1525584

1525584 PHOENIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 10

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector front mounting, 2-position halogen-free, red lilac RAL 4001, shielded, Plug, straight, M12, coding: B , on free cable end, Front mounting, M16 x 1.5, PROFIBUS, cable length: 10 m, PROFIBUS, Alternative product in accordance with RoHS II without Exemption 6c (Pb <0.1%) item no.: 1239885 Your advantages Preassembled with cables in various standard lengths for immediate use• Customer-specific assemblies and cable lengths can be supplied Sealed on the cable side for optimum tightness of seal Cable designs for all common networks and fieldbuses For high transmission safety: shield connection to the housing with optional EMC nut Commercial data Item number 1525584 Packing unit 1 pc Minimum order quantity 1 pc Sales key AB25 Product key ABQDEA Catalog page Page 17 (PC-2005) GTIN 4046356022323 Weight per piece (including packing) 610.8 g Weight per piece (excluding packing) 610.8 g Customs tariff number 85444290 Country of origin DE SACCEC-M12MSB-2CON-M16/10-910 - Device connector front mounting 1525584 https://www.phoenixcontact.com/us/products/1525584 Sep 11, 2023, 5:57 AM Page 1 (10)

General The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. General Lock nut is included in the scope of delivery Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
• Only use tools recommended by Phoenix Contact
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory Safety note SACCEC-M12MSB-2CON-M16/10-910 - Device connector front mounting 1525584 https://www.phoenixcontact.com/us/products/1525584 Sep 11, 2023, 5:57 AM Page 2 (10)

section of the product at phoenixcontact.com/products

• Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting type Front mounting M16 x 1.5 Connection method PROFIBUS Product properties Product type Circular connectors (device side) Number of positions 2 Shielded yes Coding B Insulation characteristics Overvoltage category II Degree of pollution 3 Material specifications Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 6.6 Material for screw connection Brass, nickel-plated Electrical properties Rated surge voltage 1.5 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ

48 V ACNominal voltage UN

60 V DC

Nominal current IN 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed) Test voltage 2500 V Transmission medium Copper Connection data Conductor connection SACCEC-M12MSB-2CON-M16/10-910 - Device connector front mounting 1525584 https://www.phoenixcontact.com/us/products/1525584 Sep 11, 2023, 5:57 AM Page 3 (10)

Connection method PROFIBUS Connector Connection 1 Head design Plug Head cable outlet straight Head thread type M12 Coding B Connection 2 Head design free cable end Cable/line Cable length 10 m PROFIBUS [910] Dimensional drawing Cable weight 90 kg/km UL AWM Style 21198 (80°C/300 V) Number of positions 2 Shielded yes Cable type PROFIBUS [910] Conductor structure 1x2xAWG24/19 Conductor structure signal line 19x 0.13 mm AWG signal line 24 Conductor cross section 2x 0.25 mm² (Signal line) Wire diameter incl. insulation 2.55 mm ±0.07 mm External cable diameter 7.8 mm ±0.2 mm Outer sheath, material PUR External sheath, color red lilac RAL 4001 Conductor material Tin-plated Cu litz wires Material, filler PP Material wire insulation Foam-Skin PP Single wire, color red, green Overall twist 2 cores with 2 fillers to the core Optical shield covering 85 % SACCEC-M12MSB-2CON-M16/10-910 - Device connector front mounting 1525584 https://www.phoenixcontact.com/us/products/1525584 Sep 11, 2023, 5:57 AM Page 4 (10)

Max. conductor resistance ≤ 78.6 Ω/km Insulation resistance ≥ 5 GΩ*km Wave impedance 150 Ω ±10 % (3 MHz ... 20 MHz) Cable capacity nom. 30 pF/m Nominal voltage, cable 300 V Test voltage Core/Core 1500 V (50 Hz, 1 min.) Test voltage Core/Shield 1500 V (50 Hz, 1 min.) Smallest bending radius, fixed installation 40 mm Smallest bending radius, movable installation 65 mm 4000000Max. bending cycles 5000000 Shield attenuation ≤ 0.049 dB/m (at 16 MHz) in accordance with DIN VDE 0472 part 815Halogen-free according to IEC 60754-1 UL 1581, Section 1060 and UL 2556, Section 9.3 (FT1) UL 1581, Section 1100 and UL 2556, Section 9.1 (HFT/FT2) Flame resistance IEC 60332-1-2 Other resistance Low adhesion -40 °C ... 80 °C (cable, fixed installation) -30 °C ... 70 °C (Cable, flexible installation) -20 °C ... 60 °C (for installation) Ambient temperature (operation) -20 °C ... 60 °C (cable, drag chain applications) Environmental and real-life conditions Ambient conditions IP67Degree of protection IP65/IP67 -25 °C ... 85 °C (Plug / socket)Ambient temperature (operation) -40 °C ... 85 °C (without mechanical actuation) Standards and regulations M12 Standard designation M12 connector Standards/specifications IEC 61076-2-101 SACCEC-M12MSB-2CON-M16/10-910 - Device connector front mounting 1525584 https://www.phoenixcontact.com/us/products/1525584 Sep 11, 2023, 5:57 AM Page 5 (10)

Pin assignment M12 male connector, 5-pos., B-coded, male side SACCEC-M12MSB-2CON-M16/10-910 - Device connector front mounting 1525584 https://www.phoenixcontact.com/us/products/1525584 Sep 11, 2023, 5:57 AM Page 6 (10)

M12x1 M16x1,5 Dimensional drawing SACCEC-M12MSB-2CON-M16/10-910 - Device connector front mounting 1525584 https://www.phoenixcontact.com/us/products/1525584 Sep 11, 2023, 5:57 AM Page 7 (10)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1525584  EAC Approval ID: B.01687  cUL Recognized Approval ID: E221474-20220908 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 60 V 1.5 A - -  UL Recognized Approval ID: E221474-20220908 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

60 V 2 A - -

SACCEC-M12MSB-2CON-M16/10-910 - Device connector front mounting 1525584 https://www.phoenixcontact.com/us/products/1525584 Sep 11, 2023, 5:57 AM Page 8 (10)

ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 8.0 EC002635 UNSPSC UNSPSC 21.0 39121400 SACCEC-M12MSB-2CON-M16/10-910 - Device connector front mounting 1525584 https://www.phoenixcontact.com/us/products/1525584 Sep 11, 2023, 5:57 AM Page 9 (10)

Environmental product compliance REACh SVHC Lead 7439-92-1 Environmentally Friendly Use Period = 50 yearsChina RoHS For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Phoenix Contact 2023 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SACCEC-M12MSB-2CON-M16/10-910 - Device connector front mounting 1525584 https://www.phoenixcontact.com/us/products/1525584 Sep 11, 2023, 5:57 AM Page 10 (10)