1534575 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 12

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector, rear mounting, INTERBUS (16 Mbps), 5-position, PUR halogen-free, green RAL 6017, shielded, Socket, straight, M12-SPEEDCON, coding: B, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 5 m, INTERBUS, Alternative product in accordance with RoHS II without Exemption 6c (Pb <0.1%) item no.: 1239946 Your advantages Preassembled with cables in various standard lengths for immediate use• Customer-specific assemblies and cable lengths can be supplied Sealed on the cable side for optimum tightness of seal Cable designs for all common networks and fieldbuses For high transmission safety: shield connection to the housing with optional EMC nut Commercial data Item number 1534575 Packing unit 1 pc Minimum order quantity 1 pc Sales key AB25 Product key ABQDGG Catalog page Page 425 (C-2-2019) GTIN 4046356026741 Weight per piece (including packing) 378 g Weight per piece (excluding packing) 378 g Customs tariff number 85444290 Country of origin DE SACCBP-M12FSB-5CON-M16/5,0-900 - Device connector, rear mounting 1534575 https://www.phoenixcontact.com/us/products/1534575 Oct 6, 2023, 6:00 AM Page 1 (12)

General The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. General Lock nut is included in the scope of delivery Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • Only use tools recommended by Phoenix Contact
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory Safety note SACCBP-M12FSB-5CON-M16/5,0-900 - Device connector, rear mounting 1534575 https://www.phoenixcontact.com/us/products/1534575 Oct 6, 2023, 6:00 AM Page 2 (12)

section of the product at phoenixcontact.com/products

  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting type Rear mounting M16 x 1.5 With flat nut Assembly instructions With flat nut Connection method Cable connection Product properties Product type Circular connectors (device side) Sensor type INTERBUS Number of positions 5 No. of cable outlets 1 Shielded yes Coding B Thread type M12 Insulation characteristics Overvoltage category II Degree of pollution 3 Material specifications Flammability rating according to UL 94 V0 Seal material FKM Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 6.6 Material for screw connection Brass, nickel-plated Outer sheath, material PUR Electrical properties Rated surge voltage 1.5 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ

48 V ACNominal voltage UN

60 V DC

Nominal current IN 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed) SACCBP-M12FSB-5CON-M16/5,0-900 - Device connector, rear mounting 1534575 https://www.phoenixcontact.com/us/products/1534575 Oct 6, 2023, 6:00 AM Page 3 (12)

Transmission medium Copper Connection data Conductor connection Connection method Cable connection Contact connection type Socket

2 NmTightening torque

Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Socket Head cable outlet straight Head thread type M12 Head locking type SPEEDCON Coding B Connection 2 Head design free cable end Cable/line Cable length 5 m INTERBUS [900] Dimensional drawing Cable weight 70 kg/km Number of positions 6 Shielded yes Cable type INTERBUS [900] Conductor structure 3 x 2 x 0.22 mm² SACCBP-M12FSB-5CON-M16/5,0-900 - Device connector, rear mounting 1534575 https://www.phoenixcontact.com/us/products/1534575 Oct 6, 2023, 6:00 AM Page 4 (12)

Signal speed 0.66 c Conductor structure signal line 32x 0.10 mm AWG signal line 24 Conductor cross section 3x 2x 0.22 mm² External cable diameter 8 mm Outer sheath, material PUR External sheath, color may green RAL 6017 Conductor material Bare Cu litz wires Material wire insulation PE Single wire, color green-yellow, white-brown, gray-pink Twisted pairs 2 cores to the pair Overall twist 3 pairs to the core Insulation resistance ≥ 5 GΩ*km Coupling resistance < 250.00 mΩ/m (at 30 MHz) Loop resistance ≤ 159.80 Ω/km 120 Ω ±20 % (at 64 kHz)Wave impedance 100 Ω ±15 % (with 1 MHz) Cable capacity ≤ 60 nF/km (At 800 Hz) Nominal voltage, cable 250 V (Peak value, not for high-power applications) Test voltage Core/Core 1500 Vrms Test voltage Core/Shield 1000 Vrms Minimum bending radius, fixed installation 7.5 x D Minimum bending radius, flexible installation 15 x D Max. bending cycles 5000000 ≥ 61 dB (at 772 kHz) ≥ 59 dB (with 1 MHz) ≥ 55 dB (at 2 МHz) ≥ 50 dB (at 4 МHz) ≥ 46 dB (at 8 МHz) ≥ 44 dB (at 10 MHz) ≥ 41 dB (at 16 MHz) Near end crosstalk attenuation (NEXT) ≥ 40 dB (at 20 МHz) ≤ 15 dB/km (at 256 kHz) ≤ 24 dB/km (at 772 kHz) ≤ 27 dB/km (with 1 MHz) ≤ 52 dB/km (at 4 МHz) ≤ 84 dB/km (at 10 MHz) ≤ 112 dB/km (at 16 MHz) Shield attenuation ≤ 119 dB/km (at 20 МHz) according to VDE 0472, Part 4, test type BFlame resistance according to IEC 60332-1 -40 °C ... 80 °C (cable, fixed installation)Ambient temperature (operation) SACCBP-M12FSB-5CON-M16/5,0-900 - Device connector, rear mounting 1534575 https://www.phoenixcontact.com/us/products/1534575 Oct 6, 2023, 6:00 AM Page 5 (12)

