15DPW GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 3 15DPW – Rev. 2016-1.0 Specifications subject to change without notice. 15DPW Series 15W - Single/Dual Output - Wide Input - Isolated & Regulated DC-DC Converter Wide 2:1 input voltage range Isolation Voltage: 1.6KVDC Operating Temperature Range: -40°C to +85°C Short circuit protection (SCP) Remote On/Off No minimum load required High efficiency up to 91% 15W DIL-24 package Meet EN55022, Class A (Radiation) RoHS Compliant Over voltage protection Over load protection Customer Design Available DC-DC Converter 15 Watt The 15DPW Series are high performance isolated 15W DC/DC conver - ters. Designed with high efficiency, they allow the operating temperature range of these units to be -40°C to +85°C with industry-standard foot - print. Further features include wide 2:1 input voltage range, remote on/ off control, short-circuit protection and over voltage protection. These converters are well suitable for battery operated equipment, mea - surement equipment, telecom, wireless network and industry control systems. Everywhere where isolated, tightly regulated voltages and com - pact size are required. Model selection: WCTV_xxyyN## W= Watt; C= Case; T= Type; V= Voltage Variation (omitted ± 10%); xx= Vin; yy= Vout; N= Numbers of Output; ##= Isolation (kVDC) Example: 15DPW_2415S1.6 15= 15Watt; D= DIP; P= series; W= wide input (2:1) 18-36Vin; 15Vout; S= single output; 1.6= 1600VDC Common specifications Short circuit protection: Continuous, automatic recovery Cooling: Free air convection Operation temperature range: -40°C~+85°C Storage temperature range: -55°C~+125°C Maximum case temperature: 105°C Solding temperature: 260°C MAX, 1.5mm from case for 10sec Switching frequency: 250-330kHz TYP Storage humidity range: 95% MAX Radiated emissions: EN55022/Class A Safety standard: IEC 60950-1 Case material: Nickel coated copper with no-conductive base Potting material: Epoxy (UL94V-0) MTBF (MIL-HDBK-217F @25°C): >460,000 hours Weight: 20g Isolation specifications Item Test condition Min Typ Max Units Isolation voltage Input to output 1600 VDC Isolation resistance Test at 500VDC 1000 MΩ Isolation capacitance 2000 pF Input specifications Item Test condition Min Typ Max Units Input filter Pi Type Protection Fuse recommended Input surge voltage (100ms max.)

  • Nominal input (12V)
  • Nominal input (24V)
  • Nominal input (48V) 100 VDC VDC VDC Input reflected ripple* current Nominal Vin and full load 20 mApk- pk Start-up time Nominal Vin and constant resistive load 20 ms Remote ON/OFF (referenced to -Vin, pin 2 and pin 3)
  • Converter: ON
  • Converter: OFF
  • OFF idle current 3.0V<Vr<12V or open circuit 0V<Vr<1.2V or short circuit pin 1 and pin 2/3 5mA Sourcing current of remote control pin Nominal Vin <0.2 mA Idle input current (at Remote OFF state) Nominal Vin <2.5 mA * see recommended test circuit Output specifications Item Test condition Min Typ Max Units Minimum load 10% of full load Voltage accuracy ±1 % Line regulation • Single
  • Dual ±0.2 ±0.5 Load regulation • Single
  • Dual (balanced load) ±0.5 Cross regulation Dual (25% to 100% load) ±5 % Ripple and noise 20MHz Bandwidth 60 Vpk-pk Over voltage protection (Zener diode clamp)
  • 3.3V output
  • 5.1V output
  • 12V output
  • 15V output
  • ±5V output
  • ±12V output
  • ±15V output 3.9 6.2 ±6.2 ±15 ±18 V V V V V V V Over current protection of F.L. 150 % Transient recovery time 25% load step change 250 µs Transient response deviation normal Vin, 25% load step change ±3 % Temperature coefficient ±0.02 %/°C Note: 1. Only typical model listed. Non-standard models will be different from the above, please contact us for more details. 2. All specifications are typical at nominal input, full load and 25°C unless otherwise stated. 3. In this datasheet, all the test methods of indications are based on corporate standards.

