15DAWE GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 5 15DAWE_1.5 – Rev. 2020-1.1 Specifications subject to change without notice. 15DAWE_1.5 series 15W - Single Output - Wide Input - Isolated & Regulated DC-DC Converter Efficiency up to 90% 2:1 wide input voltage range Output over current, over voltage and input under voltage protection Short circuit protection (SCP) 1.5kVDC isolation Operating temperature range: -40°C ~ +85°C Six-sided metal shield Industry standard pinout Meet CISPR32/EN55032 CLASS A, without extra components IEC60950/UL60950/EN60950 approved DC-DC Converter 15 Watt The 15DAWE_1.5 series are isolated 15W DC-DC products with a 2:1 input voltage range. They feature efficiencies of up to 90%, 1500VDC input to output isolation, operating ambient temperature range of -40°C ~ +85°C, input under-voltage protection, output short-circuit, over-voltage, over-current protection. They meet CLASS A of CISPR32/EN55032 EMI standards without external components. They are widely used in applications such as data transmission device, battery power supplies, tele-comunication device, distributed power supply system, hybrid module system, remote control system, industrial robot system fields. Example: 15DAWE_2415S1.5 15 = 15Watt; D = DIP; A = series; W = wide input (2:1) 18-36Vin; E = cost effective; 15Vout; S = single output; 1.5 = 1500VDC isolation Input specifications Item Test condition Min Typ Max Units Reflected ripple current 30 mA Input surge voltage (1000 ms)

  • 24VDC input
  • 48VDC input -0.7 -0.7 100 VDC VDC Start-up voltage • 24VDC input
  • 48VDC input VDC VDC Under voltage shutdown
  • 24VDC input
  • 48VDC input 15.5 VDC VDC Start-up time Nominal input & constant resistance load 10 ms Input filter Pi Ctrl (1) • Module ON
  • Module OFF
  • Input current when OFF Ctrl pin open or pulled high (3.5-12VDC) Ctrl pin pulled low to GND (0-1.2VDC) 4 7 mA Hot plug Unavailable 1. The CTRL pin voltage is referenced to GND. Common specifications Short circuit protection: Hiccup, continous, self-recovery Cooling: Free air convection Vibrating: 10-55Hz, 2G, 30 Min. along X, Y and Z Operation temperature range: -40°C~+85°C Storage temperature range: -55°C~+125°C Pin soldering resistance temperature: 300°C MAX, 1.5mm from case for 10 sec Storage humidity range: 5-95%RH Switching frequency: 270kHz TYP, PWM mode Case material: Plastic (UL94-V0) MTBF (MIL-HDBK-217F@25°C): 1000 K hours MIN Weight: 26g / 34g with heatsink Dimensions: 50.80 × 25.40 × 11.80 mm 51.40 × 26.20 × 16.50 mm with heatsink Isolation specifications Item Test condition Min Typ Max Units Isolation voltage Tested for 1 minute and leakage current less than 1 mA

1500 VDC

Isolation resistance Test at 500VDC 1000 MΩ Isolation capacitance 100KHz/0.1V

  • 24VDC output
  • Others 2050 1050 pF pF Output specifications Item Test condition Min Typ Max Units Output voltage accuracy Positive and negative accuracy ±1 ±3 % Line regulation Full load, Input volta- ge from low to high ±0.2 ±0.5 % Load regulation 5% to 100% load ±0.5 ±1 % Transient recovery time 25% load step change 300 500 µs Transient respon- se deviation 25% load step change
  • 3.3VDC output
  • others Temperature drift 100% full load ±0.03 %/°C Ripple & Noise* 20MHz Bandwidth 50 100 mVp-p Trim Input voltage range 90 110 %Vo Over voltage protection Input voltage range 110 160 %Vo Over current protection Input voltage range 110 190 %Io * Ripple and noise tested by “parallel cable” method. See detailed operation instructions at Testing of Power Converter section, application notes. UL-60950-1 (E347551)

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 5 15DAWE_1.5 – Rev. 2020-1.1 Specifications subject to change without notice. 15DAWE_1.5 series 15W - Single Output - Wide Input - Isolated & Regulated DC-DC Converter Part Number Input Voltage [VDC] Nominal Range Max(1) Output Voltage [VDC] Output Current [mA, Max] Input Current [mA, typ/max] Full load No load Efficiency [%, Typ.] Capacitive load [µF, Max] 15DAWE_2405S1.5 24 18-36 40 5 3000 702/718 30/75 89 4700 15DAWE_2412S1.5 24 18-36 40 12 1250 702/718 30/10 89 1000 15DAWE_2415S1.5 24 18-36 40 15 1000 702/718 5/10 89 820 15DAWE_2424S1.5 24 18-36 40 24 625 702/718 5/10 90 270 15DAWE_4803S1.5 48 36-75 80 3.3 4000 355/363 20/30 83 14700 15DAWE_4805S1.5 48 36-75 80 5 3000 355/363 20/30 88 4700 15DAWE_4812S1.5 48 36-75 80 12 1250 351/363 5/10 88 1000 15DAWE_4815S1.5 48 36-75 80 15 1000 351/363 5/10 89 820 15DAWE_4824S1.5 48 36-75 80 24 625 351/363 5/10 89 270 1. Input voltage can’t exceed this value, or will cause the permanent damage. 2. Add suffix “H” for heat sink mounted, for example 15DAWE_2405S1.5H. EMC specifications EMI CE CISPR22/EN55022 Others: CLASS A (without external components) / CLASS B (see EMC compliance circuit ②) 3.3V output: CLASS B (see EMC compliance circuit ②) EMI RE CISPR22/EN55022 Others: CLASS A (without external components) / CLASS B (see EMC compliance circuit ②) 3.3V output: CLASS B (see EMC compliance circuit ②) EMS ESD IEC/EN61000-4-2 Contact ±4KV perf. Criteria B EMS RS IEC/EN61000-4-3 10V/m perf. Criteria A EMS EFT IEC/EN61000-4-4 ±2KV (see EMC compliance circuit ①) perf. Criteria B EMS Surge IEC/EN61000-4-5 line to line ±2KV (see EMC compliance circuit ①) perf. Criteria B EMS CS IEC/EN61000-4-6 3 Vr.m.s perf. Criteria A EMS Voltage dips, short and interruptions immunity IEC/EN61000-4-29 0%-70% perf. Criteria B Typical characteristics

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 4 of 5 15DAWE_1.5 – Rev. 2020-1.1 Specifications subject to change without notice. 15DAWE_1.5 series 15W - Single Output - Wide Input - Isolated & Regulated DC-DC Converter Trim Trim Function for Output Voltage Adjustment (open if unused) Mechanical dimensions

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 5 of 5 15DAWE_1.5 – Rev. 2020-1.1 Specifications subject to change without notice. 15DAWE_1.5 series 15W - Single Output - Wide Input - Isolated & Regulated DC-DC Converter Mechanical dimensions (with heatsink) Note: 1. The maximum capacitive load offered were tested at input voltage range and full load; 2. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta = 25°C, humidity <75%RH with nominal input voltage and rated output load; 3. All index testing methods in this datasheet are based on company corporate standards; 4. We can provide product customization service, please contact our technicians directly for specific information; 5. Products are related to laws and regulations: see „Features“ and „EMC“; 6. Our products shall be classified according to ISO14001 and related environmen- tal laws and regulations, and shall be handled by qualified units.