15ACP GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 3 15ACP_S – Rev. 2017-1.0 Specifications subject to change without notice. 15ACP_S Series 15W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated High efficiency up to 83% Universal AC input range (90~264VAC) Withstand 300VA surge input for 5 sec. Over voltage protection (OVP) Over load protection (OLP) Short circuit protection (SCP) Wide operating ambient temperature (-20°C~70°C) 100% full load burn-in test Easy assembling from top side PCB soldering side with conformal coating AC-DC Converter 15 Watt The 15ACP_S series features standard rail mounting, energy efficiency and is highly cost-effective. The series offers stability and high noise immunity especially for industrial control equipment, machinery and other demanding environments for industri al equipment. This converter offers a compact and light weight design with and standard rail installation (35mm). Furthermore this series offers Easy Fuse Tripping due and a built-in DC OK relay contact. The converter can be installed on TS-35/7.5 or TS-35/15. Example: 15ACP_24S 15= 15Watt AC= AC-DC P= series 24= 24 Vout S= single output Input specifications Input voltage range 90~264VAC Input frequency 47~63Hz AC current 230VAC 0.7A (max) Inrush current Cold start, 230VAC

  • 120VAC 20A (typ)
  • 230VAC 40A (typ) Leakage current Input—output: <0.25mA Input—PG: <3.5mA Output specifications Item Test conditions Min Typ Max Units Output voltage accuracy Full load ±3 % Voltage adjustment range
  • 3.3V
  • 5V
  • 12V
  • 24V
  • 48V 3.1 4.75 11.4 14.25 22.8 3.5 5.25 12.6 15.75 25.2 V V V V V Line regulation Vin= min. to max. at full load ±1 % Load regulation 0% to 100% load ±2 % Set-up time (full load)
  • @230VAC input
  • @120VAC input s s Hold-up time (full load)
  • @230VAC input
  • @120VAC input ms ms Overshoot and undershoot 5 % Switching frequency 100 KHz * Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. Common specifications Short circut protection: Long-term mode, automatic recovery Temperature rise at full load: 40°C MAX Cooling: Free air convection Operation temperature range: -20°C~+70°C Storage temperature range: -40°C ~+85°C Storage humidity range: < 95% Temperature coefficient: 0.03%/°C MAX MTBF (using MIL-HDBK-217F): +25°C >200,000 hours Power boost: 150% of rated current Parallel function: support Safety standards: UL60950-1 2nd Ed; IEC 60950- 1:2005(2nd Ed); EN60950-1:2006 Case material: Heat-resistant Plastic (UL94-V0) and metal Dimensions (L*W*H): 79×51×28mm Weight: 217g Isolation specifications Item Test condition Min Typ Max Units Withstand voltage* • Primary-Sec.: 10mA
  • Primary-PG: 10mA
  • Secondary-PG: 10mA 3000 1500 500 VAC Isolation resistance 100 MΩ * Input-Output, tested for 1 minute, 500VDC and leakage current less than 1mA Note: 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. Protection specifications Over-load protection
  • 3.3V: 4.4~7.2A
  • 5V: 3.3~5.4A
  • 12V: 1.43~2.34A
  • 15V: 1.1~1.8A
  • 24V: 0.77~1.26A Protection type: constant power Over-voltage protection
  • 5V: 16.5~27W
  • 15V: 16.5~27W Protection type: constant voltage

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 3 15ACP_S – Rev. 2017-1.0 Specifications subject to change without notice. 15W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated 15ACP_S Series Mechanical dimensions EMC specifications EMC / Emission Compliance to EN55022 CALSS B FCC PART15 B EMC / Immunity Compliance to EN61000-4-2, 4, 5, 6, 8, 11 The SPS is considered as a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. Approval Model Power [W] Output [Vo, VDC] Rated Current [A] Current Range [A] Ripple&Noise* [mV, typ] 0~70°C -20~0°C Efficiency [%, typ] 220VAC UL 15ACP_03S 15 3.3 4 0~0.4 50 50 70 UL 15ACP_05S 15 5 3 0~3 50 50 76 UL 15ACP_12S 15 12 1.3 0~1.3 120 120 80 UL 15ACP_15S 15 15 1 0~1 120 120 81 UL 15ACP_24S 15 24 0.7 0~0.7 120 120 83 Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. Mounting method Mounting holes Screw specs Torque max. Bottom 1~2 M3 6.5kgf.cm (max) Side 3~4 M3 6.5kgf.cm (max) DC terminal blocks installation information Terminal No. Function Wire specs Rec. torque 4 -V 22-14AWG 7.5Kgf.cm 5 +V AC terminal blocks installation information Terminal No. Function Wire specs Torque max. 1 L 22-14AWG 7.5Kgf.cm2 N 3 PG

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 3 15ACP_S – Rev. 2017-1.0 Specifications subject to change without notice. 15W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated 15ACP_S Series Typical characteristics Functional block diagram Derating Curves Ambient temperature (°C) Input Voltage (Vac)50~60HZ Load (%) Load (%)