15DMWE_1.5

15DMWE GAPTEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 6 15DMWE_1.5 – Rev. 2018-1.0 Specifications subject to change without notice. 15DMWE_1.5 Series 15W - Single Output - Wide Input - Isolated & Regulated 1“ x 1“ DC-DC Converter DC-DC Converter 15 Watt The 15DMWE_1.5 series are isolated 15W DC/DC converters with 2:1 input voltage. They feature efficiency up to 91%, 1500VDC isolation, operating temperature of -40°C to +105°C, input under-voltage protection, output over-voltage, output over-current, output short circuit protection and EMI meets CISPR32/EN55032 CLASS A. They are widely applied in industrial control, electric power, instru - ments and communication fields. Extension packages with wiring mounting and rail mounting also enable them with reverse voltage pro - tection. Example: 15DMWE_2415S1.5 15= 15Watt; D= DIP; M= series; WE= wide input (2:1 ) 18-36Vin; 15Vout; S= single output; 1.5= 1500VDC Common specifications Short circuit protection: Hiccup, continuous, self-recovery Cooling: Free air convection Operation temperature range: • 3.3V/5V output: 40°C~+95°C

• others: -40°C~+105°C Storage temperature range: -55°C~+125°C Storage humidity range: 95% MAX Lead temperature: 300°C MAX, 1.5mm from case for 10 sec Vibration: 10-150Hz, 5G, 0.75mm. along X, Y and Z Case material: Aluminium alloy MTBF (MIL-HDBK-217F @25°C): 1,000,000 hours Weight: 15g / 35g (wiring) / 55g (rail) Isolation specifications Item Test condition Min Typ Max Units Isolation voltage Input to output 1500 VDC Isolation voltage Input to output 1000 VDC Isolation resistance Test at 500VDC 1000 MΩ Isolation capacitance 1000 pF Input specifications Item Test condition Min Typ Max Units Input current (full load/no load) Nominal input series, nominal input voltage 12VDC
• 3.3V output
• 5V output
• 12V output
• 15V output
• 24V output 24VDC
• 3.3V output
• 5V output
• 12V output
• 15V output
• 24V output 48VDC
• 3.3V output
• 5V output
• 12V output
• 15V output
• 24V output mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA Reflected ripple current Nominal input series 30 mA Surge voltage • 12VDC input
• 24VDC input
• 48VDC input -0.7 -0.7 -0.7 100 VDC VDC VDC Starting voltage • 12VDC input
• 24VDC input
• 48VDC input VDC VDC VDC Input under-volta- ge protection
• 12VDC input
• 24VDC input
• 48VDC input 5.5 6.5 15.5 VDC VDC VDC Starting time* 10 ms Input filter Pi Type Hot plug Unavailable Switching frequen- cy (PWM mode)
• 3.3V/5V output
• others 300 270 KHz Ctrl (The voltage of Ctrl pin is relative to input pin GND)
• Module switch on
• Module switch off
• Input current when switched off Ctrl suspended or connected to TTL high level (3.5-12VDC) Ctrl pin connected to GND or low level (0-1.2VDC) 2 7 mA Nominal input & constant resistance load Output specifications Item Test condition Min Typ Max Units Voltage accuracy ±1 ±3 % Line regulation Full load , Vmin-Vmax ±0.2 ±0.5 % Load regulation 5% load to full load ±0.5 ±1 % Transient recovery time 25% load step change 300 500 µs Transient respon- se deviation 25% load step change
• 3.3V/5V output
• Others Temperature drift Full load ±0.03 %/°C Ripple and noise* 20MHz Bandwidth 50 100 mVp-p Trim Input voltage range 90 110 %Vo Over current protection Input voltage range 110 160 %Vo Over voltage protection Input voltage range 110 150 190 %Io * 0%-5% load ripple&noise is no more than 5%Vo. Ripple and noise are measured by “parallel cable” method. Wide 2:1 input voltage range High efficiency up to 91% Short circuit protection (SCP) Isolation voltage: 1.5K VDC Over-current, over-voltage, under-voltage protection RoHS compliant Operating temperature range: -40°C to +105°C Meet CISPR32/EN55032 CLASS A, no external components International standard pin-out Wiring mounting and rail mounting products featuring anti-reverse connection for input

