1458813 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector front mounting, 5-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 0.06 m, 0.34 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239857 Commercial data Item number 1458813 Packing unit 1 pc Minimum order quantity 100 pc Product key ABQCEE GTIN 4046356649292 Weight per piece (including packing) 18.3 g Weight per piece (excluding packing) 17.76 g Country of origin DE SACC-EC-M12MS-5CON-PG9/0,06 SN - Device connector front mounting 1458813 https://www.phoenixcontact.com/us/products/1458813 Apr 16, 2024, 5:53 AM Page 1 (8)

General Lock nut is included in the scope of delivery Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • Only use tools recommended by Phoenix Contact
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector Safety note SACC-EC-M12MS-5CON-PG9/0,06 SN - Device connector front mounting 1458813 https://www.phoenixcontact.com/us/products/1458813 Apr 16, 2024, 5:53 AM Page 2 (8)
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting type Front mounting Pg9 With locking nut Assembly instructions With locking nut Product properties Product type Circular connectors (device side) Number of positions 5 No. of cable outlets 1 Shielded no Coding A Thread type M12 Insulation characteristics Overvoltage category II Degree of pollution 3 Material specifications Flammability rating according to UL 94 V0 Seal material NBR Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 66 Material for screw connection Brass, nickel-plated Conductor material Tin-plated Cu litz wires Electrical properties Nominal voltage UN 60 V Nominal current IN 4 A Connection data Conductor connection Connection method Individual wires Contact connection type Pin Conductor cross section 0.34 mm² Tightening torque 2 Nm ... 3 Nm Connector Connection 1 Head design Pin SACC-EC-M12MS-5CON-PG9/0,06 SN - Device connector front mounting 1458813 https://www.phoenixcontact.com/us/products/1458813 Apr 16, 2024, 5:53 AM Page 3 (8)

Head cable outlet straight Head thread type M12 Coding A Connection 2 Head design free cable end Cable/line Cable length 0.06 m Cable type TPE litz wire Single wire, color black, brown,blue, white, gray Cable cross section 0.34 mm² Conductor material Tin-plated Cu litz wires AWG signal line 22 Environmental and real-life conditions Ambient conditions IP67Degree of protection IP67 -25 °C ... 85 °C (Plug / socket)Ambient temperature (operation) -25 °C ... 90 °C (cable, fixed installation) Standards and regulations Standard designation M12 connector Standards/specifications IEC 61076-2-101 SACC-EC-M12MS-5CON-PG9/0,06 SN - Device connector front mounting 1458813 https://www.phoenixcontact.com/us/products/1458813 Apr 16, 2024, 5:53 AM Page 4 (8)

Pin assignment M12 male connector, 5-pos., A-coded, male side SACC-EC-M12MS-5CON-PG9/0,06 SN - Device connector front mounting 1458813 https://www.phoenixcontact.com/us/products/1458813 Apr 16, 2024, 5:53 AM Page 5 (8)

ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 SACC-EC-M12MS-5CON-PG9/0,06 SN - Device connector front mounting 1458813 https://www.phoenixcontact.com/us/products/1458813 Apr 16, 2024, 5:53 AM Page 6 (8)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes Exemption 6(c) China RoHS EFUP-50Environment friendly use period (EFUP) An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. EU REACH SVHC REACH candidate substance (CAS No.) Lead(CAS: 7439-92-1) SCIP 792a9bf3-d4c0-4c6e-aee4-8837fdfb5107 SACC-EC-M12MS-5CON-PG9/0,06 SN - Device connector front mounting 1458813 https://www.phoenixcontact.com/us/products/1458813 Apr 16, 2024, 5:53 AM Page 7 (8)

https://www.phoenixcontact.com/us/products/1504084 Flat nut, Screw mounting, Pg9, cable gland Pg9, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239862 Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SACC-EC-M12MS-5CON-PG9/0,06 SN - Device connector front mounting 1458813 https://www.phoenixcontact.com/us/products/1458813 Apr 16, 2024, 5:53 AM Page 8 (8)