-30 °C ... 70 °C (Cable, flexible installation) Environmental and real-life conditions Ambient conditions IP67 (When plugged in) IP65 (When plugged in) Degree of protection IP65/IP67 -25 °C ... 85 °C (Plug / socket)Ambient temperature (operation) -40 °C ... 85 °C (without mechanical actuation) Standards and regulations M12 Standard designation M12 connector Standards/specifications IEC 61076-2-101 SACCBP-M12FSB-5CON-M16/5,0-900 - Device connector, rear mounting 1534575 https://www.phoenixcontact.com/us/products/1534575 Oct 6, 2023, 6:00 AM Page 6 (12)

Pin assignment M12 socket, 5-pos., B-coded, female side Diagram 0 10 20 30 40 50 60 70 80 90 100 110 120 130 I [A] [°C] = 5x0,34mm 2 1 I = current strength, T = ambient temperature SACCBP-M12FSB-5CON-M16/5,0-900 - Device connector, rear mounting 1534575 https://www.phoenixcontact.com/us/products/1534575 Oct 6, 2023, 6:00 AM Page 7 (12)

1,520,5 30,5 38,1 M12 M16x1,5 2,817 Dimensional drawing SACCBP-M12FSB-5CON-M16/5,0-900 - Device connector, rear mounting 1534575 https://www.phoenixcontact.com/us/products/1534575 Oct 6, 2023, 6:00 AM Page 8 (12)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1534575  EAC Approval ID: B.01687  cUL Recognized Approval ID: E221474-20220908 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 60 V 1.5 A - -  UL Recognized Approval ID: E221474-20220908 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

60 V 2 A - -

SACCBP-M12FSB-5CON-M16/5,0-900 - Device connector, rear mounting 1534575 https://www.phoenixcontact.com/us/products/1534575 Oct 6, 2023, 6:00 AM Page 9 (12)

ECLASS-11.0 27440103 ECLASS-12.0 27440103 ECLASS-13.0 27440103 ETIM ETIM 8.0 EC003570 UNSPSC UNSPSC 21.0 39121400 SACCBP-M12FSB-5CON-M16/5,0-900 - Device connector, rear mounting 1534575 https://www.phoenixcontact.com/us/products/1534575 Oct 6, 2023, 6:00 AM Page 10 (12)

Environmental product compliance REACh SVHC Lead 7439-92-1 Environmentally Friendly Use Period = 50 yearsChina RoHS For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” SACCBP-M12FSB-5CON-M16/5,0-900 - Device connector, rear mounting 1534575 https://www.phoenixcontact.com/us/products/1534575 Oct 6, 2023, 6:00 AM Page 11 (12)

SACC-M16-KD-NUT-SH - EMC nut 1440164 https://www.phoenixcontact.com/us/products/1440164 EMC nut, Threads, M16 x 1.5, Alternative product in accordance with RoHS II without Exemption 6c (Pb <0.1%) item no.: 1239703 Phoenix Contact 2023 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SACCBP-M12FSB-5CON-M16/5,0-900 - Device connector, rear mounting 1534575 https://www.phoenixcontact.com/us/products/1534575 Oct 6, 2023, 6:00 AM Page 12 (12)