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 3 15DPW – Rev. 2016-1.0 Specifications subject to change without notice. 15DPW Series 15W - Single/Dual Output - Wide Input - Isolated & Regulated DC-DC Converter Typical characteristics Temperature derating curve Part Number Input Voltage [VDC] Range Input Current [mA, Typ.] No load Full load Output Voltage [VDC] Output Current [mA] Full load Efficiency [%, typ.] Capacitor load [µF, max.] 15DPW_1203S1.6 9-18 15 1309 3.3 4000 86 4700 15DPW_1205S1.6 9-18 15 1465 5.1 3000 89 3300 15DPW_1212S1.6 9-18 15 1436 12 1250 89 600 15DPW_1215S1.6 9-18 15 1420 15 1000 90 400 15DPW_2403S1.6 18-36 10 647 3.3 4000 87 4700 15DPW_2405S1.6 18-36 10 732 5.1 3000 89 3300 15DPW_2412S1.6 18-36 10 710 12 1250 90 600 15DPW_2415S1.6 18-36 10 702 15 1000 91 400 15DPW_4803S1.6 36-75 5 327 3.3 4000 86 4700 15DPW_4805S1.6 36-75 5 370 5.1 3000 88 3300 15DPW_4812S1.6 36-75 5 359 12 1250 89 600 15DPW_4815S1.6 36-75 5 359 15 1000 89 400 15DPW_1205D1.6 9-18 15 1488 ±5 ±1500 86 ±1500 15DPW_1212D1.6 9-18 15 1420 ±12 ±625 90 ±288 15DPW_1215D1.6 9-18 15 1420 ±15 ±500 90 ±200 15DPW_2405D1.6 18-36 10 744 ±5 ±1500 86 ±1500 15DPW_2412D1.6 18-36 10 710 ±12 ±625 90 ±288 15DPW_2415D1.6 18-36 10 710 ±15 ±500 90 ±200 15DPW_4805D1.6 36-75 5 372 ±5 ±1500 86 ±1500 15DPW_4812D1.6 36-75 5 359 ±12 ±625 89 ±288 15DPW_4815D1.6 36-75 5 355 ±15 ±500 90 ±200 EMC specifications EMI CE EN55022 CLASS A EMI RE EN55022 CLASS A EMS ESD IEC61000-4-2 perf. Criteria B EMI RS IEC61000-4-3 perf. Criteria A EMI* EFT IEC61000-4-4 perf. Criteria B EMS* Surge IEC61000-4-5 perf. Criteria B EMI CS IEC61000-4-6 perf. Criteria A EMS PFMF IEC61000-4-8 perf. Criteria A * An external filter capacitor is required if the module has to meet IEC61000-4-4 and IEC61000-4-5. The filter capacitor suggest: Nippon chemicon KY series, 2pcs 330uF/100V paraller construction or 680uF/100V. Save Operating Area

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 3 15DPW – Rev. 2016-1.0 Specifications subject to change without notice. 15DPW Series 15W - Single/Dual Output - Wide Input - Isolated & Regulated DC-DC Converter Mechanical dimensions Note: Unit: mm[inch] Pin diameter: 0.5 ±0.5mm [0.02 ±0.02inch] Pin pitch and length tolerance: ±0.3mm [±0.014inch] Case tolerance: ±0.5mm [±0.02inch] Stand-off tolerance: ±0.1mm [±0.004inch] 15DPW_1.6 PIN connection PIN 1 2, 3 9 11 14 16 22, 23 Single Remote on/off -Vin NP NC +Vout -Vout +Vin Dual Remote on/off -Vin Common -Vout +Vout Common +Vin Recommended test circuit Input reflected ripple current test step Input reflected ripple current is measured through a source inductor Lin (12uH) and a source capacitor Cin (47uF, ESR<1.0Ω at 100KHz) ar nomial input and full load. Output ripple & noise measurement test Use a capacitor Cout (1.0uF) measurement. The scope measurement bandwidth is 0-20MHz.