15DMWE4_2424D1.5

15DMWE4 GAPTEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 5 15DMWE4_D1.5 – Rev. 2019-1.1 Specifications subject to change without notice. 15DMWE4_D1.5 Series 15W - Single Output - Wide Input - Isolated & Regulated 1“ x 1“ DC-DC Converter DC-DC Converter 15 Watt The 15DMWE4_1.5 series are isolated 15W DC/DC converters with 2:1 in - put voltage. They feature efficiency up to 91%, 1500VDC isolation, ope - rating temperature of -40°C to +105°C, input under-voltage protection, output over-voltage, output over-current, output short circuit protec - tion and EMI meets CISPR32/EN55032 CLASS A. They are widely applied in industrial control, electric power, instru - ments and communication fields. Extension packages with wiring mounting and rail mounting also enable them with reverse voltage pro - tection. Example: 15DMWE4_2415D1.5 15= 15Watt; D= DIP; M= series; W4= wide input (4:1); E= cost effective; 9-36Vin; ±15Vout; D= dual output; 1.5= 1500VDC Common specifications Short circuit protection: Continuous, self-recovery Cooling: Free air convection Operation temperature range: -40°C~+105°C (see temperature derating curve) Storage temperature range: -55°C~+125°C Storage humidity range: 95% MAX Lead temperature: 300°C MAX, 1.5mm from case for 10 sec Vibration: 10-150Hz, 5G, 0.75mm. along X, Y and Z Case material: Aluminium alloy MTBF (MIL-HDBK-217F @25°C): 1,000,000 hours Weight: 15g / 35g (wiring) / 55g (rail) Isolation specifications Item Test condition Min Typ Max Units Isolation voltage Input to output 1500 VDC Isolation voltage Input to output, respectively on the shell

1000 VDC

Isolation resistance Test at 500VDC 1000 MΩ Isolation capacitance Input-output, 100KHz/0.1V 2000 pF Input specifications Item Test condition Min Typ Max Units Input current* (full load/no load)

• 24VDC
• 48VDC -/20 -/11 mA mA Reflected ripple current Nominal input series 30 mA Surge voltage • 24VDC input
• 48VDC input -0.7 -0.7 100 VDC VDC Starting voltage • 24VDC input
• 48VDC input VDC VDC Input under- voltage protection
• 24VDC input
• 48VDC input 5.5 6.5 15.5 VDC VDC Starting time 10 ms Input filter Pi Type Hot plug Unavailable Switching frequency PWM mode 270 KHz Ctrl (The voltage of Ctrl pin is relative to input pin GND)
• Module switch on
• Module switch off
• Input current when switched off Ctrl suspended or connected to TTL high level (3.5-12VDC) Ctrl pin connected to GND or low level (0-1.2VDC) 2 7 mA * Nominal input series, nominal input voltage Output specifications Item Test condition Min Typ Max Units Voltage accuracy* 5%-100% load ±1 ±3 % Line regulation Full load, low to high
• positive output
• negative output ±0.2 ±0.4 ±0.5 Load regulation 5% load to full load ±0.5 ±1 % Cross regulation Dual output, main circuit with 50% load, auxiliary circuit with 10%-100% load ±5 % Transient recovery time 25% load step change 300 500 µs Transient respon- se deviation 25% load step change
• 5V output
• Others Temperature drift Full load ±0.03 %/°C Ripple and noise* 20MHz Bandwidth 100 200 mVp-p Over current protection Input voltage range 110 200 270 %Io Over voltage protection Input voltage range 110 160 %Vo * At 0%-5% load, the Max. output voltage accuracy converter is ±5%. ** 0%-5% load ripple&noise is no more than 5%Vo. Ripple and noise are measured by “parallel cable” method. Wide 4:1 input voltage range High efficiency up to 90% Short circuit protection (SCP) Isolation voltage: 1.5K VDC Over-current, over-voltage, under-voltage protection RoHS compliant Operating temperature range: -40°C to +105°C Meet CISPR32/EN55032 CLASS A, no external components International standard pin-out Wiring and rail mounting products featuring anti- reverse connection for input Meets EN62368 standards (pending)

