1552209 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 9

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. M17, Device connector front mounting, series: M17 PRO, straight, for standard and ONECLICK fast locking system, No. of pos.: 4+4+3+PE, contact connection type: Pin, Crimp connection, flange dimensions: 21.6 mm x 21.6 mm, coding: Type 2 (based on IEC 61076-2-117), Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) Your advantages ONECLICK fast locking system with an optically, haptically, and acoustically clear locking position• Modern, consistent design for highly convenient operation Crimping connection: vibration- and temperature-resistant assembly All housing can be fitted with pin or socket contacts Safe use in the field, thanks to high degree of protection Commercial data Item number 1552209 Packing unit 20 pc Minimum order quantity 20 pc Sales key AB30 Product key ABRCAL GTIN 4067923030312 Weight per piece (including packing) 58.4 g Weight per piece (excluding packing) 58.4 g Customs tariff number 85366990 Country of origin DE M17-7EPSA8AWA00S - Device connector front mounting 1552209 https://www.phoenixcontact.com/us/products/1552209 Dec 4, 2025, 12:17AM Page 1 (9)

Order information: Order crimp contacts separately Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Operate the connector only when it is fully plugged in and interlocked.
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the minimum bending radius of the cable. Lay the cable without twisting it.
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting Safety note M17-7EPSA8AWA00S - Device connector front mounting 1552209 https://www.phoenixcontact.com/us/products/1552209 Dec 4, 2025, 12:17AM Page 2 (9)

warnings (e.g. DIN EN ISO 13732-1:2008-12). Product properties Series M17 PRO Material specifications Flammability rating according to UL 94 V0 Connector Insulating body Note Order information: Order crimp contacts separately. The contact assignment can be found in the installation notes. Coding Type 2 (based on IEC 61076-2-117) Material (Insulating body) PA 6.6 Flammability rating according to UL 94 V0 Insertion/withdrawal cycles 100 Connection method Crimp connection Contact switching type Pin Application Data, signals, power Number of positions 12 Connection profile 4+4+3+PE Number Contact (Power contacts) 4 Diameter Contact (Power contacts) 1 mm Litz wire cross-section min. Contact (Power contacts) 0.06 mm² Litz wire cross-section max. Contact (Power contacts) 1.5 mm² Rated current Contact (Power contacts) 16 A (for max. connection cross section)

630 V AC (Overvoltage category III/3)Rated voltage Contact (Power contacts)

850 V DC (Overvoltage category II/3)

Number Contact (Data contacts) 4 Diameter Contact (Data contacts) 0.6 mm Litz wire cross-section min. Contact (Data contacts) 0.08 mm² Litz wire cross-section max. Contact (Data contacts) 0.34 mm² Rated current Contact (Data contacts) 3.6 A (for max. connection cross section) Rated voltage Contact (Data contacts) 50 V Rated surge voltage 0.8 kV Overvoltage category III Degree of pollution 3 Number Contact (Signal contact group 1) 2 Diameter Contact (Signal contact group 1) 1 mm Litz wire cross-section min. Contact (Signal contact group 1) 0.06 mm² Litz wire cross-section max. Contact (Signal contact group 1) 0.75 mm² M17-7EPSA8AWA00S - Device connector front mounting 1552209 https://www.phoenixcontact.com/us/products/1552209 Dec 4, 2025, 12:17AM Page 3 (9)

Rated current Contact (Signal contact group 1) 11 A (for max. connection cross section) Rated voltage Contact (Signal contact group 1) 50 V Rated surge voltage 0.8 kV Overvoltage category III Degree of pollution 3 Number Contact (Signal contact group 2) 2 Diameter Contact (Signal contact group 2) 0.6 mm Litz wire cross-section min. Contact (Signal contact group 2) 0.08 mm² Litz wire cross-section max. Contact (Signal contact group 2) 0.5 mm² Rated current Contact (Signal contact group 2) 3.6 A (for max. connection cross section) Rated voltage Contact (Signal contact group 2) 50 V Rated surge voltage 0.8 kV Overvoltage category III Degree of pollution 3 Housing Type Flange housing Thread type M17 Design straight Type of locking for standard and ONECLICK fast locking system Mounting type Front mounting (4x M2,5) Flange dimensions 21.6 mm x 21.6 mm Material (Housing) GD-Zn Material (Seal) FKM IP67Degree of protection (plugged in) IP68 (2 m / 24 h) Environmental and real-life conditions Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C (see derating curve) Standards and regulations Standard designation M17 Hybrid Standards/specifications based on IEC 61076-2-117 M17-7EPSA8AWA00S - Device connector front mounting 1552209 https://www.phoenixcontact.com/us/products/1552209 Dec 4, 2025, 12:17AM Page 4 (9)

Ø 0,1 A 4xM2,5 Ø17 +0,1 A ±0,5 16,8 -0,2 Rz16 area for Rz16 A-A A A Installation dimensions M17-7EPSA8AWA00S - Device connector front mounting 1552209 https://www.phoenixcontact.com/us/products/1552209 Dec 4, 2025, 12:17AM Page 5 (9)

M17-7EPSA8AWA00S - Device connector front mounting 1552209 https://www.phoenixcontact.com/us/products/1552209 Dec 4, 2025, 12:17AM Page 6 (9)

= 3x1,5 mm + 2x0,75 mm +2x0,5 mm + 4x0,34 mm 0 10 20 30 40 50 60 70 80 90 100 110 I [A]  [°C] I = current strength, ϑ = ambient temperature, 3 x 14 A + 4 x 2 A constant + 4 x 0.1 A constant M17-7EPSA8AWA00S - Device connector front mounting 1552209 https://www.phoenixcontact.com/us/products/1552209 Dec 4, 2025, 12:17AM Page 7 (9)

ECLASS-13.0 27440109 ECLASS-15.0 27440109 ETIM ETIM 9.0 EC003569 M17-7EPSA8AWA00S - Device connector front mounting 1552209 https://www.phoenixcontact.com/us/products/1552209 Dec 4, 2025, 12:17AM Page 8 (9)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes, No exemptions China RoHS EFUP-EEnvironment friendly use period (EFUP) No hazardous substances above the limits EU REACH SVHC REACH candidate substance (CAS No.) No substance above 0.1 wt% Phoenix Contact 2025 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com M17-7EPSA8AWA00S - Device connector front mounting 1552209 https://www.phoenixcontact.com/us/products/1552209 Dec 4, 2025, 12:17AM Page 9 (9)