150ACDRS_S GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 3 150ACDRS_S – Rev. 2021-1.0 Specifications subject to change without notice. 150ACDRS_S Series 150W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply Universal 85-264VAC (277VAC available) or 120-370VDC (390VDC available) input Withstand 300VAC surge input for 5s Operating ambient temperature range: -30°C to +70°C (can be start-up at -40°C) High I/O isolation test voltage up to 4000VAC (Input - output) Over-voltage class III (Designed to meet EN61558 standards) Low standby power consumption, low ripple & noise High efficiency, high reliability Output short circuit, over-current, over-voltage over-temperature protection Designed to meet UL/EN/ IEC62368, IEC/EN60335, IEC61558, UL61010 standards DIN rail TS35X7.5/ TS35X15 mountable Ultra-thin design: width 105mm (6SU) AC-DC Converter 150 Watt The 150ACDRS_S series is featuring a cost-effective, energy efficient solution for standard DIN-rail mounting. The product offer a high level of stability and immunity to noise, compliant with international IEC62368 standards for EMC and safety sepecifitions meet IEC/EN61000-4, CISPR32, EN55032, UL/EN/IEC62368, IEC/EN60335, IEC61558, UL61010. These light weight AC-DC converters also have an extremely compact design for space saving and are ideal for applications such as industrial control equipment machinery and all kinds of applications in a harsh environment. Example: 150ACDRS_48S 150 = 150 Watts; AC = AC-DC; DR = Din Rail; S = Case style; 48 = 48Vout; S = Single Output Output specifications Item Test conditions Min Typ Max Units Output voltage accuracy (0% - 100% load)

  • 12V Output
  • Other output Line regulation Rated load ±1 % Load regulation 230VAC ±1 % Ripple & Noise* (peak-to-peak value) 20MHz bandwidth
  • 12V Output
  • 15V Output
  • 24V Output
  • 48V Output 100 120 150 150 mV mV mV mV Temperature coefficient ±0.03 %/°C Stand-by power consumption 230VAC Input
  • 12/15/24V Output
  • 48V Output 0.30 0.40 W W Switching frequency 65 KHz Minimum Load 0 % Start-up delay time Room temperature 500 800 ms Hold-up Time 115VAC 230VAC ms ms * The “twisted pair-wire method” is used for ripple and noise test. Protection specifications Over-current Protection ≥105% Io, self-recovery
  • Hiccup mode or constant current limiting when output voltage <50%, recovers automatically afterfault condition is removed
  • Constant current limiting within 50% -100% rated output voltage, recovers automatically after fault condition is removed Over-voltage protection 12V Output 15V Output 24V Output 48V Output ≤16V (Output voltage clamp or hiccup) ≤23V (Output voltage clamp or hiccup) ≤35V (Output voltage clamp or hiccup) ≤60V (Output voltage clamp or hiccup) Over- temperature Protection Over-temperature Protection Activation 85 °C Max. Over-temperature Protection Deactivation 50 °C Min. Common specifications Short circut protection: Hiccup, continuous, self-recovery Operation temperature range: -30°C~+70°C Storage temperature range: -40°C ~+85°C Storage humidity range: < 95 %RH Operating Altitude: 2000m Power Derating: -40°C to 70°C 2.0 %/°C min 85VAC - 100VAC
  • 12V/15V 1.1 %/VAC min
  • 24V/48V 0.784 %/VAC min 100VAC - 120VAC
  • 12V 122.4 W
  • 15V 128.3 W
  • 24V 127.4 W
  • 48V 130.6 W Safety standards: UL/EN/IEC62368, EN/IEC60335, IEC61558, UL61010 Safety Class: CLASS II MTBF(MIL-HDBK-217F@25°C): >300,000 hours Case material: Plastic, heat-resistant (UL94V-0) Cooling: Free air convection Dimensions: 105.00 x 90.00 x 55.40 mm Weight: 330g Typ. Isolation specifications Item Test condition Min Typ Max Units Isolation Test (Input - Output) Electric Strength Test for 1min., ( leakage current°C 5mA )

4000 VAC

Note: 1. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta = 25°C, humidity <75% with nominal input voltage and rated output load; 2. All index testing methods in this datasheet are based on our company corporate standards; 3. We can provide product customization service, please contact our technicians directly for specific information; 4. Specifications are subject to change without prior notice. 5. Products are related to laws and regulations: see „Features“ and „EMC“; 6. Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified units. Input specifications Item Test conditions Min Typ Max Units Input Voltage Range AC input DC input 120 264 370 VAC VDC Input Frequency 47 63 Hz Input Current 115VAC 230VAC 3.0 1.8 A A Inrush Current 115VAC 230VAC A A Leakage Current 264VAC 0.5mA RMS max. Hot Plug Unavailable

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 3 150ACDRS_S – Rev. 2021-1.0 Specifications subject to change without notice. 150W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply 150ACDRS_S Series EMC specifications Emissions CE CISPR32/EN55032 CLASS B Emissions RE CISPR32/EN55032 CLASS B Emissions Harmonic current * IEC/EN61000-3-2 CLASS A Immunity ESD IEC/EN61000-4-2 Contact ±4KV/Air ±8KV Perf. Criteria A Immunity RS IEC/EN61000-4-3 10V/m perf. Criteria A Immunity EFT IEC/EN61000-4-4 ±4KV perf. Criteria B Immunity Surge IEC/EN61000-4-5 line to line ±2KV perf. Criteria A Immunity CS IEC/EN61000-4-6 10Vr.m.s perf. Criteria A Immunity Voltage dips, short interruptions and voltage variations immunity IEC/EN61000-4-11 0%, 70% perf. Criteria A Note: * Test harmonic current at 70% load. Approval Part Number Power [W] Output [Vo, VDC] Rated Current [A] Output Voltage Adjustable [Range, V]* Efficiency at 230VAC [%, Typ.] Capacitive Load [μF, Max.] 150ACDRS_12S 135.6 12V 11.3A 10.8-13.8 89 10000 150ACDRS_24S 150 24V 6.25A 21.6-29.0 91.5 5000 150ACDRS_48S 153.6 48V 3.2A 43.2-52.8 91 2400 * The actual adjustment range may extend outside the values stated, care should be exercised to ensure that the output voltage and power levels remain within the published maximum values. Product Selection Guide Typical characteristics Efficiency Note: 1. With an AC input between 85-100VAC and a DC input between 120-170VDC, the output power must be derated as per temperature derating curves; 2. This product is suitable for applications using natural air cooling; for applications in closed environment please consult factory or one of our FAE. 150ACDRS_12S 150ACDRS_24S 150ACDRS_48S 150ACDRS_12/15S 150ACDRS_24/48S 150ACDRS_12S 150ACDRS_24S 150ACDRS_48S

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 3 150ACDRS_S – Rev. 2021-1.0 Specifications subject to change without notice. 150W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply 150ACDRS_S Series Mechanical dimensions