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 5 15DMWE4_D1.5 – Rev. 2019-1.1 Specifications subject to change without notice. 15DMWE4_D1.5 Series 15W - Single Output - Wide Input - Isolated & Regulated 1“ x 1“ DC-DC Converter Part Number Input Voltage [VDC] Nominal Range* Max Output Voltage [VDC] Output Current [mA] Full load Efficiency [%, Typ.]* Capacitive load [µF, Max.] 15DMWE4_2405D1.5 24 9-36 40 ±5 ±1500 87 1500 15DMWE4_2412D1.5 24 9-36 40 ±12 ±625 90 470 15DMWE4_2415D1.5 24 9-36 40 ±15 ±500 90 330 15DMWE4_2424D1.5 24 9-36 40 ±24 ±312 89 200 15DMWE4_4805D1.5 48 18-75 80 ±5 ±1500 86 1500 15DMWE4_4812D1.5 48 18-75 80 ±12 ±625 90 470 15DMWE4_4815D1.5 48 18-75 80 ±15 ±500 90 330 15DMWE4_4824D1.5 48 18-75 80 ±24 ±312 90 200 * The minimum input voltage and starting voltage of wring or rail models are 1VDC higher than those of DIP package due to input reverse polarity protection function. Absolute maximum rating without damage on the converter, but it isn‘t recommended. * Efficiency is measured in nominal input voltage and rated output load; for wiring and rail mounting models, due to input reverse polarity protection, a minimum efficiency greater than Min.-2 is qualified. Typical characteristics EMC specifications EMI CE CISPR32/EN55032 CLASS A (without external components) CLASS B (see EMC solution recommended circuit, ②) EMI RE CISPR32/EN55032 CLASS A (without external components) CLASS B (see EMC solution recommended circuit, ②) EMS ESD IEC/EN61000-4-2 Contact ±4KV perf. Criteria B EMS RS IEC/EN61000-4-3 10V/m perf. Criteria A EMS EFT IEC/EN61000-4-4 ±2KV (see EMC solution recommended circuit, ①) perf. Criteria B EMS Surge IEC/EN61000-4-5 line to line ±2KV (see EMC solution recommended circuit, ①) perf. Criteria B EMS CS IEC/EN61000-4-6 3 Vr.m.s perf. Criteria A

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 5 15DMWE4_D1.5 – Rev. 2019-1.1 Specifications subject to change without notice. 15DMWE4_D1.5 Series 15W - Single Output - Wide Input - Isolated & Regulated 1“ x 1“ DC-DC Converter Efficiency 15DMWE4_2405D1.5 15DMWE4_2415D1.5 15DMWE4_2415D1.5 15DMWE4_2405D1.5 Typical application EMC solution-recommended circuit All the DC/DC converters of this series are tested according to the recommended circuit before delivery. If it is required to further reduce input and output ripple, properly increase the input & output of additional capacitors Cin and Cout or select capacitors of low equivalent impedance provided that the capacitance is no larger than the max. capacitive load of the product. Refer to the Cout in typical application It is not allowed to connect modules output in parallel to enlarge the power.

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 4 of 5 15DMWE4_D1.5 – Rev. 2019-1.1 Specifications subject to change without notice. 15DMWE4_D1.5 Series 15W - Single Output - Wide Input - Isolated & Regulated 1“ x 1“ DC-DC Converter Mechanical dimensions and footprint Wiring mounting

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 5 of 5 15DMWE4_D1.5 – Rev. 2019-1.1 Specifications subject to change without notice. 15DMWE4_D1.5 Series 15W - Single Output - Wide Input - Isolated & Regulated 1“ x 1“ DC-DC Converter Rail mounting Note: 1. Only typical model listed. Non-standard models will be different from the above, please contact us for more details. 2. All specifications are measured at TA=25°C, humidity<75%, nominal input volta- ge and rated output load unless otherwise specified. 3. In this datasheet, all the test methods of indications are based on corporate standards.