DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
- Plastic package has Underwriters Laboratory Flammability Classification 94V-O * Glass passivated chip junction in DO-201 package * 1500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: typically less than 1.0 ps from 0 volts to BV min * Typical IR less than 1μA above 10V * High temperature soldering guaranteed: 260 /10 seconds/.375”,(9.5mm) lead length/5lbs., (2.3kg) tension Case: JEDEC DO-201AD molded plastic Terminals: Axial leads, solderable per MIL-STD-202, Method 208 Polarity: Color band denoted cathodeWe declare that the material of product compliance except Bipolarwith ROHS requirements Mounting Position: Any Weight: 0.04 ounce, 1.12 gram Ratings at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOLVALUEUNITS PPPM Minimum 1500Watts PM(AV) 6.5Watts IFSM 200Amps TJ -55 to +150 °C TSTG -55 to +175 °C NOTES: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25°Cper Fig. 2. 2. Mounted on Copper Leaf area of 1.57in2(40mm2). 3. 8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum. Operating Temperature Range DEVICES FOR BIPOLAR APPLICATIONS RATING Peak Power Dissipation at TA=25°C, TP=1ms(Note 1) Steady State Power Dissipation at TL=75°C Lead Lengths .375”,(9.5mm) (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine- Wave Superimposed on Rated Load(JECED Method) (Note 3) 1.5KE ***Series GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 6.8 TO 440 Volts Feature 1500Watt Peak Power 6.5 Watt Steady State 2.Mechanical Data Storage Temperature Range 1.Electrical Characteristic For Bidirectional use C or CA Suffix for types 1.5KE6.8 thru types 1.5KE440 Electrical characteristics apply in both directions.marking code is all type.
UNI-REVERSEBREAKDOWNBREAKDOWNTESTMAXIMUMREVERSE DIRECTIONALSTAND-OFFVOLTAGEVOLTAGECURRENTCLAMPINGLEAKAGE PARTVOLTAGEVBR (V)VBR (V)ITVOLTAGE@VRWM NUMBERVRWM (V)MIN. @ITMAX. @IT(mA)@IPP VC (V)IR (uA) 1.5KE108.191111510 1.5KE1310.511.714.31191 1.5KE1512.113.516.51221 1.5KE2016.21822129.11 1.5KE20A17.11921127.71 1.5KE3024.32733143.51 1.5KE3629.132.439.61521 1.5KE39A33.337.141153.91 1.5KE56A47.853.258.81771 1.5KE6250.255.868.21891 1.5KE62A5358.965.11851 1.5KE6855.161.274.81981 1.5KE68A58.164.671.41921 1.5KE*** Series
UNI-REVERSEBREAKDOWNBREAKDOWNTESTMAXIMUMREVERSE DIRECTIONALSTAND-OFFVOLTAGEVOLTAGECURRENTCLAMPINGLEAKAGE PARTVOLTAGEVBR (V)VBR (V)ITVOLTAGE@VRWM NUMBERVRWM (V)MIN. @ITMAX. @IT(mA)@IPP VC (V)IR (uA) 1.5KE7560.767.582.511081 1.5KE75A64.171.378.811031 1.5KE8266.473.890.211181 1.5KE82A70.177.986.111131 1.5KE9173.781.910011311 1.5KE91A77.886.595.511251 1.5KE100819011011441 1.5KE100A85.59510511371 1.5KE11089.29912111581 1.5KE110A9410511611521 1.5KE12097.210813211731 1.5KE120A10211412611651 1.5KE13010511714311871 1.5KE130A11112413711791 1.5KE15012113516512151 1.5KE150A12814315812071 1.5KE16013014417612301 1.5KE160A13615216812191 1.5KE17013815318712441 1.5KE170A14516217912341 1.5KE18014616219812581 1.5KE180A15417118912461 1.5KE20016218022012871 1.5KE200A17119021012741 1.5KE22017519824213441 1.5KE220A18520923113281 1.5KE25020222527513601 1.5KE250A21423726313441 1.5KE30024327033014301 1.5KE300A25628531514141 1.5KE35028431538515041 1.5KE350A30033236814821 1.5KE40032436044015741 1.5KE400A34238042015481 1.5KE44035639648416311 1.5KE440A37641846216001 1.5KE48038943252816861 1.5KE480A40845650416581 1.5KE51041345956117291 1.5KE510A43448553516981 1.5KE550 445495605 17911 1.5KE550A 467523577 17601 NOTES: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25°Cper Fig. 2. 2. Mounted on Copper Leaf area of 1.57in2(40mm2). 3. 8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum. 1.5KE*** Series
