1615687

1615687 PHOENIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 12

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector front mounting, straight, Screw locking mechanism, M58, number of positions: 4+3+PE, contact connection type: Pin, Axial O-ring, 4x Ø 5,4, shielded: yes, flange dimensions: 60 mm x 60 mm, degree of protection: IP67, number of positions: 8, connection method: Crimp connection, series: SL Your advantages Consistent EMC protection for reliable connection solutions in the industrial environment• Crimping connection: vibration- and temperature-resistant assembly Reliable transmission of high electrical power Commercial data Item number 1615687 Packing unit 1 pc Minimum order quantity 1 pc Sales key AB32 Product key ABRBHL Catalog page Page 174 (C-2-2019) GTIN 4046356459761 Weight per piece (including packing) 335.8 g Weight per piece (excluding packing) 324.4 g Customs tariff number 85366990 Country of origin DE SL-7EPWN8AWA00 - Device connector front mounting 1615687 https://www.phoenixcontact.com/us/products/1615687 Feb 13, 2024, 7:28 AM Page 1 (12)

General Order crimp contacts 4 x Ø 1.6 mm, 4 x Ø 10 mm separately Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting Safety note SL-7EPWN8AWA00 - Device connector front mounting 1615687 https://www.phoenixcontact.com/us/products/1615687 Feb 13, 2024, 7:28 AM Page 2 (12)

warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting 4x Ø 5,4 Connection method Crimp connection Product properties Product type Circular connectors (device side) Number of positions 8 Connection profile 4+3+PE Application Power Series SL Shielded yes Coding N Thread type M58 Dimensions Housing Flange dimensions 60 mm x 60 mm Material specifications Seal material FPM Housing material Aluminum Electrical properties Contact Contact diameter 10 mm Max. current 150 A Nominal voltage UN 630 V Overvoltage category III Degree of pollution 3 Rated surge voltage 6 kV Contact Contact diameter 1.6 mm Max. current 12 A Nominal voltage UN 250 V Overvoltage category III Degree of pollution 3 Rated surge voltage 4 kV Connection data Conductor connection Connection method Crimp connection SL-7EPWN8AWA00 - Device connector front mounting 1615687 https://www.phoenixcontact.com/us/products/1615687 Feb 13, 2024, 7:28 AM Page 3 (12)

Contact connection type Pin Connector Type straight Connection 1 Head design Pin Environmental and real-life conditions Ambient conditions Degree of protection IP67 Ambient temperature (operation) -40 °C ... 120 °C Altitude 2000 m SL-7EPWN8AWA00 - Device connector front mounting 1615687 https://www.phoenixcontact.com/us/products/1615687 Feb 13, 2024, 7:28 AM Page 4 (12)

Drilling plan/solder pad geometry Ø38,7 - Ø48 45,2±0,1 4xM Installation dimensions Dimensional drawing M58x2 Ø4x5,4 45,2 100 Dimensional drawing SL-7EPWN8AWA00 - Device connector front mounting 1615687 https://www.phoenixcontact.com/us/products/1615687 Feb 13, 2024, 7:28 AM Page 5 (12)

0 10 20 30 40 50 60 70 80 90 100 110 120130 I [A]  [°C] = 3x50 mm I = current strength, T = ambient temperature SL-7EPWN8AWA00 - Device connector front mounting 1615687 https://www.phoenixcontact.com/us/products/1615687 Feb 13, 2024, 7:28 AM Page 6 (12)

ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 SL-7EPWN8AWA00 - Device connector front mounting 1615687 https://www.phoenixcontact.com/us/products/1615687 Feb 13, 2024, 7:28 AM Page 7 (12)

Environmental product compliance REACh SVHC Lead 7439-92-1 Environmentally Friendly Use Period = 50 yearsChina RoHS For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” SL-7EPWN8AWA00 - Device connector front mounting 1615687 https://www.phoenixcontact.com/us/products/1615687 Feb 13, 2024, 7:28 AM Page 8 (12)

SL-1CKP010 - Crimp contact 1607911 https://www.phoenixcontact.com/us/products/1607911 Crimp contact, Pin, turned, contact diameter: 10 mm, crimp range: 10 mm2 ... 10 mm2, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1362824 SL-1CKP020 - Crimp contact 1607912 https://www.phoenixcontact.com/us/products/1607912 Crimp contact, Pin, turned, contact diameter: 10 mm, crimp range: 16 mm2 ... 16 mm2, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1362825 SL-7EPWN8AWA00 - Device connector front mounting 1615687 https://www.phoenixcontact.com/us/products/1615687 Feb 13, 2024, 7:28 AM Page 9 (12)

SL-1CKP030 - Crimp contact 1607913 https://www.phoenixcontact.com/us/products/1607913 Crimp contact, Pin, turned, contact diameter: 10 mm, crimp range: 25 mm2 ... 25 mm2, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1362827 SL-1CKP040 - Crimp contact 1607914 https://www.phoenixcontact.com/us/products/1607914 Crimp contact, Pin, turned, contact diameter: 10 mm, crimp range: 35 mm2 ... 35 mm2, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1362828 SL-7EPWN8AWA00 - Device connector front mounting 1615687 https://www.phoenixcontact.com/us/products/1615687 Feb 13, 2024, 7:28 AM Page 10 (12)

SL-1CKP050 - Crimp contact 1607915 https://www.phoenixcontact.com/us/products/1607915 Crimp contact, Pin, turned, contact diameter: 10 mm, crimp range: 50 mm2 ... 50 mm2, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1362829 SL-16KP010 - Crimp contact 1607909 https://www.phoenixcontact.com/us/products/1607909 1 mm2, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1242372 SL-7EPWN8AWA00 - Device connector front mounting 1615687 https://www.phoenixcontact.com/us/products/1615687 Feb 13, 2024, 7:28 AM Page 11 (12)

https://www.phoenixcontact.com/us/products/1607926 Plastic protection cap for connectors with M58 external thread Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SL-7EPWN8AWA00 - Device connector front mounting 1615687 https://www.phoenixcontact.com/us/products/1615687 Feb 13, 2024, 7:28 AM Page 12 (12)