1618763 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

https://www.phoenixcontact.com/pi/products/1618763 09/11/2020 Page 1 / 10 Panel feed-through - ST-3ES1N8ACK03S - 1618763 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Panel feed-through, straight, SPEEDCON locking, M17, number of positions: 3+PE, type of contact: Socket, Flat gasket, 4x Ø 3.2, shielded: yes, flange dimensions: 25.75 mm x 25.75 mm, cable diameter range: 5 mm ... 9 mm, number of positions: 4, connection method: Crimp connection Your advantages Reduced size: ideal for compact devices Consistent EMC protection for reliable connection solutions in the industrial environment Crimping connection: vibration- and temperature-resistant assembly Flexible use: reliably connect various cable diameters User-specific, suitable for front and rear mounting Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356817257 Technical data General Note Order information: Order crimp contacts Ø 2 mm separately Type of locking SPEEDCON locking Direction of rotation of contact chamber numbering Standard Coding N Contact connection method Crimp connection Type of contacts Socket Number of positions 4 Contact diameter of power contacts 2 mm Rated current for power contacts 25 A Contact diameter of signal contacts 2 mm Conductor entry 5 mm ... 9 mm

https://www.phoenixcontact.com/pi/products/1618763 09/11/2020 Page 2 / 10 Panel feed-through - ST-3ES1N8ACK03S - 1618763 Technical data General Pg housing screw connection none Mounting type 4x Ø 3.2 Ambient conditions Ambient temperature -40 °C ... 125 °C Degree of protection IP67 Specifications according to DIN EN 61984:2001 Nominal / operating voltage of power contacts 630 V Rated surge voltage of power contacts 6 kV Overvoltage category of power contacts III Degree of pollution of power contacts 3 Standards and Regulations Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that the protective or functional ground has been properly connected. applicable when combining several circuits in a cable and/or connector
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Operate the connector only when it is fully plugged in and interlocked.
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.

https://www.phoenixcontact.com/pi/products/1618763 09/11/2020 Page 3 / 10 Panel feed-through - ST-3ES1N8ACK03S - 1618763 Technical data Standards and Regulations

  • Observe the minimum bending radius of the cable. Lay the cable without twisting it.
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings

https://www.phoenixcontact.com/pi/products/1618763 09/11/2020 Page 4 / 10 Panel feed-through - ST-3ES1N8ACK03S - 1618763 Dimensional drawing Installation dimensions

https://www.phoenixcontact.com/pi/products/1618763 09/11/2020 Page 5 / 10 Panel feed-through - ST-3ES1N8ACK03S - 1618763 Schematic diagram

https://www.phoenixcontact.com/pi/products/1618763 09/11/2020 Page 6 / 10 Panel feed-through - ST-3ES1N8ACK03S - 1618763 Schematic diagram Connector pin assignment

https://www.phoenixcontact.com/pi/products/1618763 09/11/2020 Page 7 / 10 Panel feed-through - ST-3ES1N8ACK03S - 1618763 Diagram I = current strength, ϑ = ambient temperature, 3x 25 A Dimensional drawing Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27260700 eCl@ss 4.1 27260700 eCl@ss 5.0 27260700 eCl@ss 5.1 27260700

https://www.phoenixcontact.com/pi/products/1618763 09/11/2020 Page 8 / 10 Panel feed-through - ST-3ES1N8ACK03S - 1618763 Classifications eCl@ss eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002635 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 39121413 UNSPSC 18.0 39121413 UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approval details UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 335019 Nominal voltage UN 600 V Nominal current IN 15 A mm²/AWG/kcmil 14

https://www.phoenixcontact.com/pi/products/1618763 09/11/2020 Page 9 / 10 Panel feed-through - ST-3ES1N8ACK03S - 1618763 Approvals cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 335019 Nominal voltage UN 600 V Nominal current IN 15 A mm²/AWG/kcmil 14 EAC B.01687 cULus Recognized Accessories Accessories Crimp contact Crimp contact - ST-20KS010 - 1607657 Crimp contact, turned, contact diameter: 2 mm, crimp range: 0.25 mm² ... 1 mm² Crimp contact - ST-20KS020 - 1607658 Crimp contact, turned, Single contact, contact diameter: 2 mm, crimp range: 1 mm² ... 2.5 mm² Mounting material Color-coding - ST-Z0016 - 1617993 Color-coding, color: green

https://www.phoenixcontact.com/pi/products/1618763 09/11/2020 Page 10 / 10 Panel feed-through - ST-3ES1N8ACK03S - 1618763 Accessories Color-coding - ST-Z0017 - 1618049 Color-coding, color: orange Color-coding - ST-Z0018 - 1618050 Color-coding, color: black Protective cover Protective cap - ST-Z0023 - 1621049 Plastic protection cap for connectors with M17 compact external thread Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8

32825 Blomberg

Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com