1547931 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 13

Technical content

Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. Device connector, rear mounting, Universal, 5-position, Socket, straight, M12-SPEEDCON, coding: A , Rear mounting, Pg9, Individual wires, cable length: 0.5 m, 0.50 mm2, PVC litz wire Your advantages Pre-assembled with litz wires for immediate use• Customer-specific assemblies and litz wire lengths available Sealed on the litz wire side for optimum leak-tightness All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design For high transmission safety: shield connection to the housing with optional EMC nut SPEEDCON fast locking system reduces cabling times Commercial Data Item number 1547931 Packing unit 1 pc Minimum order quantity 50 pc Sales Key AB24 Product Key ABQCDH GTIN 4046356136419 Weight per Piece (including packing) 43 g Weight per Piece (excluding packing) 43 g Customs tariff number 85444290 Country of origin DE SACC-DSI-FS-5CON-PG9/0,5 SCODC - Device connector, rear mounting 1547931 https://www.phoenixcontact.com/us/products/1547931 Jun 14, 2023, 6:12 AM Page 1 (13)

General The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • Only use tools recommended by Phoenix Contact
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products Safety note SACC-DSI-FS-5CON-PG9/0,5 SCODC - Device connector, rear mounting 1547931 https://www.phoenixcontact.com/us/products/1547931 Jun 14, 2023, 6:12 AM Page 2 (13)
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting type Rear mounting Pg9 With flat nut Assembly instructions With flat nut Connection method Individual wires Product properties Product type Circular connectors (device side) Number of positions 5 Sensor type Universal No. of cable outlets 1 Shielded no Coding A Thread type M12 Insulation characteristics Overvoltage category III Degree of pollution 3 Material specifications Flammability rating according to UL 94 V0 Seal material FKM Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material for screw connection Zinc die-cast, nickel-plated Conductor material Tin-plated Cu litz wires Electrical properties Nominal voltage UN 60 V Nominal current IN 4 A Connection data Conductor connection Connection method Individual wires

2 NmTightening torque

SACC-DSI-FS-5CON-PG9/0,5 SCODC - Device connector, rear mounting 1547931 https://www.phoenixcontact.com/us/products/1547931 Jun 14, 2023, 6:12 AM Page 3 (13)

Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Socket Head cable outlet straight Head thread type M12 Head locking type SPEEDCON Coding A Cable/line Cable length 0.5 m Cable type PVC litz wire Signal type/category Universal Wire diameter incl. insulation 1.8 mm Single wire, color black, brown,blue, white, gray Conductor material Tin-plated Cu litz wires Material wire insulation PVC Environmental and real-life conditions Ambient conditions IP67 (When plugged in) IP65 (When plugged in) Degree of protection IP65/IP67 Standards and regulations M12 Standards/specifications IEC 61076-2-101 SACC-DSI-FS-5CON-PG9/0,5 SCODC - Device connector, rear mounting 1547931 https://www.phoenixcontact.com/us/products/1547931 Jun 14, 2023, 6:12 AM Page 4 (13)

Pin assignment M12 socket, 5-pos., A-coded, socket side view Dimensional drawing Dimensional drawing SACC-DSI-FS-5CON-PG9/0,5 SCODC - Device connector, rear mounting 1547931 https://www.phoenixcontact.com/us/products/1547931 Jun 14, 2023, 6:12 AM Page 5 (13)

SACC-DSI-FS-5CON-PG9/0,5 SCODC - Device connector, rear mounting 1547931 https://www.phoenixcontact.com/us/products/1547931 Jun 14, 2023, 6:12 AM Page 6 (13)

13,5 1x45° Ø15,3 max.4,5 +0,1 +0,1 Housing cutout for Pg9 fastening thread, mounting panel with feed-through hole (alternatively with surface as protection against rotation) SACC-DSI-FS-5CON-PG9/0,5 SCODC - Device connector, rear mounting 1547931 https://www.phoenixcontact.com/us/products/1547931 Jun 14, 2023, 6:12 AM Page 7 (13)

45° Ø16 Housing cutout for Pg9 fastening thread, mounting panel with thread SACC-DSI-FS-5CON-PG9/0,5 SCODC - Device connector, rear mounting 1547931 https://www.phoenixcontact.com/us/products/1547931 Jun 14, 2023, 6:12 AM Page 8 (13)

 EAC Approval ID: B.01687 SACC-DSI-FS-5CON-PG9/0,5 SCODC - Device connector, rear mounting 1547931 https://www.phoenixcontact.com/us/products/1547931 Jun 14, 2023, 6:12 AM Page 9 (13)

ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 8.0 EC002635 UNSPSC UNSPSC 21.0 39121400 SACC-DSI-FS-5CON-PG9/0,5 SCODC - Device connector, rear mounting 1547931 https://www.phoenixcontact.com/us/products/1547931 Jun 14, 2023, 6:12 AM Page 10 (13)

Environmental Product Compliance REACh SVHC Lead 7439-92-1 Environmentally Friendly Use Period = 50 yearsChina RoHS For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” SACC-DSI-FS-5CON-PG9/0,5 SCODC - Device connector, rear mounting 1547931 https://www.phoenixcontact.com/us/products/1547931 Jun 14, 2023, 6:12 AM Page 11 (13)

https://www.phoenixcontact.com/us/products/1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors PROT-M12 SH - Screw plug 1503302 https://www.phoenixcontact.com/us/products/1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors SACC-DSI-FS-5CON-PG9/0,5 SCODC - Device connector, rear mounting 1547931 https://www.phoenixcontact.com/us/products/1547931 Jun 14, 2023, 6:12 AM Page 12 (13)

https://www.phoenixcontact.com/us/products/1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry SACC-PG9-SEAL CLM - Flat gasket 1556320 https://www.phoenixcontact.com/us/products/1556320 Pg9 flat gasket, for M12 flush-type connectors with Pg9 fastening thread Phoenix Contact 2023 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SACC-DSI-FS-5CON-PG9/0,5 SCODC - Device connector, rear mounting 1547931 https://www.phoenixcontact.com/us/products/1547931 Jun 14, 2023, 6:12 AM Page 13 (13)