II/2) 1000 V Rated surge voltage (III/3) 6 kV Rated surge voltage (III/2) 6 kV Rated surge voltage (II/2) 6 kV Connection capacity Connection method Front screw connection pluggable Yes Conductor cross section AWG / kcmil 24 ... 12 2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.25 mm² ... 1 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² ... 1 mm² Cylindrical gauge a x b / diameter 2.8 mm x 2.0 mm / 2.4 mm Stripping length 10 mm Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics hot-dip tin-plated Metal surface terminal point (top layer) Tin (4 - 8 µm Sn) Metal surface contact area (top layer) Tin (4 - 8 µm Sn) Material data - housing Housing color green (6021) Insulating material PA

https://www.phoenixcontact.com/pi/products/1806122 09/12/2020 Page 3 / 12 Printed-circuit board connector - FRONT-GMSTB 2,5/ 3- ST-7,62 - 1806122 Technical data Material data - housing Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2-13 775 Temperature for the ball pressure test according to EN 60695-10-2 125 °C Dimensions for the product Length [ l ] 27.3 mm Width [ w ] 20.86 mm Height [ h ] 15 mm Pitch 7.62 mm Height (without solder pin) 15 mm Packaging information Type of packaging packed in cardboard Pieces per package 50 Denomination packing units Pcs. General product information Note In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load. Ambient conditions Ambient temperature (storage/transport) -40 °C ... 70 °C Ambient temperature (assembly) -5 °C ... 100 °C Ambient temperature (operation) -40 °C ... 100 °C (dependent on the derating curve) Termination and connection method Test for conductor damage and slackening IEC 60999-1:1999-11 Test passed Pull-out test Pull-out test IEC 60999-1:1999-11 Test passed Conductor cross section / conductor type / tensile force 0.34 mm² / solid / > 15 N 0.2 mm² / flexible / > 10 N 2.5 mm² / solid / > 50 N 2.5 mm² / flexible / > 50 N Mechanical tests according to standard Test specification IEC 61984 Visual inspection IEC 60512-1-1:2002-02

https://www.phoenixcontact.com/pi/products/1806122 09/12/2020 Page 4 / 12 Printed-circuit board connector - FRONT-GMSTB 2,5/ 3- ST-7,62 - 1806122 Technical data Mechanical tests according to standard Dimension check IEC 60512-1-2:2002-02 Resistance of inscriptions IEC 60068-2-70:1995-12 Insertion and withdrawal force IEC 60512-13-2:2006-02 No. of cycles 25 Insertion strength per pos. approx. 8 N Withdraw strength per pos. approx. 6 N Polarization and coding IEC 60512-13-5:2006-02 Contact holder in insert IEC 60512-15-1:2008-05 Test force per pos. 39 N Air clearances and creepage distances Clearances and creepage distances IEC 60664-1:2007-04 Specification IEC 60664-1:2007-04 Minimum clearance - inhomogeneous field (III/3) 5.5 mm Minimum clearance - inhomogeneous field (III/2) 5.5 mm Minimum clearance - inhomogeneous field (II/2) 5.5 mm Minimum creepage distance value (III/3) 5.5 mm Minimum creepage distance value (III/2) 5.5 mm Minimum creepage distance value (II/2) 5.5 mm Current carrying capacity / derating curves Specification IEC 61984:2008-10 Reduction factor 0.8 Note Representation based on IEC 60512-5-2:2002-02 For number of positions, see diagram Mechanical tests (A) Test specification IEC 61984 Insertion strength per pos. approx. 8 N Withdraw strength per pos. approx. 6 N Polarization when inserted requirement >20 N Test passed Contact holder in insert requirements >20 N Test passed Durability tests (B) Specification IEC 60512-9-1:2010-03 Contact resistance R1 1.6 mΩ Insertion/withdrawal cycles 25 Contact resistance R2 1.6 mΩ Impulse withstand voltage at sea level 4.8 kV Power-frequency withstand voltage 2.21 kV

https://www.phoenixcontact.com/pi/products/1806122 09/12/2020 Page 5 / 12 Printed-circuit board connector - FRONT-GMSTB 2,5/ 3- ST-7,62 - 1806122 Technical data Durability tests (B) Insulation resistance, neighboring positions > 0.2 TΩ Thermal tests (C) Specification IEC 60512-5-1:2002-02 Number of positions 12 Conductor cross section 2.5 mm² Test current 12 A Upper limiting temperature requirements <100 °C Test passed Climatic tests (D) Specification ISO 6988:1985-02 Cold stress -40 °C/2 h Thermal stress 100 °C/168 h Corrosive stress 0.2 dm SO2 on 300 dm /40 °C/1 cycle Impulse withstand voltage at sea level 4.8 kV Power-frequency withstand voltage 2.21 kV Environmental and durability tests (E) Specification IEC 61984:2008-10 Result, degree of protection, IP code Finger safety with IP20 test finger Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings

https://www.phoenixcontact.com/pi/products/1806122 09/12/2020 Page 6 / 12 Printed-circuit board connector - FRONT-GMSTB 2,5/ 3- ST-7,62 - 1806122 Diagram Diagram

