1500 SCS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
This transparent metal-out static shielding bag is designed to provide static safe packaging for the shipment and/or storage of ESD sensitive items including outside ESD protected areas. Bags are printed with an ESD protective symbol and a lot code for traceability. Open Top and ZipTop styles are available. The bags are heat sealable. SCS Metal-Out Static Shielding Bags 1500 are manufactured from a top coated metallized polyester and polyethylene laminate. The proprietary top coating is designed to protect the metal layer and quickly discharge any electrical field. Polyester dielectric, in concert with the metal layer, provides shielding for the bag contents from Electrostatic Discharge (ESD) and helps minimize the penetration of an electrical field. DRAWING NUMBER
1500 Series
© 2017 DESCO INDUSTRIES INC. Employee Owned
1500 SERIES METAL-OUT STATIC SHIELDING BAG
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE: StaticControl.com PHONE (919) 718-0000 Metal-Out Static Shielding Bag 1500 This product is intended for commercial use only. This product is not on the Qualified Product Listing under the Defense Standardization Program. Tolerance: Width -0, +1/4" Length +/- 1/8" Offset 0 to 1/4" Seal width 3/8" with a tolerance of +/- 1/8" Open Top Bag ZipTop Bag Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Offset O to 0.250 Seal width +/- 0.125 Open Top Bag ZipTop Bag Specifications and procedures subject to change without notice. Physical Typical Value Testing Method Puncture Resistance 10 lbs, 44 N MIL-STD-3010 Method 2065 Seal Strength 14 lbs, 62 N ASTM D882 Thickness 3 mils, .0762 mm +/-10% MIL-STD-3010 Test Method
1003 Method B
Marking Adhesion Pass IPC-TM-650 2.4.1 Transparency 40% Tobias Electrical Typical Value Testing Method Discharge Shielding <10 nJ ANSI/ESD STM11.31 Surface Resistance - Interior 1 x 104 to < 1 x 1011 ohms ANSI/ESD STM11.11 Surface Resistance - Exterior 1 x 104 to < 1 x 106 ohms ANSI/ESD STM11.11 Charge Retention <100 volts 1410.515 Rev 2 Cleanliness Typical Value Testing Method Silicone Not Detected ASTM-E168 (FTIR) Heat Sealing Conditions Typical Value Temperature 300ºF – 375°F, 149ºC – 190°C Time 0.5 – 3.5 seconds Pressure 30 – 70 PSI, 206 – 482 KPa Meets ANSI/ESD S20.20, Packaging Standard ANSI/ESD S541, and Static Control Bag ANSI/ESD S11.4 Level 3 Note: Standard bag markings shown above and are not to scale. Bag is free of amines, N-octanoic acid, silicones and heavy metals. RoHS 3, REACH, and Conflict Minerals Statement None of the RoHS 3 restricted materials or REACH substances of very high concern as of 2017/07/07, or Conflict Minerals are intentionally added in manufacturing this product. Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE. See SCS Warranty, Limitation of Liability and Remedies Made in the United States of America