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 6 15DMWE_1.5 – Rev. 2018-1.0 Specifications subject to change without notice. 15DMWE_1.5 Series 15W - Single Output - Wide Input - Isolated & Regulated 1“ x 1“ DC-DC Converter Part Number Input Voltage [VDC] Nominal Range* Max Output Voltage [VDC] Output Current [mA] Full load Efficiency [%, Typ.]* Capacitive load [µF, Max.] 15DMWE_1203S1.5 12 9-18 20 3.3 4000 88 4700 15DMWE_1205S1.5 12 9-18 20 5 3000 90 4700 15DMWE_1212S1.5 12 9-18 20 12 1250 90 1000 15DMWE_1215S1.5 12 9-18 20 15 1000 91 820 15DMWE_1224S1.5 12 9-18 20 24 625 91 270 15DMWE_2403S1.5 24 18-36 40 3.3 4000 88 4700 15DMWE_2405S1.5 24 18-36 40 5 3000 90 4700 15DMWE_2412S1.5 24 18-36 40 12 1250 90 1000 15DMWE_2415S1.5 24 18-36 40 15 1000 91 820 15DMWE_2424S1.5 24 18-36 40 24 625 91 270 15DMWE_4803S1.5 48 36-75 80 3.3 4000 88 4700 15DMWE_4805S1.5 48 36-75 80 5 3000 90 4700 15DMWE_4812S1.5 48 36-75 80 12 1250 91 1000 15DMWE_4815S1.5 48 36-75 80 15 1000 91 820 15DMWE_4824S1.5 48 36-75 80 24 625 91 270 * The minimum input voltage and starting voltage of wring or rail models are 1VDC higher than those of DIP package due to input reverse polarity protection function. Absolute maximum rating without damage on the converter, but it isn‘t recommended. * Efficiency is measured in nominal input voltage and rated output load; for wiring and rail mounting models, due to input reverse polarity protection, a minimum efficiency greater than Min.-2 is qualified. Typical characteristics Nominal input voltage, 12V, 15V, 24V output Nominal input voltage, 3.3V, 5V output EMC specifications EMI CE CISPR32/EN55032 CLASS A (without external components)/ CLASS B (see EMC solution recommended circuit, ②) EMI RE CISPR32/EN55032 CLASS A (without external components)/ CLASS B (see EMC solution recommended circuit, ②) EMS ESD IEC/EN61000-4-2 Contact ±6KV, Air ±8KV perf. Criteria B EMS RS IEC/EN61000-4-3 10V/m perf. Criteria A EMS EFT IEC/EN61000-4-4 ±2KV (see EMC solution recommended circuit, ①) perf. Criteria A EMS Surge IEC/EN61000-4-5 line to line ±2KV (see EMC solution recommended circuit, ①) perf. Criteria B EMS CS IEC/EN61000-4-6 3 Vr.m.s perf. Criteria A

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 6 15DMWE_1.5 – Rev. 2018-1.0 Specifications subject to change without notice. 15DMWE_1.5 Series 15W - Single Output - Wide Input - Isolated & Regulated 1“ x 1“ DC-DC Converter Efficiency 15DMWE_2405S1.5 15DMWE_2415S1.5 15DMWE_2415S1.5 15DMWE_4805S1.5 15DMWE_4805S1.5 15DMWE_4812S1.5 15DMWE_4812S1.5 15DMWE_2405S1.5

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 4 of 6 15DMWE_1.5 – Rev. 2018-1.0 Specifications subject to change without notice. 15DMWE_1.5 Series 15W - Single Output - Wide Input - Isolated & Regulated 1“ x 1“ DC-DC Converter Typical application EMC solution-recommended circuit Application of trim and calculation of trim resistance All the DC/DC converters of this series are tested according to the recommended circuit before delivery. If it is required to further reduce input and output ripple, properly increase the input & output of additional capacitors Cin and Cout or select capacitors of low equivalent impedance provided that the capacitance is no larger than the max. capacitive load of the product. Refer to the Cout in typical application It is not allowed to connect modules output in parallel to enlarge the power.

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 5 of 6 15DMWE_1.5 – Rev. 2018-1.0 Specifications subject to change without notice. 15DMWE_1.5 Series 15W - Single Output - Wide Input - Isolated & Regulated 1“ x 1“ DC-DC Converter Mechanical dimensions and footprint Wiring mounting

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 6 of 6 15DMWE_1.5 – Rev. 2018-1.0 Specifications subject to change without notice. 15DMWE_1.5 Series 15W - Single Output - Wide Input - Isolated & Regulated 1“ x 1“ DC-DC Converter Rail mounting Note: 1. Only typical model listed. Non-standard models will be different from the above, please contact us for more details. 2. All specifications are measured at TA=25°C, humidity<75%, nominal input volta- ge and rated output load unless otherwise specified. 3. In this datasheet, all the test methods of indications are based on corporate standards.