- Characteristic Curves ( TA = 25°C unless otherwise noted ) 1.5KE ***Series Fig. 1-Peak Pulse Power Rating CurveFig. 2-Pulse Derating Curve Fig. 3-Pulse Waveform Fig. 4-Typical Junction Capacitance Unidirectional Fig. 5-Steady State Power Derating Curve Fig. 6-Maximum Non-Repetitive Peak Forward Surge Current Uniderictional PPPM, Peak Pulse Power,KW Peak Pulse Power(PPP) or current(IPP) Derating in percentage % IPPM, Peak Pulse Current % Cj, Capacitance,pF Pm(AV) Steady State Power Dissipation,Watts IFSM, Forward Surge Current,Amperes 100 1.0 0.1 0.1 1.0 10 100 1000 10000 td,Pulse Width,μsec TA,Ambient Temperature,°C 0 25 50 100 125 150 175 200 100 150 t,Time,ms 0 1.0 2.0 3.0 10000 1000 100 1.0 10 100 1000 V(WM),Reverse Stand-off Voltage,Voltage 5.00 3.00 4.00 2.00 1.00 0.00 TL,Lead Temperature,°C 0 25 50 75 100 125 150 175 200 1 10 100 Number of Cycles At 60 Hz 250 200 100 Non-Repetive Pulse Waveform Shown in Fig.3 TA=25°C tf=10μs Peak Value Ippm Half Value Ipp/2=td TA=25℃ Test Waveform tf=10μs td=1000μs TJ = 25°C f = 1.0 MHz Vsig = 50mVp-p meansured at stand-off voltage VWM meansured at Zero Bias 0.375"(9.5mm) 20mm*20mm*1mm TJ = TJ max 8.3ms Single Half Sine-wave (JEDEC Method) 10/1000μs Waveform as deffused by R.E.A 100
- dimension: 1.5KE ***Series
标题: 1.1. 弹带盒规格 ammo spec. 单位：mm LWH T52 262±276± 290± 2 T42 262±264± 290± 2 T26250 ±345± 395± 3 1.2 弹带内盒要求 inner box spec. 文件编号： WI-250 塑封生产线轴向产品包装规范 第 4 版 第 0 次修改 1 弹带盒装 ammo and box 第 1 页 LRC标签 labelROHS标签 label
标题: 1.4 标签要求 label spec.
1.4.1 LRC标签 LRC label
成型规格forming spec. 1.4.2环保标签 environmental protection label 2.外箱规格 cartoon spec. 单位：mm LWH T52 430±2280± 2225± 2 T42 410±2285± 2300± 2 T26 435±3280± 3295± 3 3 按以上包装方式，编带数量和外包装箱产品数量：typing and cartoon spec. R-3DO-15 1.8K 2K(T52) 1.8K(T26) 18K 20K 36K 36K 32.4K36K外箱数量（T42编带） quantity/cartoon 54K- 外箱数量（T26编带） quantity/cartoon 60K- 每根编带数量 quantity/ammo 3K0.8K 外箱数量（T52编带） quantity/cartoon 30K8.0K 文件编号： WI-250 塑封生产线轴向产品包装规范 第 4 版 第 0 次修改 第 2 页 塑封外型 A-405 & DO-41 & R-1DO-201AD L W H 外箱标签cartoon label LRC产品型号 type ** ** 产品重复峰压值 peak repetive voltage 产品额定电流值 average output current 产品数量 quantity
标题: 4 编带规格 brede spec 26/tape35/tape40/tape42/tape52/tape52/tape# 注: 52编带# 为DO-201AD编带规格 "52编带#" just for D0-201AD 1. 红白编带厚度为0.05mm；两种胶带各自之间无明显色差；编带要求均为胶带。 The typing thickness is 0.05mm and color is obvious difference 2. 两端引带20~40cm. Typing lead over 20~40cm 3. 红色编带一端为二极管“负极”；白色编带一端为二极管“正极”。 red color is cathode ,white color is anode 4. 无卤 green epoxy compound（无卤产品才贴HF only） 尺寸代号 编带尺寸 typing dimension 第 3 页 文件编号： WI-250 塑封生产线轴向产品包装规范 第 4 版 第 0 次修改 Green
- Update Record 版次更新作者更新日期 1 周杰 2010-5-4 2 周杰 2010-9-23 3 周杰 2011-6-18 4 周杰 2012-5-9 5 周杰 2012-8-15调整结电容曲线 具体说明产品印字为产品名称。 增加包装规范 调整储存温度为175度 更新记录 第一版 1.5KE ***Series