https://www.phoenixcontact.com/pi/products/1806122 09/12/2020 Page 7 / 12 Printed-circuit board connector - FRONT-GMSTB 2,5/ 3- ST-7,62 - 1806122 Diagram Dimensional drawing Classifications eCl@ss eCl@ss 10.0.1 27440309 eCl@ss 4.0 27260700 eCl@ss 4.1 27260700 eCl@ss 5.0 27260700 eCl@ss 5.1 27260700 eCl@ss 6.0 27260700

https://www.phoenixcontact.com/pi/products/1806122 09/12/2020 Page 8 / 12 Printed-circuit board connector - FRONT-GMSTB 2,5/ 3- ST-7,62 - 1806122 Classifications eCl@ss eCl@ss 7.0 27440309 eCl@ss 8.0 27440309 eCl@ss 9.0 27440309 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002638 ETIM 5.0 EC002638 ETIM 6.0 EC002638 ETIM 7.0 EC002638 UNSPSC UNSPSC 6.01 30211810 UNSPSC 7.0901 39121409 UNSPSC 11 39121409 UNSPSC 12.01 39121409 UNSPSC 13.2 39121409 UNSPSC 18.0 39121409 UNSPSC 19.0 39121409 UNSPSC 20.0 39121409 UNSPSC 21.0 39121409 Approvals Approvals Approvals CSA / IECEE CB Scheme / EAC / cULus Recognized / VDE Zeichengenehmigung Ex Approvals Approval details CSA http://www.csagroup.org/services-industries/product-listing/ 13631 B D Nominal voltage UN 300 V 300 V Nominal current IN 10 A 10 A

https://www.phoenixcontact.com/pi/products/1806122 09/12/2020 Page 9 / 12 Printed-circuit board connector - FRONT-GMSTB 2,5/ 3- ST-7,62 - 1806122 Approvals B D mm²/AWG/kcmil 22-12 22-12 IECEE CB Scheme http://www.iecee.org/ DE1-60988-B1B2 Nominal voltage UN 400 V Nominal current IN 12 A mm²/AWG/kcmil 0.34-2.5 EAC B.01687 cULus Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E60425-19931013 B D Nominal voltage UN 300 V 300 V Nominal current IN 15 A 10 A mm²/AWG/kcmil 30-12 30-12 VDE Zeichengenehmigung http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx 40050646 Nominal voltage UN 400 V Nominal current IN 12 A mm²/AWG/kcmil 0.34-2.5 Accessories Accessories Assembly tool Accessories - FRONT-MSTB-EW - 1763058 Removal aid, for FRONT-MSTB, facilitates extraction of several plugs mounted behind each other

https://www.phoenixcontact.com/pi/products/1806122 09/12/2020 Page 10 / 12 Printed-circuit board connector - FRONT-GMSTB 2,5/ 3- ST-7,62 - 1806122 Accessories Bridge Insertion bridge - EBP 2- 5 - 1733169 Insertion bridge for connectors with 5.0 mm or 5.08 mm pitch Coding element Coding profile - CP-MSTB - 1734634 Coding profile, is inserted into the slot on the plug or inverted header, red insulating material Labeled terminal marker Marker card - SK 7,62/3,8:FORTL.ZAHLEN - 0804549 type: adhesive, for terminal block width: 7.62 mm, lettering field size: 7.62 x 3.8 mm Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip Additional products

https://www.phoenixcontact.com/pi/products/1806122 09/12/2020 Page 11 / 12 Printed-circuit board connector - FRONT-GMSTB 2,5/ 3- ST-7,62 - 1806122 Accessories Feed-through header - GMSTB 2,5/ 3-G-7,62 - 1766136 PCB headers, nominal current: 12 A, rated voltage (III/2): 630 V, nominal cross section: 2.5 mm², number of positions: 3, pitch: 7.62 mm, color: green, contact surface: Tin, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.2 mm Feed-through header - GMSTBA 2,5/ 3-G-7,62 - 1766246 PCB headers, nominal current: 12 A, rated voltage (III/2): 630 V, nominal cross section: 2.5 mm², number of positions: 3, pitch: 7.62 mm, color: green, contact surface: Tin, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.2 mm Feed-through header - GMSTBV 2,5/ 3-G-7,62 - 1766576 PCB headers, nominal current: 12 A, rated voltage (III/2): 630 V, nominal cross section: 2.5 mm², number of positions: 3, pitch: 7.62 mm, color: green, contact surface: Tin, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.9 mm Feed-through header - GMSTBVA 2,5/ 3-G-7,62 - 1766783 PCB headers, nominal current: 12 A, rated voltage (III/2): 630 V, nominal cross section: 2.5 mm², number of positions: 3, pitch: 7.62 mm, color: green, contact surface: Tin, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.9 mm Feed-through header - GMSTBA 2,5/ 3-G-7,62 PIN 9,5 - 1883721 PCB headers, nominal current: 12 A, rated voltage (III/2): 630 V, nominal cross section: 2.5 mm², number of positions: 3, pitch: 7.62 mm, color: green, contact surface: Tin, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 9.5 mm, Pin length: 9.5 mm

32825 Blomberg

Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com

Product Information

1806122 specifications and overview.

Summary

Printed-circuit board connector - FRONT-GMSTB 2,5/ 3-ST-7,62 09/12/2020

Description

Printed-circuit board connector - FRONT-GMSTB 2,5/ 3-ST-7,62 09/12/2020

Source title 1806122 Datasheet(PDF) - PHOENIX CONTACT

Related Parts

More parts from the same family.

Browse manufacturer