15DMW_2412S1.5

15DMW GAPTEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 3 15DMW_S & 15DMW_D – Rev. 2016-1.0 Specifications subject to change without notice. 15DMW_S & 15DMW_D Series 15W - Single/Dual Output - Wide Input - Isolated & Regulated 1“ x 1“ DC-DC Converter DC-DC Converter 15 Watt The 15DMW_S & 15DMW_D series are isolated 15W DC/DC converters. Designed with high efficiency, they allow the operating temperature range of these units to be -40°C to +85°C (with derating) in a 6 pin DIP package with industry-standard footprint. Further features include wide 2:1 input voltage range, remote on/off control, trimmable output, short- circuit protection and over voltage protection. These converters are well suitable for battery operated equipment, mea - surement equipment, telecom, wireless network, Industry control sys - tem, everywhere where isolated, tightly regulated voltages and compact size are required. Model selection: WCTV_xxyyN## W= Watt; C=Case; T= Type; V= Voltage Variation (omitted ± 10%); xx= Vin; yy= Vout; N= Numbers of Output; ##= Isolation (kVDC) Example: 15DMW_2415S1.5 15= 15Watt; D= DIP; M=series; W= wide input (2:1) 18-36Vin; 15Vout; S= single output; 1.5=1500VDC Common specifications Short circuit protection: Hiccup, continuous, automatic recovery Cooling: Free air convection Operation temperature range: -40°C~+85°C (with derating) Storage temperature range: -55°C~+125°C Maximum case temperature: 100°C MAX Switching frequency (fixed): 400kHz TYP, pulse width modulation PWM Storage humidity range: 95% MAX Case material: Nickel-coated copper (six-sided) Base material: Non-conductive FR4 Potting material: Epoxy (UL94V-0) MTBF (MIL-HDBK-217F @25°C): 560,000 hours Weight: 16.5g Note: 1. Only typical model listed. Non-standard models will be different from the above, please contact us for more details. 2. All specifications are measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 3. In this datasheet, all the test methods of indications are based on corporate standards. Isolation specifications Item Test condition Min Typ Max Units Isolation voltage Input to output 1500 VDC Isolation resistance Test at 500VDC 1000 MΩ Isolation capacitance 1000 pF Input specifications Item Test condition Min Typ Max Units Input filter Pi Type Protection Fuse recommended Starting voltage • 12VDC input

• 24VDC input
• 48VDC input VDC VDC VDC Under-voltage turn-off • 12VDC input
• 24VDC input
• 48VDC input 5.5 16.5 30.5 VDC VDC VDC Remote ON/OFF • Converter: ON
• Converter: OFF
• Off idle current Open or 3.0V<Vr<12V Short circuit pin 6 and pin 2 or 0V<Vr<1.2V 2.5 mA Output specifications Item Test condition Min Typ Max Units Voltage tolerance ±2 % Line regulation Vmin - Vmax ±0.5 % Load regulation • 25% load to full load
• Balanced load (dual) ±0.5 Output voltage adjustment range only for single output models ±10 % Temperature drift (Vout) ±0.05 %/°C Ripple and noise 20MHz Bandwidth 100 mVp-p Output current limitation at 150 % typ.of Iout max., constant current Transient response setting time 25% load step change 250 µs Transient response over shoot di/dt=0.8A/µs ≤ ±5% of Vo (≤ ±6% for 3.3Vout) Start-up time Nominal Vin and constant resistive load 450 ms Over load protection % of full load at nominal input 110 % Over voltage protection
• 3.3V output
• 5V output
• 12V output
• 15V output 3.7 5.6 13.5 16.8 5.4 19.6 20.5 VDC VDC VDC VDC Wide 2:1 input voltage range High efficiency up to 89% Remote On/Off Input/output isolation voltage: 1.5K VDC Short circuit protection (SCP) Operating temperature range: -40°C to +85°C 100% burned in 15W DIL package RoHS compliant Customer design available

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 3 15DMW_S & 15DMW_D – Rev. 2016-1.0 Specifications subject to change without notice. 15DMW_S & 15DMW_D Series 15W - Single/Dual Output - Wide Input - Isolated & Regulated 1“ x 1“ DC-DC Converter Part Number Input Voltage [VDC] Nominal Range Output Voltage [VDC] Output Current [mA] Full load Input Current [mA] No load Full load Efficiency [%, Typ.] Capacitive load [µF, Max.] 15DMW_1203S1.5 12 9-18 3.3 4000 60 1294 85 1000 15DMW_1205S1.5 12 9-18 5 3000 40 1453 86 1000 15DMW_1212S1.5 12 9-18 12 1250 30 1420 88 330 15DMW_1215S1.5 12 9-18 15 1000 30 1420 88 220 15DMW_2403S1.5 24 18-36 3.3 4000 40 647 85 1000 15DMW_2405S1.5 24 18-36 5 3000 50 718 87 1000 15DMW_2412S1.5 24 18-36 12 1250 20 702 89 330 15DMW_2415S1.5 24 18-36 15 1000 20 702 89 220 15DMW_4803S1.5 48 36-75 3.3 4000 30 323 85 1000 15DMW_4805S1.5 48 36-75 5 3000 40 363 86 1000 15DMW_4812S1.5 48 36-75 12 1250 10 359 87 330 15DMW_4815S1.5 48 36-75 15 1000 10 351 89 220 15DMW_1212D1.5 12 9-18 ±12 ±625 30 1420 88 ±150 15DMW_1215D1.5 12 9-18 ±15 ±500 30 1420 88 ±100 15DMW_2412D1.5 24 18-36 ±12 ±625 20 710 88 ±150 15DMW_2415D1.5 24 18-36 ±15 ±500 20 710 88 ±100 15DMW_4812D1.5 48 36-75 ±12 ±625 10 355 88 ±150 15DMW_4815D1.5 48 36-75 ±15 ±500 10 355 88 ±100 Typical characteristics Output voltage adjustment Control pin suggest circuit

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 3 15DMW_S & 15DMW_D – Rev. 2016-1.0 Specifications subject to change without notice. 15DMW_S & 15DMW_D Series 15W - Single/Dual Output - Wide Input - Isolated & Regulated 1“ x 1“ DC-DC Converter Mechanical dimensions EMC considerations Note: Unit: mm General tolerances: ±0.5mm Pin size tolerances: ±0.35mm Recommended Layout with input Filter Suggested Schematic to comply with EN55022 Conducted Noise emission Class B Following components are needed to comply with EN55022 Class B conducted noise: 15DMW_12xxS1.5 Component Value Voltage Reference C2, C3 10µF 25V 1812 MLCC C5, C6 1000pF 25KV 1206 MLCC L1 325µH Common Mode Choke 15DMW_24xxS1.5 Component Value Voltage Reference C2, C3 6.8µF 50V 1812 MLCC C5, C6 1000pF 2KV 1206 MLCC L1 325µH Common Mode Choke 15DMW_48xxS1.5 Component Value Voltage Reference C2, C3 2.2µF 1000V 1812 MLCC C5, C6 1000pF 2KV 1206 MLCC L1 325µH 2KV Common Mode Choke Pin connection Pin 1 2 3 4 5 6 Single +Vin -Vin +Vout Trim -Vout Remote On/Off Dual +Vin -Vin +Vout COM -Vout Remote On/Off