150ACPM GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 4 150ACPM_SC – Rev. 2017-1.0 Specifications subject to change without notice. 150ACPM_SC Series 150W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated High efficiency up to 87% Universal AC input range (85~264VAC) Built-in Active PFC function, PF>0.95 Over power protection (OPP) Over load protection (OLP) Short circuit protection (SCP) Wide operating ambient temperature (-20°C~70°C) Withstand 300VA surge input for 5 secs. 100% full load burn-in test Easy assembling from top side All using 105°C long life electrolytic capacitors AC-DC Converter 150 Watt The 150ACPM_SC series features standard rail mounting, energy efficien- cy and is highly cost-effective. The series offers stability and high noise immunity especially for industrial control equipment, machinery and other demanding environments for industri al equipment. This converter offers a compact and light weight design with and standard rail installation (35mm). Furthermore this series offers Easy Fuse Tripping due and a built-in DC OK relay contact. The converter can be installed on TS-35/7.5 or TS-35/15. Example: 150ACPM_24SC 150= 150Watt AC= AC-DC PM= series 24= 24 Vout S= single output C= PFC (Power Factor Correction) Input specifications Input voltage range 85~264VAC, 120~370Vdc Input frequency 47~63Hz Power factor 115VAC

  • 0.98 (typ) 230VAC
  • 0.95 (typ) AC current 2A (max) Inrush current Cold start 115VAC
  • 30A (typ) 230VAC
  • 45A (typ) Leakage current (input 264Vac, 63Hz) Input—output: ≤0.25mA Input—PG: ≤3.5mA Output specifications Item Test conditions Min Typ Max Units Output voltage accuracy Full load ±2 % Voltage adjustment range
  • 12V
  • 15V
  • 24V
  • 48V 10.8 13.5 21.6 43.2 13.2 16.5 26.4 52.8 V V V V Line regulation Vin= min. to max. at full load ±0.5 % Load regulation • 12V, 15V
  • 24V, 48V Set-up time • @230VAC input
  • @115VAC input s s Hold-up time 10 ms Overshoot and undershoot 5 % Switching frequency 100 KHz * Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. Protection specifications Over-load protection
  • 12V: 13.125~18.75A
  • 15V: 10.5~17A
  • 24V: 6.93~9.45A
  • 48V: 3.36~4.8A Protection type: Constant power, auto recovery Over-power protection
  • 12V: 160~225W
  • 15V: 160~255W
  • 24V: 160~225W
  • 48V: 160~225W Protection type: Constant power, auto recovery Over-voltage protection
  • 12V: 14~18V
  • 15V: 17.8~22.5V
  • 24V: 27~36V
  • 48V: 52.5~72V Protection type: Constant power, auto recovery Over-temperature protection 105°C℃+5°C℃(detect on Mosfet temperature); shut down, auto recovery after the temperature goes down to 50°C℃ Common specifications Short circut protection: Long-term mode, automatic recovery Temperature rise at full load: 40°C MAX Cooling: Free air convection Operation temperature range: -20°C~+70°C Storage temperature range: -30°C ~+85°C Storage humidity range: < 95% Temperature coefficient: 0.03%/°C MAX MTBF (using MIL-HDBK-217F): +25°C >200,000 hours Power boost: 150% of rated current Parallel function: support Safety standards: UL60950-1 2nd Ed; IEC 60950- 1:2005(2nd Ed); EN60950-1:2006 Case material: Heat-resistant Plastic (UL94-V0) and metal Dimensions: 199*99*38mm Weight: 750g pending Isolation specifications Item Test condition Min Typ Max Units Withstand voltage* • Primary-Sec.: 10mA
  • Primary-PG: 10mA
  • Secondary-PG: 10mA 3000 1500 500 VAC Isolation resistance 100 MΩ * Input-Output, tested for 1 minute, 500VDC and leakage current less than 1mA Note: 1. All parameters NOT specially mentioned are measured at rated input, rated load and 25°C of ambient temperature.

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 4 150ACPM_SC – Rev. 2017-1.0 Specifications subject to change without notice. 150W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated 150ACPM_SC Series Mechanical dimensions EMC specifications EMC / Emission Compliance to EN55022, Class B EMC / Harmonic current Compliance to EN61000-3-2, CLASS D EMC / Immunity Compliance to EN61000-4-2, -3, -4, -5, -6, -8, -11; heavy industry level The power supply is considered as a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. Approval Model Power [W] Output [Vo, VDC] Rated Current [A] Current Range [A] Ripple&Noise* [mV, typ] 0~70°C -20~0°C Efficiency [%, typ] 230VAC 115VAC UL (pending) 150ACPM_12SC 150 12 12.5 0~12.5 100 200 86 82.5 UL (pending) 150ACPM_15SC 150 15 10 0~10 100 200 87 82.5 UL (pending) 150ACPM_24SC 150 24 6.3 0~6.3 100 200 88 85 UL (pending) 150ACPM_48SC 150 48 3.2 0~3.2 100 200 88 83.9 Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. Mounting method Mounting holes Screw specs L max. Torque max. Bottom 1-4 M3 4mm 12kgf.cm (max) Bottom 5-8 M3 / 10kgf.cm (max) Side 9-11 M3 4mm 6.5kgf.cm (max) Side 12-14 M3 / 10kgf.cm (max) AC terminal blocks installation information Terminal No. Function Wire specs Torque max. 1 L 22-12AWG 7.5Kgf.cm2 N 3 PG DC terminal blocks installation information Terminal No. Function Wire specs Rec. torque 4-5 -V 22-12AWG 7.5Kgf.cm 6-7 +V

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 4 150ACPM_SC – Rev. 2017-1.0 Specifications subject to change without notice. 150W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated 150ACPM_SC Series Typical characteristics Load-input derating curve 150ACPM_12SC 150ACPM_15SC 150ACPM_24SC 150ACPM_48SC Load-input derating curve Load-input derating curve Load-input derating curve Ambient derating curve Ambient derating curve Ambient derating curve Ambient derating curve AMBIENT TEMPERATURE (°C) AMBIENT TEMPERATURE (°C) AMBIENT TEMPERATURE (°C) AMBIENT TEMPERATURE (°C) INPUT VOLTAGE (VAC) INPUT VOLTAGE (VAC) INPUT VOLTAGE (VAC) INPUT VOLTAGE (VAC) LOAD (%) LOAD (%) LOAD (%) LOAD (%) LOAD (%)LOAD (%)LOAD (%)LOAD (%)

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 4 of 4 150ACPM_SC – Rev. 2017-1.0 Specifications subject to change without notice. Functional block diagram Functional diagram 150W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated 150ACPM_SC Series