1525623 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

https://www.phoenixcontact.com/pi/products/1525623 09/11/2020 Page 1 / 10 Bus system flat-type plug - SACCEC-M12MS-5CON-M16/ 0,5-920 - 1525623 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Bus system flush-type plug, DeviceNet/CANopen, 5-pos., M12, shielded, A-coded, front/screw mounting with M16 thread, with 0.5 m bus cable, 2 x 0.2 mm², 2 x 0.32 mm² Your advantages Pre-assembled with cables in various standard lengths for immediate use Customer-specific assemblies and cable lengths can be supplied Sealed on the cable side for optimum tightness of seal Cable designs for all common networks and fieldbuses For high transmission safety: shield connection to the housing with optional EMC nut Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356022361 Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.

https://www.phoenixcontact.com/pi/products/1525623 09/11/2020 Page 2 / 10 Bus system flat-type plug - SACCEC-M12MS-5CON-M16/ 0,5-920 - 1525623 Technical data General Rated current at 40°C 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed) Rated voltage 48 V AC

60 V DC

Rated surge voltage 1.5 kV Number of positions 5 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Signal type/category CANopen DeviceNet™ Status display No Overvoltage category II Degree of pollution 3 Test voltage 2500 V Connection method CAN Bus / DeviceNet Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Front mounting M16 x 1.5 With locking nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 6.6 Material, knurls Nickel-plated brass Sealing material NBR Standards and Regulations Standards/specifications M12 connector IEC 61076-2-101 Flammability rating according to UL 94 V0 Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.

https://www.phoenixcontact.com/pi/products/1525623 09/11/2020 Page 3 / 10 Bus system flat-type plug - SACCEC-M12MS-5CON-M16/ 0,5-920 - 1525623 Technical data Standards and Regulations

  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • Only use tools recommended by Phoenix Contact
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
  • Ensure that the protective or functional ground has been properly connected. applicable when combining several circuits in a cable and/or connector
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Cable Cable type CANopen /DeviceNet™, PUR, violet Cable type (abbreviation) 920 UL AWM style 21198 (80°C/300 V) Signal type/category CANopen DeviceNet™ Cable structure 2xAWG24/19+2xAWG22/19 Conductor cross section 2x 0.25 mm² (Data cable) 2x 0.34 mm² (Power supply) 1x 0.34 mm² (Drain wire) AWG signal line 24 AWG power supply 22 Conductor structure signal line 19x 0.13 mm Conductor structure, voltage supply 19x 0.15 mm

https://www.phoenixcontact.com/pi/products/1525623 09/11/2020 Page 4 / 10 Bus system flat-type plug - SACCEC-M12MS-5CON-M16/ 0,5-920 - 1525623 Technical data Cable Core diameter including insulation 1.95 mm ±0.05 mm (Data cable) 1.4 mm ±0.05 mm (Power supply) Wire colors Red-black, blue-white Twisted pairs 2 cores to the pair Type of pair shielding Plastic-coated aluminum foil, aluminum side outside Overall twist 2 pairs around a drain wire in the center to the core Shielding Tinned copper braided shield Optical shield covering 80 % External sheath, color violet RAL 4001 External cable diameter D 6.7 mm ±0.3 mm Minimum bending radius, fixed installation 5 x D Minimum bending radius, flexible installation 10 x D Number of bending cycles 5000000 Bending radius 70 mm Minimum bending radius, drag chain applications 10 x D Traversing path 4.5 m Traversing rate 3 m/s Acceleration 3 m/s² Cable weight 90 kg/km Outer sheath, material PUR Material conductor insulation Foamed PE (Data cable) PE (Power supply) Conductor material Tin-plated Cu litz wires Insulation resistance ≥ 5 GΩ*km (Data cable) ≥ 5 GΩ*km (Power supply) Loop resistance ≤ 181.80 Ω/km (Data cable) ≤ 114.80 Ω/km (Power supply) Cable capacity nom. 40 nF/km (Data cable) Wave impedance 120 Ω ±10 % (with 1 MHz) Attenuation ≤ 22.9 dB/km (with 1 MHz) ≤ 16.4 dB/km (At 500 kHz) ≤ 9.5 dB/km (At 125 kHz) Nominal voltage, cable ≤ 300 V (Peak value, not for high-power applications) Test voltage Core/Core 2000 V (50 Hz, 1 min.) Test voltage Core/Shield 2000 V (50 Hz, 1 min.) Flame resistance UL 1581, Sec. 1060 (FT-1) IEC 60332-1 in accordance with ISO 6722-1 5.22 (UN ECE-R 118.01) Halogen-free in accordance with DIN VDE 0472 part 815

https://www.phoenixcontact.com/pi/products/1525623 09/11/2020 Page 5 / 10 Bus system flat-type plug - SACCEC-M12MS-5CON-M16/ 0,5-920 - 1525623 Technical data Cable according to IEC 60754-1 Other resistance Low adhesion Ambient temperature (operation) -40 °C ... 80 °C (cable, fixed installation) -20 °C ... 80 °C (cable, flexible installation) Ambient temperature (storage/transport) -40 °C ... 80 °C Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Dimensional drawing M12 flush-type plug, front mounting, can be positioned

https://www.phoenixcontact.com/pi/products/1525623 09/11/2020 Page 6 / 10 Bus system flat-type plug - SACCEC-M12MS-5CON-M16/ 0,5-920 - 1525623 Dimensional drawing Housing cutout for M16 fastening thread, mounting panel with thread Circuit diagram Contact assignment of the M12 plug

https://www.phoenixcontact.com/pi/products/1525623 09/11/2020 Page 7 / 10 Bus system flat-type plug - SACCEC-M12MS-5CON-M16/ 0,5-920 - 1525623 Schematic diagram Pin assignment M12 male connector, 5-pos., A-coded, male side

https://www.phoenixcontact.com/pi/products/1525623 09/11/2020 Page 8 / 10 Bus system flat-type plug - SACCEC-M12MS-5CON-M16/ 0,5-920 - 1525623 Cable cross section CANopen /DeviceNet™, PUR, violet [920] Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102

https://www.phoenixcontact.com/pi/products/1525623 09/11/2020 Page 9 / 10 Bus system flat-type plug - SACCEC-M12MS-5CON-M16/ 0,5-920 - 1525623 Classifications ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC000830 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 UNSPSC 18.0 39121413 UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC B.01687

https://www.phoenixcontact.com/pi/products/1525623 09/11/2020 Page 10 / 10 Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8

32825 Blomberg

Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com