1524754 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 10

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Contact insert, straight, M23, number of positions: 4+4+4+PE / 3+N+PE, contact connection type: Pin, Wave soldering, series: SH, only suitable for use with the M23 hybrid solder-in connector Your advantages Reliable transmission of signals, data, and power in a single connector• 80% faster assembly and 60% less installation space compared to litz wire assemblies Cost reduction due to the elimination of additional PCB connectors Reduction of PCB complexity and EMC risks Elimination of work steps with high error potential Commercial data Item number 1524754 Packing unit 48 pc Minimum order quantity 48 pc Sales key AB38 Product key ABRCDX GTIN 4063151992156 Weight per piece (including packing) 30.8 g Weight per piece (excluding packing) 30.8 g Customs tariff number 85366990 Country of origin DE SH-8EPC5-PCB-L4 - Contact insert 1524754 https://www.phoenixcontact.com/us/products/1524754 Nov 18, 2025, 12:24AM Page 1 (10)

WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Operate the connector only when it is fully plugged in and interlocked.
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the minimum bending radius of the cable. Lay the cable without twisting it. Safety note
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). SH-8EPC5-PCB-L4 - Contact insert 1524754 https://www.phoenixcontact.com/us/products/1524754 Nov 18, 2025, 12:24AM Page 2 (10)

Product type Contact insert Series SH Application Hybrid Number of positions 13 Connection profile 4+4+4+PE / 3+N+PE Thread type M23 Electrical properties Contact: Power contacts Contact diameter 2 mm Nominal current IN 30 A (for max. connection cross section)

630 V AC (Overvoltage category III/3)Nominal voltage UN

850 V DC (Overvoltage category II/3)

Contact: Data contacts Contact diameter 0.8 mm Nominal current IN 3.6 A (for max. connection cross section) Nominal voltage UN 50 V (Contact 5 ... 8) Overvoltage category II, III Degree of pollution 3 Rated surge voltage 1.5 kV Contact: Signal contacts Contact diameter 1 mm Nominal current IN 8 A (for max. connection cross section) Nominal voltage UN 50 V (Contact 1 ... 4) Overvoltage category III Degree of pollution 3 Rated surge voltage 1.5 kV Connection data Connection method Wave soldering Material specifications Material Insulating body PA Material Contact CuZn Material Contact surface Au Flammability rating according to UL 94 V0 Connector SH-8EPC5-PCB-L4 - Contact insert 1524754 https://www.phoenixcontact.com/us/products/1524754 Nov 18, 2025, 12:24AM Page 3 (10)

Insertion/withdrawal cycles 100 Environmental and real-life conditions Ambient conditions Ambient temperature (operation) -40 °C ... 115 °C (see derating curve) Altitude 2000 m (4000 m at 300 V system voltage in accordance with DIN EN 606664-1) Permissible humidity (storage/transport) 50 % ... 65 % SH-8EPC5-PCB-L4 - Contact insert 1524754 https://www.phoenixcontact.com/us/products/1524754 Nov 18, 2025, 12:24AM Page 4 (10)

A BC D PE Pin assignment of pin, CAT5 SH-8EPC5-PCB-L4 - Contact insert 1524754 https://www.phoenixcontact.com/us/products/1524754 Nov 18, 2025, 12:24AM Page 5 (10)

≤150 °C ≤6 °C/s 265 °C ≤10 s  [°C] Preheat Peak Cooling t [s] Classification wave soldering profile SH-8EPC5-PCB-L4 - Contact insert 1524754 https://www.phoenixcontact.com/us/products/1524754 Nov 18, 2025, 12:24AM Page 6 (10)

0 10 20 30 40 50 60 70 80 90 100 110 120 I [A]  [°C] = Power: A-B, 2,5 mm , 2x22 A = Power: C-D, 2,5 mm , 2x13 A (constant) = Signal: 1-4, 0,5 mm , 4x2 A (constant) = Data: 5-8, AWG22, 4x1 A (constant) I = current strength, ϑ = ambient temperature, power contacts A-B: 2.5 mm2, 2 x 22 A, power contacts C-D: 2.5 mm2, 2 x 13 A (constant), signal contacts 1-4: 0.5 mm2, 4 x 2 A (constant), data contacts 5-8: AWG22, 4 x 1 A (constant) Diagram 0 10 20 30 40 50 60 70 80 90 100 110 120 I [A]  [°C] = Power: A-C, 2,5 mm , 3x26 A = Signal: 1-4, 0,5 mm , 4x2 A (constant) = Data: 5-8, AWG22, 4x1 A (constant) I = current strength, ϑ = ambient temperature, power contacts A-C: 2.5 mm2, 3 x 36 A, signal contacts 1-4: 0.5 mm2, 4 x 2 A (constant), data contacts 5-8: AWG22, 4 x 1 A (constant) SH-8EPC5-PCB-L4 - Contact insert 1524754 https://www.phoenixcontact.com/us/products/1524754 Nov 18, 2025, 12:24AM Page 7 (10)

0 10 20 30 40 50 60 70 80 90 100 110 120 I [A]  [°C] = Power: A-D, 2,5 mm , 4x20 A = Signal: 1-4, 0,5 mm , 4x2 A (constant) = Data: 5-8, AWG22, 4x1 A (constant) I = current strength, ϑ = ambient temperature, power contacts A-D: 2.5 mm2, 4 x 20 A, signal contacts 1-4: 0.5 mm2, 4 x 2 A (constant), data contacts 5-8: AWG22, 4 x 1 A (constant) SH-8EPC5-PCB-L4 - Contact insert 1524754 https://www.phoenixcontact.com/us/products/1524754 Nov 18, 2025, 12:24AM Page 8 (10)

ECLASS-13.0 27440223 ECLASS-15.0 27440223 ETIM ETIM 9.0 EC003557 SH-8EPC5-PCB-L4 - Contact insert 1524754 https://www.phoenixcontact.com/us/products/1524754 Nov 18, 2025, 12:24AM Page 9 (10)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes, No exemptions China RoHS EFUP-EEnvironment friendly use period (EFUP) No hazardous substances above the limits EU REACH SVHC REACH candidate substance (CAS No.) No substance above 0.1 wt% Phoenix Contact 2025 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SH-8EPC5-PCB-L4 - Contact insert 1524754 https://www.phoenixcontact.com/us/products/1524754 Nov 18, 2025, 12:24AM Page 10 (10)