1508365

1508365 PHOENIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

https://www.phoenixcontact.com/pi/products/1508365 09/11/2020 Page 1 / 9 Data connector - SACC-M12FS-5CON-PG 9 SH AU - 1508365 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Data connector, CAN Bus/DeviceNet, 5-position, shielded, Socket straight M12, Coding: A, Screw connection, Your advantages Safe use in the field, thanks to a high degree of protection Flexible: connectors for on-site assembly Screw connection: proven connection technology for a large selection of different conductors Reliable signal transmission - 360° shielding in environments with electromagnetic interference Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918900458 Technical data Dimensions Stripping length of the sheath 33 mm (for outside cable diameter < 5.5 mm, strip 21 mm off and fold the cable shield back over the cable sheath) Stripping length of the individual wire 5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Note NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. Rated current at 40°C 4 A

https://www.phoenixcontact.com/pi/products/1508365 09/11/2020 Page 2 / 9 Data connector - SACC-M12FS-5CON-PG 9 SH AU - 1508365 Technical data General Rated voltage 48 V AC

60 V DC

Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Signal type/category CAN Bus/DeviceNet Status display No Overvoltage category II Degree of pollution 3 Connection method Screw connection Conductor cross section AWG 24 ... 18 (without ferrule) 26 ... 20 (with ferrule) Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl)

0.2 Nm (Screw terminal blocks)

diameter) diameter) Tightening torque Screw plug insert with sleeve housing as far it will go Assembly instructions The wires can be connected both with ferrules and without ferrules Material Flammability rating according to UL 94 HB Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material of grip body Zinc die-cast, nickel-plated Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Standards and Regulations Standards/specifications M12 connector IEC 61076-2-101 Connection in acc. with standard CUL Flammability rating according to UL 94 HB Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years

https://www.phoenixcontact.com/pi/products/1508365 09/11/2020 Page 3 / 9 Data connector - SACC-M12FS-5CON-PG 9 SH AU - 1508365 Technical data Environmental Product Compliance For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Dimensional drawing M12 x 1 socket, straight, shielded

https://www.phoenixcontact.com/pi/products/1508365 09/11/2020 Page 4 / 9 Data connector - SACC-M12FS-5CON-PG 9 SH AU - 1508365 Schematic diagram Cable connection side M12 (screw connection)

https://www.phoenixcontact.com/pi/products/1508365 09/11/2020 Page 5 / 9 Data connector - SACC-M12FS-5CON-PG 9 SH AU - 1508365 Schematic diagram Pin assignment M12 socket, 5-pos., A-coded, socket side view Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27260700 eCl@ss 4.1 27260700 eCl@ss 5.0 27260700 eCl@ss 5.1 27260700 eCl@ss 6.0 27279200 eCl@ss 7.0 27440104 eCl@ss 8.0 27440104 eCl@ss 9.0 27440102

https://www.phoenixcontact.com/pi/products/1508365 09/11/2020 Page 6 / 9 Data connector - SACC-M12FS-5CON-PG 9 SH AU - 1508365 Classifications ETIM ETIM 2.0 EC001121 ETIM 3.0 EC002062 ETIM 4.0 EC002062 ETIM 5.0 EC002062 ETIM 6.0 EC002062 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 UNSPSC 18.0 39121413 UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413 Approvals Approvals Approvals UL Recognized / cUL Recognized / cULus Recognized Ex Approvals Approval details UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 221474 Nominal voltage UN 125 V Nominal current IN 4 A cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 221474 Nominal voltage UN 125 V

https://www.phoenixcontact.com/pi/products/1508365 09/11/2020 Page 7 / 9 Data connector - SACC-M12FS-5CON-PG 9 SH AU - 1508365 Approvals Nominal current IN 4 A cULus Recognized Accessories Accessories Cable end sleeve Ferrule - A 0,25- 5 - 3202465 Ferrule, length: 5 mm, color: silver Crimping tool Crimping pliers - CRIMPFOX 6H - 1212046 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry Plug for cable screw gland Screw plug - PROT-M12 MS-PA-CHAIN - 1430899 M12 sealing cap with fixing band, for sensor cables, for free M12 sockets Screwdriver tools

https://www.phoenixcontact.com/pi/products/1508365 09/11/2020 Page 8 / 9 Data connector - SACC-M12FS-5CON-PG 9 SH AU - 1508365 Accessories Tool - SACC BIT M12-D20 - 1208445 Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2- component grip, with non-slip grip Stripping tool Stripping tool - WIREFOX SAC - 1212623 Stripping pliers, for halogen-free sensor/actuator cables (SAC cables), with PUR and PVC insulation, from Ø of 4.4 to 7 mm, any stripping length Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors

https://www.phoenixcontact.com/pi/products/1508365 09/11/2020 Page 9 / 9 Data connector - SACC-M12FS-5CON-PG 9 SH AU - 1508365 Accessories Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm Stripping tool - VS-CABLE-STRIP-VARIO - 1657407 Stripping tool, for the multi-level stripping of shielded cables Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8

32825 Blomberg

Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com